Tackling the issue of rural–urban water transfers in the Ta'iz region, Yemen

The Ta'iz region of Yemen is facing serious water problems. Total water use has become unsustainable. While agriculture places a heavy demand on the region's water resources, supplies for the fast growing city and the industrial sector are severely rationed despite their much higher willingness-to-pay for water relative to the returns on most agricultural uses. The article considers several decentralized management options for enhancing sustainability and improving intersectoral water allocation. These include, taxing groundwater extractions, taxing inputs used in pumping groundwater, and implementing a tradable water rights regime. The first two options could lead to resource conservation but are politically difficult to implement and may not necessarily result in better intersectoral water allocation. The tradable water rights regime has potential for achieving the twin objectives of resource conservation and improved intersectoral resource allocation. If farmers' de facto water rights were legitimized, this option would be more acceptable to them. However, the following additional conditions need to be met for making the option viable: (a) a set-aside allocation is made for lifeline supplies for the poor; ( b) the water law provides for separation of water rights from land rights; and (c) community organizations are involved as co-managers of the region's water resources.     

Enrichment and isolation of endosulfan-degrading microorganisms

Endosulfan (6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-hexahydro-6,9-methano-2,3,4-benzo-dioxathiepin-3-oxide) is a cyclodiene organochlorine currently used as an insecticide all over the world and its residues are posing a serious environmental threat. This study reports the isolation and identification of enriched microorganisms, capable of degrading endosulfan. Enrichment was achieved by using the insecticide as either the sole source of carbon or sulfur in parallel studies. Two strains each of fungi (F1 and F4) and bacteria (BF2 and B4) were selected using endosulfan as a sole carbon source. A Pandoraea species (Lin-3) previously isolated in our laboratory using lindane (gamma-HCH) as a carbon source was also screened for endosulfan degradation. F1 and F4 (Fusarium ventricosum) degraded alpha-endosulfan by as much as 82.2 and 91.1% and beta-endosulfan by 78.5 and 89.9%, respectively, within 15 d of incubation. Bacterial strains B4 and Lin-3 degraded alpha-endosulfan up to 79.6 and 81.8% and beta-endosulfan up to 83.9 and 86.8%, respectively, in 15 d. Among the bacterial strains isolated by providing endosulfan as a sulfur source, B4s and F4t degraded alpha-endosulfan by as much as 70.4 and 68.5% and beta-endosulfan by 70.4 and 70.8%, respectively, after 15 d. Degradation of the insecticide occurred concomitant with bacterial growth reaching an optical density (OD600) of 0.366 and 0.322 for B4 and Lin-3, respectively. High OD600 was also noted with the other bacterial strains utilizing endosulfan as a sulfur source. Fungal and bacterial strains significantly decreased the pH of the nutrient culture media while growing on endosulfan. The results of this study suggest that these novel strains are a valuable source of potent endosulfan-degrading enzymes for use in enzymatic bioremediation.     

Effect of Macroalgal Expansion and Marine Protected Areas on Coral Recovery Following a Climatic Disturbance

Disturbance plays an important role in structuring marine ecosystems, and there is a need to understand how conservation practices, such as the designation of Marine Protected Areas (MPAs), facilitate postdisturbance recovery. We evaluated the association of MPAs, herbivorous fish biomass, substrate type, postdisturbance coral cover, and change in macroalgal cover with coral recovery on the fringing reefs of the inner Seychelle islands, where coral mortality after a 1998 bleaching event was extensive. We visually estimated benthic cover and fish biomass at 9 sites in MPAs where fishing is banned and at 12 sites where fishing is permitted in 1994, 2005, 2008, and 2011. We used analysis of variance to examine spatial and temporal variations in coral cover and generalized additive models to identify relations between coral recovery and the aforementioned factors that may promote recovery. Coral recovery occurred on all substrate types, but it was highly variable among sites and times. Between 2005 and 2011 the increase in coral cover averaged 1%/year across 21 sites, and the maximum increase was 4%/year. However, mean coral cover across the study area (14%) remained at half of 1994 levels (28%). Sites within MPAs had faster rates of coral recovery than sites in fished areas only where cover of macroalgae was low and had not increased over time. In MPAs where macroalgae cover expanded since 1998 there was no recovery. Where coral was recovering on granite reefs there was a shift in relative prevalence of colony life‐form from branching to encrusting species. This simplification of reef structure may affect associated reef fauna even if predisturbance levels of coral cover are attained. Efecto de la Expansión de Macroalgas y Áreas Marinas Protegidas sobre la Recuperación de Coral Después de una Perturbación Climática     

An experimental investigation into micro ball end-milling of silicon

Silicon is a representative operational material for semiconductor and micro-electronics. In certain MEMS applications, it is required to fabricate three dimensional channels and complex pattern on silicon substrate. Such features are typically fabricated by photolithography and chemical etching. These processes have low productivity and have certain other limitations. Therefore, a viable switch-over from non-traditional fabrication processes to traditional machining is highly desired for improved productivity in high-mix low-volume production. However, machining of silicon by traditional process is extremely difficult due to its high brittleness. Even very small forces produced during machining can cause brittle fracture on silicon surface resulting in deteriorated surface quality. The fundamental principle in machining of a brittle material such as silicon is to achieve material removal through plastic deformation rather than crack propagation. This paper presents the experimental results of ductile-mode machining of silicon by micro ball end-milling. The workpiece surface was inclined to the rotational axes of the cutter to improve the surface finish. It was established experimentally that 15-μm deep, fracture-free slots can be machined on silicon wafer by micro ball end-milling if the feed rate is below a certain threshold. The influence of several machining parameters on the roughness of machined-surface was also investigated. Cubic boron nitride (CBN) is presented as much economical alternative tool-material to single-crystal diamond for machining silicon in ductile-mode.     

The global partnership for sustainable development

This paper examines whether foreign aid, together with other economic, social and environmental factors, contributes to sustainable development. It starts with an illustrative theoretical growth model where foreign aid promotes sustainable development by protecting the environment. Using factor analysis and newly developed estimation methods for a dynamic panel data model with endogenous regressors, the empirical section of the paper finds evidence that foreign aid has had a significantly positive influence on sustainable development in aid recipient countries. This effect is very likely to go through channels related to growth and resources as well as a technology channel with respect to energy intensity. This research has important implications for a post‐2015 development framework on international collective action with regard to a sustainable future.     

Kinetic,equilibrium and thermodynamic studies for the sorption of metribuzin from aqueous solution using banana peels,an agro-based biomass

Banana peels were employed for the removal of metribuzin from aqueous solution. Sorption in the batch mode was optimized regarding pH, contact time, sorbent dose, initial pesticide concentrations, and temperature. The sorption data were fitted to pseudo-first-order, pseudo-second-order, intraparticle diffusion, Elovich, and liquid film diffusion model, the pseudo-second-order exhibiting best fit (R² = 0.9803). Of the four most common sorption isotherm models (Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich), the data followed the Langmuir isotherm with highest correlation. The maximum adsorption capacity was found to be 167 mg g^?1. Gibbs free energy, enthalpy, and entropy showed that the sorption was exothermic and spontaneous.     

Estimation and inter-comparison of dust aerosols based on MODIS, MISR and AERONET retrievals over Asian desert regions

This study presents detailed analysis of spatiotemporal variations and trend of dust optical properties i.e., Aerosol Optical Depth(AOD) and Angstrom component over Asian desert regions using thirteen years of data(i.e., 2001–2013) retrieved from Aerosol Robotic Network(AERONET), Moderate Resolution Imaging Spectroradiometer(MODIS) and Multi-angle Imaging Spectroradiometer(MISR). These regions include Solar Village, Dunhuang and Dalangzadgad and are considered as origin of desert aerosols in Asia. Mann–Kendall trend test was used to show the trend of AOD. The relationship of AOD with weather parameters and general AOD trend over different wavelengths has also been shown. AOD's trend has been observed significant throughout the year in Solar Village, while in Dunhuang and Dalanzadgad the significant trend has been found only in peak period(March–June).Analysis show high values of AOD and low values of angstrom in Solar Village during peak period. In Chinese desert regions, high values of AOD have been found during peak period and low values in pre-peak period. Significant relationship has been observed between AOD and average temperature in Solar Village and Dalanzadgad whereas rainfall and wind speed showed no significant impact on AOD in all desert regions.     

Used lubricating oil recycling using hydrocarbon solvents

A solvent extraction process using new hydrocarbon solvents was employed to treat used lubricant oil. The solvents used were liquefied petroleum gas (LPG) condensate and stabilized condensate. A demulsifier was used to enhance the treatment process. The extraction process using stabilized condensate demonstrated characteristics that make it competitive with existing used oil treatment technologies. The process is able to reduce the asphaltene content of the treated lubricating oil to 0.106% (w/w), the ash content to 0.108%, and the carbon residue to 0.315% with very low levels of contaminant metals. The overall yield of oil is 79%. The treated used oil can be recycled as base lubricating oil. The major disadvantage of this work is the high temperature of solvent recovery. Experimental work and results are presented in detail.