Variations between rice cultivars in root secretion of organic acids and the relationship with plant cadmium uptake

To attempt to understand certain mechanisms causing the variations between rice cultivars with regard to Cd uptake and accumulation, pot soil experiments were conducted with two rice cultivars at different levels of Cd, i.e., 0 (the control), 10, 50 mg Cd kg⁻¹ soil. The two rice cultivars differ significantly with regard to Cd uptake and accumulation. Root secretions of low-molecular-weight organic acids (LMWOA) for each treatment were measured with ion chromatography. The results showed that LMWOA concentrations in the soil planted with Shan you 63 (a high soil Cd accumulator) were all higher than those in the soil planted with Wu yun jing 7 (low soil Cd accumulator) at different soil Cd levels, although the magnitudes of the differences varied for individual LMWOA and depend on soil Cd concentrations. For all six LMWOA, there were significant differences at P < 0.05 or < 0.01 levels for soils treated with 10 and 50 mg kg⁻¹ Cd. The magnitude of the differences was greater under soil Cd treatments, especially at relatively low levels (for example, 10 mg Cd kg⁻¹ soil), than in the control. Acetic acid and formic acid constituted more than 96% of the total concentration of the six LMWOA, while citric acid constituted only about 0.1%. The rice cultivar with higher concentrations of LMWOA in soil accumulated more Cd in the plants. The results indicate that LMWOA secretion by rice root, especially in Cd-contaminated soils, is likely to be one of the mechanisms determining the plant Cd uptake properties of rice cultivars.     

A review of the distribution of particulate trace elements in urban terrestrial environments and its application to considerations of risk

We review the evolution, state of the art and future lines of research on the sources, transport pathways, and sinks of particulate trace elements in urban terrestrial environments to include the atmosphere, soils, and street and indoor dusts. Such studies reveal reductions in the emissions of some elements of historical concern such as Pb, with interest consequently focusing on other toxic trace elements such as As, Cd, Hg, Zn, and Cu. While establishment of levels of these elements is important in assessing the potential impacts of human society on the urban environment, it is also necessary to apply this knowledge in conjunction with information on the toxicity of those trace elements and the degree of exposure of human receptors to an assessment of whether such contamination represents a real risk to the city’s inhabitants and therefore how this risk can be addressed.     

Rapid assessment of different oxygenic phototrophs and single-cell photosynthesis with multicolour variable chlorophyll fluorescence imaging

We present a new system for microscopic multicolour variable chlorophyll fluorescence imaging of aquatic phototrophs. The system is compact and portable and enables microscopic imaging of photosynthetic performance of individual cells and chloroplasts using different combinations of blue, green, red or white light. Automated sequential exposure of microscopic samples to the three excitation colours enables subsequent deconvolution of the resulting fluorescence signals and colour marking of cells with different photopigmentation, i.e., cyanobacteria, green algae, red algae and diatoms. The photosynthetic activity in complex mixtures of phototrophs and natural samples can thus be assigned to different types of phototrophs, which can be quantified simultaneously. Here, we describe the composition and performance of the new imaging system and present applications with both natural phytoplankton and microalgal culture samples.     

Photo-polymerization of triclosan in aqueous solution induced by ultraviolet radiation

The formation of 2,8-dichlorodibenzo-p-dioxin and other harmful degradation products in the photo-degradation process of triclosan is of increasing concern. Here we worked on the identification of polymerized products at high triclosan concentration and on the mechanism of photoreaction. Five dimmers and two trimers of triclosan were detected by liquid chromatography-mass spectrum analysis. 2,8-dichlorodibenzo-p-dioxin was also identified by comparing with an authentic standard. Relatively low pH and high concentration favored the polymerization of triclosan. Three main routes of photoreaction were postulated, namely dechlorination, ring closure and polymerization.     

Effects of an iron-silicon material,a synthetic zeolite and an alkaline clay on vegetable uptake of As and Cd from a polluted agricultural soil and proposed remediation mechanisms

Economic and highly effective methods of in situ remediation of Cd and As polluted farmland in mining areas are urgently needed. Pot experiments with Brassica chinensis L. were carried out to determine the effects of three soil amendments [a novel iron-silicon material (ISM), a synthetic zeolite (SZ) and an alkaline clay (AC)] on vegetable uptake of As and Cd. SEM–EDS and XRD analyses were used to investigate the remediation mechanisms involved. Amendment with ISM significantly reduced the concentrations of As and Cd in edible parts of B. chinensis (by 84–94 % and 38–87 %, respectively), to levels that met food safety regulations and was much lower than those achieved by SZ and AC. ISM also significantly increased fresh biomass by 169–1412 % and 436–731 % in two consecutive growing seasons, while SZ and AC did not significantly affect vegetable growth. Correlation analysis suggested that it was the mitigating effects of ISM on soil acidity and on As and Cd toxicity, rather than nutrient amelioration, that contributed to the improvement in plant growth. SEM–EDS analysis showed that ISM contained far more Ca, Fe and Mn than did SZ or AC, and XRD analysis showed that in the ISM these elements were primarily in the form of silicates, oxides and phosphates that had high capacities for chemisorption of metal(loid)s. After incubation with solutions containing 800 mg L^?1 AsO₄ ^2? or Cd²⁺, ISM bound distinctly higher levels of As (6.18 % in relative mass percent by EDS analysis) and Cd (7.21 % in relative mass percent by EDS analysis) compared to SZ and AC. XRD analysis also showed that ISM facilitated the precipitation of Cd²⁺ as silicates, phosphates and hydroxides, and that arsenate combined with Fe, Al, Ca and Mg to form insoluble arsenate compounds. These precipitation mechanisms were much more active in ISM than in SZ or AC. Due to the greater pH elevation caused by the abundant calcium silicate, chemisorption and precipitation mechanisms in ISM treatments could be further enhanced. That heavy metal(loid)s fixation mechanisms of ISM ensure the remediation more irreversible and more resilient to environmental changes. With appropriate application rate and proper nutrients supplement, the readily available and economic ISM is a very promising amendment for safe crop production on multi-metal(loids) polluted soils.     

Arsenic occurrence in Brazil and human exposure

Environmental exposure to arsenic (As) in terms of public health is receiving increasing attention worldwide following cases of mass contamination in different parts of the world. However, there is a scarcity of data available on As geochemistry in Brazilian territory, despite the known occurrence of As in some of the more severely polluted areas of Brazil. The purpose of this paper is to discuss existing data on As distribution in Brazil based on recent investigations in three contaminated areas as well as results from the literature. To date, integrated studies on environmental and anthropogenic sources of As contamination have been carried out only in three areas in Brazil: (1) the Southeastern region, known as the Iron Quadrangle, where As was released into the drainage systems, soils and atmosphere as a result of gold mining; (2) the Ribeira Valley, where As occurs in Pb-Zn mine wastes and naturally in As-rich rocks and soils; (3) the Amazon region, including the Santana area, where As is associated with manganese ores mined over the last 50 years. Toxicological studies revealed that the populations were not exposed to elevated levels of As, with the As concentrations in surface water in these areas rarely exceeding 10 microg/L. Deep weathering of bedrocks along with formation of Fe/Al-enriched soils and sediments function as a chemical barrier that prevents the release of As into the water. In addition, the tropical climate results in high rates of precipitation in the northern and southeastern regions and, hence, the As contents of drinking water is diluted. Severe cases of human As exposure related to non-point pollution sources have not been reported in Brazil. However, increasing awareness of the adverse health effects of As will eventually lead to a more complete picture of the distribution of As in Brazil.     

Abundance,distribution and prey composition of scyphomedusae in the southern North Sea

The annual cycle of abundance and distribution of the scyphozoan medusae Aurelia aurita, Cyanea lamarckii, C. capillata and Chrysaora hysoscella were studied in the southern North Sea in 2004 and 2005. Three different patterns of seasonal occurrence of medusae were distinguished: (1) the early occurring C. lamarckii (February–August), (2) C. capillata and A. aurita (April–August) and (3) the late appearing C. hysoscella (July/August–September). Cyanea lamarckii was the most frequently encountered species in this study; its highest mean abundance was 1.8 ± 2.7 ind. 100 m⁻³. The prey spectra of C. lamarckii, C. capillata and C. hysoscella contained several copepod and other crustacean species and thus make them potential competitors with fish larvae. Medusae in this study also consumed fish eggs and larvae, including clupeids, in all months analysed. Although peak spawning of sprat (Sprattus sprattus) coincides with the maximum abundance of medusae (May–June) the relative low abundance of all medusae species in this study makes jellyfish predation unlikely to be a factor controlling sprat recruitment in the time frame investigated.     

Formation of disinfection byproducts from accumulated soluble products of oleaginous microalga after chlorination

When microalgae are simultaneously applied for wastewater treatment and lipid production, soluble algal products (SAP) should be paid much attention, as they are important precursors for formation of disinfection byproducts (DBPs), which have potential risks for human health. Chlorella sp. HQ is an oleaginous microalga that can generate SAP during growth, especially in the exponential phase. This study investigated the contribution of SAP from Chlorella sp. HQ to DBP formation after chlorination. The predominant DBP precursors from SAP were identified with the 3D excitation-emission matrix fluorescence. After chlorination, a significant reduction was observed in the fluorescence intensity of five specific fluorescence regions, particularly aromatic proteins and soluble microbial by-product-like regions, accompanied with slight shifting of the peak. The produced DBPs were demonstrated to include trihalomethanes and haloacetic acids. As the algal cultivation time was extended in wastewater, the accumulated SAP strengthened the formation of DBPs. The trend for DBP formation was as follows: chloroform>dichloroacetic acid>trichloroacetic acid.

Open image in new window

     

Cadmium (Cd) distribution and contamination in Chinese paddy soils on national scale

Rice is a staple food by an increasing number of people in China. As more issues have arisen in China due to rice contaminated by cadmium (Cd), Cd contamination in arable soils has become a severe problem. In China, many studies have examined Cd contamination in arable soils on a national scale, but little studies have focused on the distribution of Cd in paddy fields. This study explored the spatial pattern of Cd in paddy soils in China, made a preliminary evaluation of the potential risk, and identified the most critically contaminated regions based on the domestic rough rice trade flow. The results showed that Cd concentrations in paddy soils in China ranged from 0.01 to 5.50 mg/kg, with a median value of 0.23 mg/kg. On average, the highest Cd concentrations were in Hunan (0.73 mg/kg), Guangxi (0.70 mg/kg), and Sichuan (0.46 mg/kg) provinces. Cd concentrations in paddy soils in central and western regions were higher than those in eastern regions, especially the southeastern coastal regions. Of the administrative regions, Cd standard exceedance rate was 33.2 %, and the heavy pollution rate was 8.6 %. Regarding to Cd of paddy soil, soil environmental quality was better in Northeast China Plain than in Yangtze River Basin and southeastern coastal region. Mining activities were the main anthropogenic pollution source of Cd in Chinese paddy soil. Based on rice trade, more of the Chinese population would be exposed to Cd through intake of rice produced in Hunan province. Certain regions that output rice, especially Hunan province, should be given priority in the management and control of Cd contamination in paddy soil.     

Characterization and optimization of long-term controlled release system for groundwater remediation: a generalized modeling approach

A well-based reactive barrier system using controlled-release KMnO4 has been recently developed as a long-term in situ treatment option for plumes of dense and non-aqueous phase liquids in groundwater. In order to take advantage of the merits of controlled release systems (CRS) in environmental remediation, the release behavior needs to be optimized for the hydrologic and environmental conditions of target treatment zone. Where release systems are expected to be operated over long times, like for the reactive barriers, it may only be practical to describe the long-term behavior numerically. We developed a numerical model capable of describing release characteristics associated with variable forms and structures of long-term CRS. Sensitivity analyses and illustrative simulations showed that the release kinetics and durations would be constrained by changes in agent solubility, bulk diffusion coefficients, or structures of the release devices. The generality of the numerical model was demonstrated through simulations for CRS with monolithic and double-layered matrices. The generalized model was then used for actual design and analyses of an encapsulated-matrix CRS, which can yield constant release kinetics for several years. A well-based reactive barrier system (4.05 x 10(3)m3) using the encapsulated-matrix CRS can release approximately 1.65 kg of active agent (here MnO4(-)) daily over the next 6.6 yr, creating prolonged reaction zone in the subsurface. The generalized model-based, target-specific approach using the long-term CRS could provide practical tool for improving the efficacy of advanced in situ remediation schemes such as in situ chemical oxidation, bioremediation, or in situ redox manipulation. Development of techniques for adjusting the bulk diffusion coefficients of the release matrices and facilitating the lateral spreading of the released agent is warranted.