Evaluation of alternative filter media for particulate matter emission testing of residential wood heating devices

The performance of Teflon-coated glass fiber filter media (Pallflex Emfab TX40) is evaluated for particulate matter (PM) sampling of residential wood heating devices in a dilution tunnel. Thirty samples of varying duration and PM loading and concentration were collected from an U.S. Environmental Protection Agency (EPA) Method 28 dilution tunnel using dual Method 5G sample trains with untreated glass fiber and Emfab filters. Filters were weighed soon after the end of sampling and again the next day after equilibration at 35% relative humidity (RH). PM concentrations from both types of filters agreed very well with 1-day equilibration, demonstrating that Emfab filters are appropriate for use in measuring PM from residential wood burning appliances in a dilution tunnel and have performance equal to or better than the glass fiber filter media. Agreement between filter media without equilibration was erratic, with PM from glass fiber filter samples varying from slightly less than the Emfab samples to as much as 2.8 times higher. Some of the glass fiber filters lost substantial mass with equilibration, with the highest percent loss at lower filter mass loadings. Mass loss for Emfab samples was a small percentage of the mass and very consistent across the range of mass loadings. Taken together, these results may indicate water uptake on the glass fiber media that is readily removed with 1-day equilibration at moderate RH conditions.

Implications: EPA regulations now allow the use of either glass fiber or Teflon filter media for wood appliance PM emission testing. Teflon filter media minimizes the potential for acid-gas PM artifacts on glass fiber filters; this is important as EPA moves toward the use of locally sourced cordwood for testing that may have higher sulfur content. This work demonstrates that the use of Teflon-coated glass fiber filters can give similar PM measurement results to glass fiber filters after 1 day of equilibration. With no equilibration, measured PM from glass fiber filters was usually higher than from Teflon-coated glass fiber filters.     

Cross-Boundary Coordination on Forested Landscapes: Investigating Alternatives for Implementation

Cross-boundary coordination is a tool for ecosystem management whereby landowners voluntarily coordinate management practices toward economic and/or ecological landscape-scale outcomes (e.g., fiber, invasive species control, habitat). Past research indicates that it may be particularly applicable on landscapes that include small forest landholdings. To explore alternatives by which coordination might occur, we conducted seven focus groups with landowners (n = 51) who actively manage their forests in southwest Wisconsin and northeast Iowa. Focus group participants were presented with three hypothetical alternatives to coordinate with their neighbors; landowners could self-organize, work with a natural resource professional (i.e., forester), or work with an organization to complete a cross-boundary practice. In this article, we focus on the latter two alternatives and the role of two social theories—principal-agent and cooperation—in explaining landowners’ evaluations of these alternatives. Key findings are that (1) cross-boundary coordination has the potential to alleviate problems between landowners and resource professionals inherent to their typical working relationship, and (2) social relationships are a major factor contributing to landowners’ willingness to participate. We posit that cross-boundary coordination offers a non-economic incentive for landowners to work together as it may reduce the uncertainty associated with hiring a resource professional. At the same time, professionals can provide a bridging function among landowners who are unacquainted. To achieve these outcomes and expand the adoption of cross-boundary coordination, we suggest four guidelines. First, foster dialogue among landowners toward shared cognition and oversight. Second, match landowners’ practices and objectives such that there are clear benefits to all. Third, develop relationships through low risk activities where possible. Fourth, do not expect on-going commitments.

Analyzing alternative bio-waste feedstocks for potential biodiesel production using time domain (TD)-NMR

Production of biodiesel is currently limited due to lack of economically beneficial feedstocks. Suitability of municipal wastewater sludge and olive mill waste as feedstocks for biodiesel production was evaluated. The various bio-waste sources were analyzed for their oil content and fatty acid composition using conventional analyses complemented with time domain (TD)-NMR analysis. TD-NMR, a rapid non-destructive method newly applied in this field, yielded good correlations with conventional methods. Overall biodiesel yields obtained by TD-NMR analysis were 7.05% and 9.18% (dry wt) for olive mill pomace and liquid wastes, and 11.92%, 7.07%, and 4.65% (dry wt) for primary, secondary, and anaerobically stabilized sludge, respectively. Fatty acid analysis indicated fundamental suitability of these agro-industrial waste resources for biodiesel production. Evaluation of bio-waste materials by TD-NMR revealed the potential of this tool to identify waste-oil sources cost effectively and quickly, supporting expansion of a sustainable biodiesel industry in Israel and other regions.     

TECHNIQUES FOR DETECTING TRENDS IN LAKE WATER QUALITY1

ABSTRACT: With the advent of standards and criteria for water quality variables, there has been an increasing concern about the changes of these variables over time. Thus, sound statistical methods for determining the presence or absence of trends are needed. A Trend Detection Method is presented that provides: 1) Hypothesis Formulation - statement of the problem to be tested, 2) Data Preparation - selection of water quality variable and data, 3) Data Analysis - exploratory data analysis techniques, and 4) Statistical Tests - tests for detecting trends. The method is utilized in a stepwise fashion and is presented in a nonstatistical manner to allow use by those not well versed in statistical theory. While the emphasis herein is on lakes, the method may be adopted easily to other water bodies.     

INTEGRATING GEOGRAPHIC INFORMATION SYSTEMS AND MODFLOW FOR GROUND WATER RESOURCE ASSESSMENTS1

ABSTRACT: The Floridan Aquifer is the primary source of water in the coastal area of Santa Rosa County, Florida. In order to optimize well field design and analyze aquifer stress problems, the USGS MODFLOW code (McDonald and Harbaugh, 1988) is applied to develop a numerical computer model of the aquifer. The Geographical Information System (GIS) is the primary tool used in the development of the model grid, performance of the modeling procedure, and model analysis. The GIS is used in generating multiple grids in which to simulate both regional scale and local scale flow. The grid topology is recorded in geographic coordinates which facilitates geo-referencing and orientation of the grid to base maps and data coyerages. The GIS allows data transfer from various coverages to the nodes of the block centered grid where hydrogeologic information is stored as attributes to the grid coverage. From this grid coverage, pertinent information is queried within the GIS environment and used to generate the input files for the MODFLOW simulation. After MODFLOW execution, simulated heads and drawdown are imported into the grid coverage where residual error and recharge rates can be calculated. Contoured surfaces are then created for selected data sets including simulated heads, drawdown, residual error, and recharge rates. Model calibration is conducted utilizing the GIS to generate and process data sets associated with model simulations.     

A Framework for Developing Management Goals for Species at Risk with Examples from Military Installations in the United States

A decision framework for setting management goals for species at risk is presented. Species at risk are those whose potential future rarity is of concern. Listing these species as threatened or endangered could potentially result in significant restrictions to activities in resource management areas in order to maintain those species. The decision framework, designed to foster proactive management, has nine steps: identify species at risk on and near the management area, describe available information and potential information gaps for each species, determine the potential distribution of species and their habitat, select metrics for describing species status, assess the status of local population or metapopulation, conduct threat assessment, set and prioritize management goals, develop species management plans, and develop criteria for ending special species management where possible. This framework will aid resource managers in setting management goals that minimally impact human activities while reducing the likelihood that species at risk will become rare in the near future. The management areas in many of the examples are United States (US) military installations, which are concerned about potential restrictions to military training capacity if species at risk become regulated under the US Endangered Species Act. The benefits of the proactive management set forth in this formal decision framework are that it is impartial, provides a clear procedure, calls for identification of causal relationships that may not be obvious, provides a way to target the most urgent needs, reduces costs, enhances public confidence, and, most importantly, decreases the chance of species becoming more rare.     

A Simple Model that Identifies Potential Effects of Sea-Level Rise on Estuarine and Estuary-Ecotone Habitat Locations for Salmonids in Oregon, USA

Diadromous aquatic species that cross a diverse range of habitats (including marine, estuarine, and freshwater) face different effects of climate change in each environment. One such group of species is the anadromous Pacific salmon (Oncorhynchus spp.). Studies of the potential effects of climate change on salmonids have focused on both marine and freshwater environments. Access to a variety of estuarine habitat has been shown to enhance juvenile life-history diversity, thereby contributing to the resilience of many salmonid species. Our study is focused on the effect of sea-level rise on the availability, complexity, and distribution of estuarine, and low-freshwater habitat for Chinook salmon (Oncorhynchus tshawytscha), steelhead (anadromous O. mykiss), and coho salmon (O. kisutch) along the Oregon Coast under future climate change scenarios. Using LiDAR, we modeled the geomorphologies of five Oregon estuaries and estimated a contour associated with the current mean high tide. Contour intervals at 1- and 2-m increments above the current mean high tide were generated, and changes in the estuary morphology were assessed. Because our analysis relied on digital data, we compared three types of digital data in one estuary to assess the utility of different data sets in predicting the changes in estuary shape. For each salmonid species, changes in the amount and complexity of estuarine edge habitats varied by estuary. The simple modeling approach we applied can also be used to identify areas that may be most amenable to pre-emptive restoration actions to mitigate or enhance salmonid habitat under future climatic conditions.