Free radical-assisted electrocoagulation processes for wastewater treatment

The combination of electrocoagulation with another process is a promising approach to enhance the removal efficiency of water pollutants. For instance, free radical-assisted electrocoagulation is a new combination showing higher performance. There are different combinations depending on the free radical source. This article reviews free radical-assisted electrocoagulation processes. We discuss electrocoagulation mechanisms; ozone-assisted electrocoagulation processes; advanced oxidation-assisted electrocoagulation processes; and ultrasound-assisted electrocoagulation. We present kinetic models used in free radical-assisted electrocoagulation, scale-up of free radical-assisted electrocoagulation and cost estimation. The major points are: most of the available studies have been done at laboratory scale with synthetic wastewater, and lack holistic and systematic approaches to consider the process complexity. The performance of the combined process is improved, and the removal efficiency is increased especially with ozone-assisted electrocoagulation, which gives a removal efficiency of more than 95%. The use of ultrasound energy with electrocoagulation is advantageous in reducing the problem of electrode passivation.     

Improved power density and Cr/Pb removal using ozone in a microbial desalination cell

Environmental Chemistry Letters - Microbial desalination cells are promising bio-electrochemical technologies for water desalination, treating wastewater and bioelectricity production. In this...     

Empirical likelihood confidence intervals for adaptive cluster sampling

Adaptive cluster sampling (ACS) is an efficient sampling design for estimating parameters of rare and clustered populations. It is widely used in ecological research. The modified Hansen-Hurwitz (HH) and Horvitz-Thompson (HT) estimators based on small samples under ACS have often highly skewed distributions. In such situations, confidence intervals based on traditional normal approximation can lead to unsatisfactory results, with poor coverage properties. Christman and Pontius (Biometrics 56:503–510, 2000) showed that bootstrap percentile methods are appropriate for constructing confidence intervals from the HH estimator. But Perez and Pontius (J Stat Comput Simul 76:755–764, 2006) showed that bootstrap confidence intervals from the HT estimator are even worse than the normal approximation confidence intervals. In this article, we consider two pseudo empirical likelihood functions under the ACS design. One leads to the HH estimator and the other leads to a HT type estimator known as the Hájek estimator. Based on these two empirical likelihood functions, we derive confidence intervals for the population mean. Using a simulation study, we show that the confidence intervals obtained from the first EL function perform as good as the bootstrap confidence intervals from the HH estimator but the confidence intervals obtained from the second EL function perform much better than the bootstrap confidence intervals from the HT estimator, in terms of coverage rate.     

Physico‐mechanical and Flammability Properties of Cyrtostachys renda Fibers Reinforced Phenolic Resin Bio-composites

Journal of Polymers and the Environment - The aim of this study is to investigate the effect of fiber length and loading on physico-mechanical and flammability properties of Cyrtostachys renda (CR)...     

Mechanochemical activation for lead extraction from spent cathode ray tube

Journal of Material Cycles and Waste Management - In this study, a mechanochemical activation technique to effectually extract lead from the funnel glass of cathode ray tube (CRT) is proposed. A...     

Attributes of Occupational Injury Among Workers in the Chemical Industry and Safety Issues

Case-study research was carried out with a view to find the attributes of occupational injury among workers in the chemical industry and to enhance safety issues. Injury data were collected and processed in terms of different variables, such as age, gender, skills, type of hazard, etc. Pareto analysis was then applied to find a pattern of occupational injury among the workers. The study revealed that 79.52% of the injured workers were in the 40–59 age group; 57.14% of accidents occurred during the 1st shift; 73.26% of accidents caused injury to hands, feet, chest to thigh, arms and eyes; and 70.93% of injuries were caused by pumps, carrying and lifting, vehicles, pipelines, valves, and grinding. Surprisingly, no one was injured in the group of temporary workers. The paper also provides specific suggestions followed by some action plans.     

Pulmonary Functions of Welders in Gas Transmission Pipelines in Iran

This study evaluated the influence of welding on pulmonary functions in welders. Spirometry tests were performed before and after work shift in 91 welders and 25 clerks (control group). We examined forced vital capacity (FVC), forced expiratory volume in 1 s (FEV1), FEV1/FVC ratio and forced expiratory flow 25%-75% (FEF 25–75). Significant differences were found for FVC and FEV1/FVC between welders and the control group in pre- and post-shift measurements (p < .001). In welders, smoking and nonsmoking habit had no significant effects on any pulmonary indices before or after shift. Work experience and fume concentrations also had no significant effects on the majority of spirometric indices (p > .05). Most welders had at least 1 of the respiratory symptoms. Significant differences were found between pre- and post-shift indices (as percentage of predicted values calculated with spirometer) and between the welders engaged in some welding tasks and the control group before work shift. This study documented work-related changes in pulmonary functions in the welders and marked drops in these functions without symptoms in some welders.     

Techno-Economic Study of CO2 Capture from an Existing Cement Plant Using MEA Scrubbing

Carbon dioxide is the major greenhouse gas responsible for global warming. Man-made CO₂ emissions contribute approximately 63% of greenhouse gases and the cement industry is responsible for approximately 5% of CO₂ emissions emitting nearly 900 kg of CO₂ per 1000 kg of cement. CO₂ from a cement plant was captured and purified to 98% using the monoethanolamine (MEA) based absorption process. The capture cost was $51 per tonne of CO₂ captured, representing approximately 90% of total cost. Steam was the main operating cost representing 39% of the total capture cost. Switching from coal to natural gas reduces CO₂ emissions by about 18%. At normal load, about 36 MW of waste heat is available for recovery to satisfy the parasitic heat requirements of MEA process; however, it is very difficult to recover.     

17β-estradiol and testosterone sorption in soil with and without poultry litter

17β-estradiol and testosterone are naturally occurring steroids that co-occur in poultry litter. The effects of litter on sorption of these hormones to soil are not known. Sorption isotherms were developed for C-labeled testosterone and H-labeled estradiol in a Cecil sandy clay loam with and without poultry litter addition. The effect of applying the hormones alone (single-sorbate) or together (multisorbate) was also investigated. C-testosterone sorption in soil increased from 2 to 48 h and remained relatively constant thereafter. H-estradiol sorption in soil was relatively constant from 2 to 24 h and then decreased to 72 h. These differences may reflect transformation of the parent hormones to products with different solid-phase affinity. The maximum sorption coefficient () in soil for C-testosterone (20.2 mL g) was similar to that for H-estradiol (19.6 mL g) in single-sorbate experiments. When hormones were applied together, sorption of both hormones in soil decreased, but the C-testosterone (12.5 mL g) was nearly twice as large as the H-estradiol (7.4 mL g). We propose this resulted from competition between the hormones and their transformation products for sorption sites, with C-testosterone and its expected transformation product (androstenedione) being better competitors than H-estradiol and its expected transformation product (estrone). When poultry litter was mixed with soil, sorption increased for H-estradiol but decreased for C-testosterone. This may have been because poultry litter slowed the transformation of parent hormones. Our results show that poultry litter could have important effects on the mobility of estradiol and testosterone.     

Food Insecurity in Pakistan: Causes and Policy Response

There is evidence of continued food insecurity and malnutrition in Pakistan despite significant progress made in terms of food production in recent years. According to “Vision 2030” of the Planning Commission of Pakistan, about half of the population in the country suffers from absolute to moderate malnutrition, with the most vulnerable being children, women, and elderly among the lowest income group. The Government of Pakistan has been taking a series of policy initiatives and strategic measures to combat food insecurity issues. These range from increasing production to food imports, implementation of poverty reduction strategies, nutritional improvement programs, as well as provision of social safety nets. The article aims to instill some fresh thinking into the debate regarding the challenges of food security. It underscores the limitations of hitherto policy response, and suggests crucial measures to improve the present grim scenario. Policy makers, planners, practitioners, and academicians in countries with comparable socio-political and economic setup can view this discussion as a case study and may apply the findings in their domain accordingly.