Bioaccumulation of metals in human blood in industrially contaminated area

The consumption of contaminated food crops, meat and milk has significantly increased the concentrations of trace metals in human blood as compared to the control area.     

In vitro metabolism of deltamethrin by stem and leaf homogenates of tobacco plants

Stem and leaf homogenates from tobacco plants metabolised deltamethrin by oxidative and hydrolytic actions on the insecticide. Although a major portion of deltamethrin remained unchanged, metabolites such as 3-phenoxybenzaldehyde, 3-phenoxybenzoic acid and 3-(2,2-dibromonyl)-2,2-dimethylcyclopropanecarboxylic acid were formed. The data suggest a major portion of the insecticide would remain unchanged when absorbed by tobacco plants.     

平寨水库荧光溶解性有机质的来源、特征及其动态转化

利用三维激发发射矩阵光谱(3-D EEM)和平行因子分析,研究了三岔河流域平寨水库溶解有机质的来源、组成和转化情况。在平寨水库的入库水、表层水(0～5 m)、深层水(10～60 m)和出库水中,检测到了几种荧光溶解有机质组分,分别为陆源类腐殖质、自源类腐殖质和浮游植物源的类蛋白质(或类色氨酸或类酪氨酸)。陆源类腐殖质的荧光强度在入库水中略高于出库水,表明陆源类腐殖质在水库系统中相对稳定,大坝截流对其影响不大。自源类腐殖质的荧光强度在库区明显高于入库水和出库水,表明自源类腐殖质既由自源有机物分解产生,又在光化学、微生物和大坝物理拦截过程的影响下发生分解;其他荧光组分中也检测到相似的结果。水温、pH、溶解氧和有色溶解有机质表现出相似的季节变化,光化学和微生物以及大坝拦截是引起水库入库水、库区表层水、库区深层水和出库水中荧光溶解有机质时空动态变化的主要原因。     

Flow injection online spectrophotometric determination of uranium after preconcentration on XAD-4 resin impregnated with nalidixic acid

In this work, spectrophotometer was used as a detector for the determination of uranium from water, biological, and ore samples with a flow injection system coupled with solid phase extraction. In order to promote the online preconcentration of uranium, a minicolumn packed with XAD-4 resin impregnated with nalidixic acid was utilized. The system operation was based on U(VI) ion retention at pH 6 in the minicolumn at flow rate of 15.2 mL min^?1. The uranium complex was removed from the resin by 0.1 mol dm^?3 HCl at flow rate of 3.2 mL min^?1 and was mixed with arsenazo III solution (0.05 % solution in 0.1 mol dm^?3 HCl, 3.2 mL min^?1) and driven to flow through cell of spectrophotometer where its absorbance was measured at 651 nm. The influence of chemical (pH and HCl (as eluent and reagent medium) concentration) and flow (sample and eluent flow rate and preconcentration time) parameters that could affect the performance of the system as well as the possible interferents was investigated. At the optimum conditions for 60 s preconcentration time (15.2 mL of sample volume), the method presented a detection limit of 1.1 μg L^?1, a relative standard deviation (RSD) of 0.8 % at 100 μg L^?1, enrichment factor of 30, and a sample throughput of 42 h^?1, whereas for 300 s of the preconcentration time (76 mL of sample volume), a detection limit of 0.22 μg L^?1, a RSD of 1.32 % at 10 μg L^?1, enrichment factor of 150, and a sampling frequency of 11 h^?1 were reported.     

In vitro release of bound (nonextractable) 14C residues from plants by corn leaves bomogenates

Corn leaves homogenates were found to release bound (nonextractable) ¹⁴C residues from the aerial portion of matured corn plants. The 22,000 g pellet and 10,000 g supernatant fractions were the most active in releasing the bound ¹⁴C residues. The released ¹⁴C residues comprised mainly 2-OH analogues of the $\text{N}$-monodealkylated analogues of atrazine. It is suggested that the enzymatic system in plants may cause metabolic conversion of bound residues.     

Revised fire consequence models for offshore quantitative risk assessment

Offshore oil and gas platforms are well known for their compact geometry, high degree of congestion, limited ventilation and difficult escape routes. A small mishap under such conditions can quickly escalate into a catastrophe. Among all the accidental process-related events occurring offshore, fire is the most frequently reported. It is, therefore, necessary to study the behavior of fires and quantity the hazards posed by them in order to complete a detailed quantitative risk assessment. While there are many consequence models available to predict fire hazards-varying from point source models to highly complex computational fluid dynamic models—only a few have been validated for the unique conditions found offshore.

In this paper, we have considered fire consequence modeling as a suite of sub-models such as individual fire models, radiation model, overpressure model, smoke and toxicity models and human impact models. This comprehensive suite of models was then revised by making the following modifications: (i) fire models: existing fire models have been reviewed and the ones most suitable for offshore conditions were selected; (ii) overpressure impact model: a model has been developed to quantify the overpressure effects from fires to investigate the possible damage from the hot combustion gases released in highly confined compartments; (iii) radiation model: instead of a point/area model, a multipoint grid-based model has been adopted for better modeling and analysis of radiation heat flux consequences. A comparison of the performance of the revised models with the ones used in a commercial software package for offshore risk assessment was also carried out and is discussed in the paper.     

Recovering from disasters: a study of livelihoods in post‐quake villages in northern Pakistan

The October 2005 earthquake in northern Pakistan severely affected the livelihoods of 1.5 million people. With the destruction of material assets and communications infrastructure, the quake had a devastating impact on people's way of life in this remote mountainous region. This paper explores livelihood revival interventions undertaken during the earthquake response, and considers how differentiated livelihood outcomes were achieved. In addressing this objective the paper examines livelihood rehabilitation schemes in terms of structural aspects, working strategies, key factors, strengths of interventions and the role of human agency in influencing livelihood trajectories of quake‐affected communities. Primary data for this study was gathered in northern Pakistan between October 2008 and January 2009. The study identifies structural shortcomings and strengths of the programmes attempting to revive the livelihoods of poor and vulnerable households. It identifies how households in two villages made the most of opportunities to improve their lives and move towards favourable outcomes.     

Elevated blood lead levels and cytogenetic markers in buccal epithelial cells of painters in India

Background, aim, and scope  

Lead, a major contaminant, is highly used in paint manufacturing due to its anticorrosive properties. Recent reports indicated high lead content among Indian paints used for commercial purposes. Painters are continuously exposed to these lead containing paints during painting of both commercial as well as residential buildings. Lead is well-known for its genotoxicty in occupational workers; however, in Indian painters the genotoxic effects of lead have not been reported to date. Therefore we aimed to study the genotoxic end points in painters due to their long-term exposure to these high lead-containing Indian paints.     

Effect of Urea on the Mechanical Properties of Gelatin Films Photocured with 2-Ethylhexyl Acrylate

Thin films of gelatin were prepared by casting. Then the films were photocured and the mechanical properties were studied. The tensile strength of UV cured gelatin films showed about 10% enhancement than that of raw gelatin films. Minor amount of urea (1–5%) was used as additive in aqueous gelatin solution and films were prepared using same technique. Four formulations were prepared in methanol with 2-ethylhexyl acrylate in the presence of photoinitiator (darocur-1664). The films were soaked in the prepared formulations and then cured under UV radiation at different intensities (5–25 passes). Percentage of urea, monomer concentration, soaking time and radiation intensities were optimized with the extent of polymer loading, TS and elongation at break of the photocured film. The films containing 2% urea, cured with 3% EHA for 3 min at 15th UV pass showed the highest mechanical properties. A significant improvement of TS (31%) occurred when EHA (3%) was incorporated.     

Effect of lead on the sorption of 2,4,6-trichlorophenol on soil and peat

The effect of lead on the sorption of 2,4,6-trichlorophenol (2,4,6-TCP) on soil and peat was investigated using a batch equilibration method. Lead markedly diminished the sorption of 2,4,6-TCP, and 2,4,6-TCP had little effect on lead sorption. Peat was a more effective adsorbent for 2,4,6-TCP than soil. The desorption hysteresis of 2,4,6-TCP verified the presence of high-energy sorption sites. Mechanisms of lead suppression effect on the 2,4,6-TCP sorption included the following: Firstly, lead accelerated the aggregation of colloids, the aggregates covered the surface in part and shrunk the pore sizes of the adsorbents, hence decreased the sorption of 2,4,6-TCP. Secondly, X-ray absorption and Fourier transform infrared spectroscopy study suggested that lead competed with 2,4,6-TCP for carboxylic, phenolic and Si-OH groups of organic matter and clay minerals. Such competition was partly responsible for the overall suppression effect of lead on the sorption of 2,4,6-TCP.