Development of Water-Borne Green Polymer Used as a Potential Nano Drug Vehicle and its In Vitro Release Studies

This paper describes an ecofriendly development of a nanodrug delivery vehicle from seed oil. The entire synthesis, starting from the ZnO nanoparticle to the polymeric vehicle is purely microwave assisted with minimal usage of organic solvents. Multifunctional features like enhanced UV absorbance, antimicrobial properties and appreciable in vitro release can be attributed to the nanoparticle loaded polymeric vehicle. Characterization of the synthesized species was done through FT-IR, ¹HNMR, SEM and XRD. The physical characterizations were carried out using conventional laboratory techniques.     

Fabrication and Characterization of Biodegradable Composite Films Made of Using Poly(caprolactone) Reinforced with Chitosan

Chitosan was dissolved in 2?% aqueous acetic acid solution and the films were prepared by solution casting. Values of tensile strength (TS), tensile modulus (TM), elongation at break (Eb?%) and water vapor permeability (WVP) of the chitosan films were found to be 30?MPa, 450?MPa, 8?% and 4.7?g?mm/m²?day?kPa, respectively. Poly(caprolactone) (PCL) films were prepared from its granules by compression molding and the values of TS, TM, Eb and WVP were 14?MPa, 220?MPa, 70?% and 1.54?g?mm/m²?day?kPa, respectively. PCL was reinforced with chitosan films, and composite films were prepared by compression molding. Amount of chitosan in the composite films varied from 10 to 50?% (w/w). It was found that with the incorporation of chitosan films in PCL, both the values of TS and TM of composite films increased significantly. The highest mechanical properties were found at 50?% (w/w) of chitosan content. The Oxygen transmission rate (OTR) of composite film was found to decrease significantly than PCL films. Thermal properties of the composite were also improved as compared to PCL. The water uptake test of the composite also showed promising results with a good stability of composite films. The interface of the composite was investigated by scanning electron microscopy and showed good interfacial adhesion between PCL and chitosan films.     

Elevated blood lead levels and cytogenetic markers in buccal epithelial cells of painters in India

Background, aim, and scope  

Lead, a major contaminant, is highly used in paint manufacturing due to its anticorrosive properties. Recent reports indicated high lead content among Indian paints used for commercial purposes. Painters are continuously exposed to these lead containing paints during painting of both commercial as well as residential buildings. Lead is well-known for its genotoxicty in occupational workers; however, in Indian painters the genotoxic effects of lead have not been reported to date. Therefore we aimed to study the genotoxic end points in painters due to their long-term exposure to these high lead-containing Indian paints.     

A simple ligandless microextraction method based on ionic liquid for the determination of trace cadmium in water and biological samples

A simple and efficient ionic liquid-based ligandless microextraction method has been developed for preconcentration of cadmium ions (Cd²⁺) as a step prior to its determination by flame atomic absorption spectrometry (FAAS) with a micro-sample introduction system. In this approach, the ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆] and ethanol were used as extractant and dispersive solvents to preconcentrate the Cd²⁺ in different waters, acid digested scalp hair, and nail samples. Some analytical parameters influencing the extraction efficiency of Cd²⁺ and its subsequent determination, including pH, IL volume, dispersant solvent volume, sample volume, temperature, incubation time, and matrix effect, were optimized. Under optimal conditions, the limit of detection (LOD), limit of quantification (LOQ), and enhancement factor (EF) were 0.4 μg L^?1, 1.3 μg L^?1, and 50, respectively. The relative standard deviation (RSD) of 100 μgL^?1 Cd²⁺ was 4.3% (n = 6). The validity of the proposed method was checked by determining Cd²⁺ in certified reference material (TM-25.3 fortified water) and standard addition; the results showed sufficient recovery (>98%) of Cd²⁺ within the certified value. The method was applied for preconcentration and determination of cadmium in waters and biological samples.     

Acute toxicity of copper sulphate to fresh water prawns

Fresh water prawns, Macrobrachium lamarrei and Macrobrachium dayanum (Crustacea-Decapoda) were subjected to static bioassay tests to ascertain the LC50 values of copper sulphate. The 24, 48, 72 and 96 hr LC50 values of copper sulphate for M. lamarrei were 0.38, 0.361, 0.343 and 0.300 mg/l and for M. dayanum were 1.634, 0.988, 0.532 and 0.418 mg/l respectively. Behavioral responses and LC50 values indicate that M. lamarrei were more sensitive to copper sulphate than M. dayanum.     

Recent advances in SO2, NOx, and O3 personal monitoring

Since the air pollution as measured by stationary monitoring stations is a poor indicator of the population exposure, personal monitors are indispensible to health effects studies. This article reviews the current research on the development of personal monitors. Although most of the analytical methods reviewed in this study appear to be sensitive to the levels of the target pollutants NO₂, SO₂, and O₃ generally encountered in indoor and outdoor air, they lack the desired performance characteristics for a personal monitoring device, such as user safety and ease of operation, weight, and maintenance. Electrochemical transducers/sensors, which have not yet been exploited, are attractive candidates for the application to personal monitoring. This technique has an added feature of generating real-time measurements. A few research models and commercially attractive devices that can be used in field studies are included.     

In vitro metabolism of deltamethrin by stem and leaf homogenates of tobacco plants

Stem and leaf homogenates from tobacco plants metabolised deltamethrin by oxidative and hydrolytic actions on the insecticide. Although a major portion of deltamethrin remained unchanged, metabolites such as 3-phenoxybenzaldehyde, 3-phenoxybenzoic acid and 3-(2,2-dibromonyl)-2,2-dimethylcyclopropanecarboxylic acid were formed. The data suggest a major portion of the insecticide would remain unchanged when absorbed by tobacco plants.     

Estimation and comparison of night-time OH levels in the UK urban atmosphere using two different analysis methods

Night-time OH levels have been determined for UK urban surface environments using two methods,the decay and steady state approximation methods.Measurement data from the UK National Environmental Technology Centre archive for four urban sites(Bristol,Harwell,London Eltham and Edinburgh) over the time period of 1996 to 2000 have been used in this study.Three reactive alkenes,namely isoprene,1,3-butadiene and trans-2-pentene were chosen for the calculation of OH levels by the decay method.Hourly measurements o...     

Nitrogen oxides emission control options for coal-fired electric utility boilers

Recent regulations have required reductions in emissions of nitrogen oxides (NOx) from electric utility boilers. To comply with these regulatory requirements, it is increasingly important to implement state-of-the-art NOx control technologies on coal-fired utility boilers. This paper reviews NOx control options for these boilers. It discusses the established commercial primary and secondary control technologies and examines what is being done to use them more effectively. Furthermore, the paper discusses recent developments in NOx controls. The popular primary control technologies in use in the United States are low-NOx burners and overfire air. Data reflect that average NOx reductions for specific primary controls have ranged from 35% to 63% from 1995 emissions levels. The secondary NOx control technologies applied on U.S. coal-fired utility boilers include reburning, selective noncatalytic reduction (SNCR), and selective catalytic reduction (SCR). Thirty-six U.S. coal-fired utility boilers have installed SNCR, and reported NOx reductions achieved at these applications ranged from 15% to 66%. Recently, SCR has been installed at >150 U.S. coal-fired utility boilers. Data on the performance of 20 SCR systems operating in the United States with low-NOx emissions reflect that in 2003, these units achieved NOx emission rates between 0.04 and 0.07 lb/10(6) Btu.