Performance evaluation of a continuous flow photocatalytic reactor for wastewater treatment

A novel photocatalytic reactor for wastewater treatment was designed and constructed. The main part of the reactor was an aluminum tube in which 12 stainless steel circular baffles and four quartz tube were placed inside of the reactor like shell and tube heat exchangers. Four UV–C lamps were housed within the space of the quartz tubes. Surface of the baffles was coated with TiO₂. A simple method was employed for TiO₂ immobilization, while the characterization of the supported photocatalyst was based on the results obtained through performing some common analytical methods such as X-ray diffraction (XRD), scanning electron microscope (SEM), and BET. Phenol was selected as a model pollutant. A solution of a known initial concentration (20, 60, and 100 ppmv) was introduced to the reactor. The reactor also has a recycle flow to make turbulent flow inside of the reactor. The selected recycle flow rate was 7?×?10^?5 m³.s^?1, while the flow rate of feed was 2.53?×?10^?7, 7.56?×?10^?7, and 1.26?×?10^?6 m³.s^?1, respectively. To evaluate performance of the reactor, response surface methodology was employed. A four-factor three-level Box–Behnken design was developed to evaluate the reactor performance for degradation of phenol. Effects of phenol inlet concentration (20–100 ppmv), pH (3–9), liquid flow rate (2.53?×?10^?7?1.26?×?10^?6 m³.s^?1), and TiO₂ loading (8.8–17.6 g.m^?2) were analyzed with this method. The adjusted R ² value (0.9936) was in close agreement with that of corresponding R ² value (0.9961). The maximum predicted degradation of phenol was 75.50 % at the optimum processing conditions (initial phenol concentration of 20 ppmv, pH?～?6.41, and flow rate of 2.53?×?10^?7 m³.s^?1 and catalyst loading of 17.6 g.m^?2). Experimental degradation of phenol determined at the optimum conditions was 73.7 %. XRD patterns and SEM images at the optimum conditions revealed that crystal size is approximately 25 nm and TiO₂ nanoparticles with visible agglomerates distribute densely and uniformly over the surface of stainless steel substrate. BET specific surface area of immobilized TiO₂ was 47.2 and 45.8 m² g^?1 before and after the experiments, respectively. Reduction in TOC content, after steady state condition, showed that maximum phenol decomposition occurred at neutral condition (pH?～?6). Figure

The schematic view of the experimental set-up     

Numerical simulation of airflow and particle distributions with floor circular swirl diffuser for underfloor air distribution system in an office environment

Environmental Science and Pollution Research - In the present study, an underfloor air distribution (UFAD) system with a circular swirl diffuser was simulated in an office room using a...     

Factors Influencing Unsafe Behaviors and Accidents on Construction Sites: A Review

Objective. Construction is a hazardous occupation due to the unique nature of activities involved and the repetitiveness of several field behaviors. The aim of this methodological and theoretical review is to explore the empirical factors influencing unsafe behaviors and accidents on construction sites. Methods. In this work, results and findings from 56 related previous studies were investigated. These studies were categorized based on their design, type, methods of data collection, analytical methods, variables, and key findings. A qualitative content analysis procedure was used to extract variables, themes, and factors. In addition, all studies were reviewed to determine the quality rating and to evaluate the strength of provided evidence. Results. The content analysis identified 8 main categories: (a) society, (b) organization, (c) project management, (d) supervision, (e) contractor, (f) site condition, (g) work group, and (h) individual characteristics. The review highlighted the importance of more distal factors, e.g., society and organization, and project management, that may contribute to reducing the likelihood of unsafe behaviors and accidents through the promotion of site condition and individual features (as proximal factors). Conclusion. Further research is necessary to provide a better understanding of the links between unsafe behavior theories and empirical findings, challenge theoretical assumptions, develop new applied theories, and make stronger recommendations.     

Mid-depth oil concentration due to vertical oil dispersion in a regular wave field

An experimental program is organized to investigate the vertical oil dispersion of surface oil spills in a regular wave field. Various waves characteristics and different volumes of oil spills are tested to assess the oil concentration variations at two sampling stations. It is found that the oil concentration due to vertical oil dispersion follows an ascending diagram to reach a maximum and then decreases while oil slick passes the location. The maximum mid-depth oil concentration (C_max) at the farther sampling station is 30–50 % less than the concentration at the closer sampling station to the spill location. A 50 % increase in oil spill volume causes 30–60 % growth in oil concentrations. The relations between oil concentration and important parameters such as wave characteristics, amount of spilled oil and the distance of sampling stations from the spill location are indicated and also oil concentration variations are quantified. Two equations are derived through statistical analysis of the obtained experimental data, which estimate the magnitude and time of maximum oil concentration.     

Hospital waste generation and management in some provinces of Iran

The purpose of this investigation was to determine the rate of generation of different kinds of hospital waste and its management in 11 provinces of Iran in 2012. Waste samples were separated into two categories (domestic type and infectious waste) and weighed daily for 4 weeks, distributed over four seasons to determine quantities and composition. Data on waste management were collected through a questionnaire and interviews of hospital personnel. The total generation of hospital waste ranged from 2.3 to 4.6 kg bed-day^?1 for Razavi Khorasan and Sistan &; Baluchistan provinces. Generation of infectious waste varied from 1.0 to 1.7 kg bed-day^?1 for Sistan &; Baluchistan and Markazi provinces. The lowest and highest percentages of infectious waste generation were found in Golistan (3.8%) and Fars (15.3%). It was also revealed that management of sharps, infectious, and other hazardous wastes was not properly done. A segregation program must be implemented and each fraction of hospital waste must be collected and disposed of separately.     

Occupational Cognitive Failure and Its Relationship With Unsafe Behaviors and Accidents

Objectives. The aim of this study was to assess the relationship between occupational cognitive failures (OCFs) and unsafe behaviors, accidents and driving offences among municipal bus drivers in Tehran, Iran. Methods. Systematic random sampling was used to select 190 drivers from 3 transport and traffic Tehran districts. Data were collected with the occupational cognitive failure questionnaire (OCFQ), the driver behavior questionnaire and a data collection form. Results. The mean (SD) numbers of driving-related offences and road traffic accidents were 1.5 (2.6) and 0.37 (1.0), respectively. The mean (SD) numbers of deliberate driving violations, unintended violations, driving slips and mistakes were 6.97 (5.5), 1.61 (1.5), 13.6 (9.0) and 4.53 (3.28), respectively. The mean (SD) number of the OCFs was 28.9 (20.5). A significant correlation was found between occupational cognitive error and unsafe driving behavior subscales. The stepwise logistic regression results showed that, while controlling the effects of confounding factors, the OCF predicts 6%, 9%, 15% and 9% of deliberate violations, unintended violations, driving slips and driving mistakes, respectively. Conclusion. The results of this study show that the score of the OCFQ is a predictor of unsafe driving behaviors and its subscales.     

Carbon footprint calculation in one of the largest Gas Refinery Companies in the Middle East

Environmental Science and Pollution Research - Rapid technological advances in the natural gas industry raised access to natural gas reserves, related to increased greenhouse gas emissions,...     

Performance evaluation of sustainable projects: a possibilistic integrated novel analytic hierarchy process-data envelopment analysis approach using Z-Number information

Environment, Development and Sustainability - Selecting a proper set of projects is an important issue to make crucial decisions for many project-oriented organizations enabling them to achieve...     

A game-theoretic approach to designing an optimal code of conduct program to promote supplier sustainability in a supply chain

Environmental Science and Pollution Research - In recent years, suppliers in developing countries face the challenge of their low technological and knowledge-related capabilities to enhance...