A hybrid model for robust design of sustainable closed-loop supply chain in lead-acid battery industry

Environmental Science and Pollution Research - Considering supply chain efficiency during the network design process significantly affect chain performance improvement. In this paper, the design...     

The formation of aerobic granular sludge for the treatment of real landfill leachate using a granular sequencing batch reactor at a constant volume

Leachate generated in a landfill may not be treated by conventional biological treatment due to its nature and complexity. The process of forming aerobic granules in batch sequencing reactors having features such as; reducing the settling process time and saving energy consumption and high decomposition rate have been noticed by researchers. In the present study, the structure of sequencing batch reactors (SBRs) was evaluated for the formation of granules, which were subsequently utilized for the treatment of landfill leachate. The experiment was initiated by using the GSBR, containing 1200 ml with different apparatuses, to develop granular sludge, and synthetic wastewater was added to reinforcement. The selected parameters for the operational hydraulic retention time (HRT) of the wastewater (6-h cycles) included feeding, idle, aeration, settling, and discharge. Furthermore, the controlled conditions were the dissolved oxygen (DO) range of 2–2.2 mg/L, temperature range of 20–23℃, and pH of 7.5–8.3. The chemical oxygen demand (COD), mixed liquor suspended solids (MLSS), and sludge volume index (SVI) daily were measured at the influent and effluent of GSBR reactor. The main properties of aerobic granular sludge were identified during the research procedures, and the remarkable settling and potent, high-density microbial structure of the granules were confirmed. The mean size of the formulated granules was estimated at 7.46 ± 1.8 mm, and the volume of the biomass also increased from approximately 1607 to 4137 mg/L through the granulation process. Moreover, 98% of the influent chemical oxygen demand (COD) could be removed by the formulated granular sludge, and the final-stage organic loading rate was estimated at 5.65 COD/m³/day. According to the results, GSBRs could be employed for the formulation of aerobic granular sludge for the treatment of landfill leachate.     

Multi-objective conflict resolution optimization model for reservoir’s selective depth water withdrawal considering water quality

Environmental Science and Pollution Research - This paper develops a multi-objective conflict resolution simulation-optimization model based on a leader-follower game to resolve conflicts between...     

Photocatalytic degradation of the acetaminophen by nanocrystal-engineered TiO2 thin film in batch and continuous system

• Photocatalytic activity was improved in TiO₂ thin film by rapid thermal annealing. • Photoreactor was designed for TiO₂ thin film. • Considerable reusability and durability of prepared photocatalysts were studied. Un-biodegradable pharmaceuticals are one of the major growing threats in the wastewaters. In the current study, TiO₂ thin film photocatalysts were designed by nanocrystal engineering and fabricated for degradation of the acetaminophen (ACE) in a photocatalytic reaction under UV light irradiation in batch and continuous systems. The photocatalyst was prepared by sputtering and then engineered by thermal treatment (annealing at 300℃ (T300) and 650℃ (T650)). The annealing effects on the crystallinity and photocatalytic activity of the TiO₂ film were completely studied; it was found that annealing at higher temperatures increases the surface roughness and grain size which are favorable for photocatalytic activity due to the reduction in the recombination rate of photo-generated electron-hole pairs. For the continuous system, a flat plate reactor (FPR) was designed and manufactured. The photocatalytic performance was decreased with the increase of flow rate because the higher flow rate caused to form the thicker film of the liquid in the reactor and reduced the UV light received by photocatalyst. The reusability and durability of the samples after 6 h of photocatalytic reaction showed promising performance for the T650 sample (annealed samples in higher temperatures).     

Spatial and temporal variability of fluoride concentrations in groundwater resources of Larestan and Gerash regions in Iran from 2003 to 2010

Environmental Geochemistry and Health - There is discrepancy about intervals of fluoride monitoring in groundwater resources by Iranian authorities. Spatial and temporal variability of fluoride in...     

Vertical oil dispersion profile under non-breaking regular waves

An experimental program was conducted to investigate vertical oil dispersion of surface oil spills under non-breaking regular waves. The variation in oil concentration caused by oil dispersion in a water column was studied to determine the vertical oil dispersion profile. The experiments were performed using different waves characteristics for different volumes of oil spill to evaluate the variation in oil concentration at three depths at two sampling stations. The correlations between oil concentration and the main parameters of wave characteristics, oil spill volume, sampling depth, and distance of sampling stations to spill location were assessed. The results revealed that the trend of variation in oil concentration versus wave steepness is linear. The results obtained from experimental measurements indicated that the oil concentrations at mid-depth were 44–77 % and the concentrations near the flume bed were 12–33 % of the concentration near the water surface.     

Cattle egrets as a biosentinels of persistent organic pollutants exposure

We investigated selected chlorinated pollutants (β-HCH, γ-HCH, DDDs, DDEs, o,p′-DDT, p,p′-DDT, heptachlor, aldrin, dieldrin, and endrin) in the Lahore and the Sialkot districts of Pakistan, using eggs of cattle egret (Bubulcus ibis) collected during May and June 2007. The pollutant with highest level and frequency was ΣDDT, followed by β-HCH, γ-HCH, heptachlor, aldrin, dieldrin, and endrin in descending order. The concentration(s) were significantly higher in Sialkot heronry for all the pollutants (except p,p′-DDT) than in Lahore. The values for DDTs, β-HCH, γ-HCH, and heptachlor were significantly higher (p < 0.05) in the egg(s) than in sediment(s) and in the chicks’ diet, due to biomagnification. Among DDTs analogues, p,p′-DDD was the major contaminant with >60 % of total DDT burden, reflecting the widespread aged as well as recent use of DDT as well as anaerobic degradation (DDD/DDE > 1 in many cases) in the nearby paddy soils. In few samples, p,p′-DDT/(DDD + DDE) > 0.5 suggested the recent emission patterns from surrounding contaminated areas of demolished DDT units and obsolete pesticide stores. The higher levels of HCHs (i.e., β-HCH) in the samples collected from Sialkot indicate exposure from long-term agricultural use. Overall, concentrations of all studied POPs were less than the threshold levels known to affect reproduction. Nevertheless, total DDTs and/or HCHs burdens in some eggs contained concentrations of greater than what would educe adverse effects on birds. This is among few studies on OCPs exposure to avian species, which provide the evidence of Pakistan’s contribution toward the Global POPs emission.     

Bootstrap confidence intervals for adaptive cluster sampling design based on Horvitz–Thompson type estimators

Perez and Pontius (J Stat Comput Simul 76:755–764, 2006) introduced several bootstrap methods under adaptive cluster sampling using a Horvitz–Thompson type estimator. Using a simulation study, they showed that their proposed methods provide confidence intervals with highly understated coverage rates. In this article, we first show that their bootstrap methods provide biased bootstrap estimates. We then define two bootstrap methods, based on the method of Gross (Proceeding of the survey research methods section. American Statistical Association, Alexandria, VA, pp 181–184, 1980) and Bootstrap With Replacement, that provide unbiased bootstrap estimates of the population mean with bootstrap variances matching the corresponding unbiased variance estimator. Using a simulation study, we show that the bootstrap confidence intervals based on our proposed methods have better performance than those based on available bootstrap methods, in the sense of having coverage proportion closer to the nominal coverage level. We also compare the proposed intervals to empirical likelihood based intervals in small samples.     

Applications of nanomaterials in water treatment and environmental remediation

Nanotechnology has revolutionized plethora of scientific and technological fields; environmental safety is no exception. One of the most promising and well- developed environmental applications of nanotechnology has been in water remediation and treatment where different nanomaterials can help purify water through different mechanisms including adsorption of heavy metals and other pollutants, removal and inactivation of patho- gens and transformation of toxic materials into less toxic compounds. For this purpose, nanomaterials have been produced in different shapes, integrated into various composites and functionalized with active components. Nanomaterials have also been incorporated in nanostructured catalytic membranes which can in turn help enhance water treatment. In this article, we have provided a succinct review of the most common and popular nanomaterials （titania, carbon nanotubes （CNTs）, zero-valent iron, dendrimers and silver nanomaterials） which are currently used in environmental remediation and particularly in water purification. The catalytic properties and functionalities of the mentioned materials have also been discussed.