Hydrocarbon-utilizing microorganisms naturally associated with sawdust

Sawdust, one of the materials used as sorbent for removing spilled oil from polluted environments was naturally colonized by hydrocarbon-utilizing fungi, 1 × 10⁵-2 × 10⁵ colony forming units (CFU) g⁻¹, depending on the hydrocarbon substrate. This sorbent was initially free of hydrocarbon-utilizing bacteria. Incubating wet sawdust at 30 °C resulted in gradually increasing the fungal counts to reach after 6 months between 5 × 10⁶ and 7 × 10⁶ CFU g⁻¹, and the appearance of hydrocarbon-utilizing bacteria in numbers between 8 × 10⁴ and 3 × 10⁵ cells g⁻¹. The fungi belonged to the genera Candida (32% of the total), Penicillium (21%), Aspergillus (15%), Rhizopus (12%), Cladosporium (9%), Mucor (7%) and Fusarium (4%). Based on their 16S rRNA gene sequences the bacteria were affiliated to Actinobacterium sp. (38%), Micrococcus luteus (30%), Rhodococcus erythropolis, (19%) and Rhodococcus opacus (13%). Individual pure fungal and bacterial isolates grew on a wide range of individual pure aliphatic (n-alkanes with chain lengths between C₉ and C₄₀) and aromatic (benzene, biphenyl, anthracene, naphthalene and phenanthrene) hydrocarbons as sole sources of carbon and energy. Quantitative determinations revealed that all fungal and bacterial isolates could consume considerable proportions of crude oil, phenanthrene (an aromatic hydrocarbon) and n-hexadecane (an aliphatic hydrocarbon) in batch cultures. It was concluded that when sawdust is used as a sorbent, the associated microorganisms probably contribute to the bioremediation of oil and hydrocarbon pollutants in the environment.     

Improvement of digestibility of sunflower and corn residues by some saprophytic fungi

The in vitro degradation of fiber from two agricultural residues (Helianthus annuus and Zea mays) was studied using four saprophytic fungi. The changes in cellulolytic enzyme and phosphatase activities, the C/N ratio, the dry weight, the crude fiber (CF) content, and the protein and fiber digestibility coefficients were investigated in solid-state culture during a 45-day period of biodegradation. The FPase activity of Phanerochaete chrysosporium and the endoglucanase activities of P. chrysosporium and Trichoderma reesei compared to those of the other fungi were significantly (P < 0.05) high on both crop resides. Both acid and alkaline phosphatases were produced in greater amounts by P. chrysosporium than by the other fungi. The organic carbon contents of both residues were reduced more by T. reesei than by the other fungi. The fiber digestibility coefficient of untreated corn residue was higher than that of sunflower residue, but after treatment with fungi, the sunflower fiber digestibility increased more than that of corn did. Although the CF contents of both residues were decreased more by P. chrysosporium than by T. reesei, the fiber digestibility coefficients of both residues were increased more by T. reesei than by P. chrysosporium. The treatment of both crop residues increased their protein digestibility coefficients significantly compared to the control. The protein digestibility coefficients of both residues were increased more by T. reesei and P. chrysosporium than by the other fungi. In all treatments, the protein digestibility coefficient of sunflower residue was higher than that of corn residue.     

Advanced oxidation treatment of physico-chemically pre-treated olive mill industry effluent

In this study, the applicability of physico-chemical methods was investigated for the pre-treatment of the olive mill effluents prior to the discharge into the common sewerage ending with a municipal wastewater treatment plant. The samples were taken from an olive oil industry operated as three-phase process located in Turkey. Various pre-treatment methods including acid craking, polyelectrolyte and lime additions were applied. Advanced oxidation study using Fenton's process was also investigated following pre-treatment by acid cracking and cationic polyelectrolyte. Acid cracking alone gave satisfactory treatment efficiencies and polyelectrolite additions to the acid-cracked samples enhanced treatment efficiency. Since a complete treatment plant is available at the end of the sewer system, results indicated that the effluents of the investigated industry could be discharged into the municipal sewerage in the case of total chemical oxygen demand (COD(tot)), suspended solid (SS) and volatile suspended solid (VSS) concentrations according to the Turkish Water Pollution Control Regulation after pre-treatment with 5 ppm anionic polyelectrolyte following acid cracking. The minimum COD(tot), SS and VSS removals were observed when raw wastewater was pre-treated with lime and the discharge standards to the municipal sewer system could not be met. Advanced oxidation with Fenton's process was applied after acid cracking and cationic polyelectrolyte treatment in order to investigate further reduction in chemical oxygen demand (COD) concentration for minimizing the influence of this industrial discharge on the existing municipal wastewater treatment plant. Results indicated that COD(tot) removal increased up to 89% from 74% after Fenton's oxidation for the acid cracked samples in which cationic polyelectrolite (10 ppm) was added.     

Assessment of elemental concentrations in the urban air (case study: Tehran city)

Tehran is one of the megacities of the world with a population of over eight million. Its air is highly polluted mainly due to the suspended particulate matters, which encompasses a wide spectrum of chemical elements. These elements based on their type, size, and impact on the life cycle have various environmental and heath risks. In this research, the neutron activation method is used to determine the concentration levels of Al, Ba, Fe, Mg, and V in the urban air. Thus, two districts of Tehran with different characteristics are selected. District 21 includes much of the industries located in Tehran metropolitan and is considered as an industrial area. In contrast, district 22 lacks any significant industrial activity. It is a newly established and expanding district adjacent to district 21 with a great deal of constructional activities. For the measurement of the suspended particulate matters in the air, the various sections of the aforesaid districts with industrial, residential, heavily congested traffic, residential/commercial, residential/heavily congested traffic, and residential/industrial classifications were identified. Subsequently, 24 sampling stations were selected. The sampling of the suspended particulate matters was conducted with the aid of a high volume pump containing 125 mm cellulose filters in two different time intervals. After completion of the sampling process, the samples were prepared and sent to the research reactor of the Iran Nuclear Energy Organization for Neutron Activation. During the next steps, the radiations emitted from the samples were registered, the radiation curves were plotted, and the amounts of the trace elements were determined. As a result, the average concentration levels of Al, Ba, Fe, Mg, and V were identified to be 3.301140, 2.273658 × 10, 4.0681696 × 10^???1, 3.5525475 × 10^???1, and 3.04075 × 10^???2 μg/m³, respectively. Moreover, the emission sources of the aforesaid elements into the air were identified. The concentration levels of these elements in the industrial and heavily congested traffic sections were higher. Finally, it was concluded that the statistical analysis of these elements presents a meaningful correlation among them.     

Indoor radon measurement and effective dose assessment of 150 apartments in Mashhad,Iran

Environmental monitoring and indoor radon measurement are important for public health, to estimate the cancer risk of respiratory system and, if necessary, to suggest proper methods that reduce indoor radon level. In this research, indoor radon concentration in the air has been measured in 150 apartments in Mashhad city. The result demonstrates about 94.7% of apartments have radon concentration less than 100 Bq/m³, taken by WHO as the action level, and 5.3% have the concentration higher than this level. As well as, annual radon dose has been assessed using the equation for annual effective dose calculation introduced by United Nations Scientific Committee on the Effects of Atomic Radiation.     

Hydrogeochemistry and water quality assessment of the Kor–Sivand Basin, Fars province, Iran

In order to assess the quality and suitability of waters in the Kor-Sivand river basin, 60 water samples from the Kor river and 90 water samples from wells in the basin were studied. Assessments were based on Piper's and Gibbs' diagrams for water quality, Food and Agricultural Organization's (FAO) guidelines, and US Salinity Laboratory diagram for water suitability. The results showed that the river water is of Ca-HCO(3) type, while well water is of Ca-Cl and Na-Cl type. Based on Gibbs' diagram, the source of soluble ions in the river water samples is the weathering of stones over which water flows, while evaporation was found to be the dominant process in the ion concentration of the well samples. According to the FAO Guidelines, the salinity of surface water for irrigation did not cause great restrictions; however, many of these waters could create potential permeability problems. In the groundwater samples, a high salt concentration is more important than the infiltration problem. Mg hazard values at some sites limit its use for agricultural purposes. One third of the river water samples and two thirds of well waters had more than 50% magnesium. Saturation indices showed that 94% of the analyzed water samples are supersaturated with calcite, aragonite, and dolomite. Based on the US Salinity Laboratory diagram, river water samples were classified as C(2)S(1) and C(3)S(1), while C(4)S(3), C(4)S(4), C(2)S(1), and C(3)S(1) were the most dominant classes in well samples. Some management practices necessary for sustainable development of water resources in the study area were discussed briefly, including appropriate selection of crops, adequate drainage, leaching, blending and cyclic use of saline water, proper irrigation method, and addition of soil amendment.     

Flow injection online spectrophotometric determination of uranium after preconcentration on XAD-4 resin impregnated with nalidixic acid

In this work, spectrophotometer was used as a detector for the determination of uranium from water, biological, and ore samples with a flow injection system coupled with solid phase extraction. In order to promote the online preconcentration of uranium, a minicolumn packed with XAD-4 resin impregnated with nalidixic acid was utilized. The system operation was based on U(VI) ion retention at pH 6 in the minicolumn at flow rate of 15.2 mL min^?1. The uranium complex was removed from the resin by 0.1 mol dm^?3 HCl at flow rate of 3.2 mL min^?1 and was mixed with arsenazo III solution (0.05 % solution in 0.1 mol dm^?3 HCl, 3.2 mL min^?1) and driven to flow through cell of spectrophotometer where its absorbance was measured at 651 nm. The influence of chemical (pH and HCl (as eluent and reagent medium) concentration) and flow (sample and eluent flow rate and preconcentration time) parameters that could affect the performance of the system as well as the possible interferents was investigated. At the optimum conditions for 60 s preconcentration time (15.2 mL of sample volume), the method presented a detection limit of 1.1 μg L^?1, a relative standard deviation (RSD) of 0.8 % at 100 μg L^?1, enrichment factor of 30, and a sample throughput of 42 h^?1, whereas for 300 s of the preconcentration time (76 mL of sample volume), a detection limit of 0.22 μg L^?1, a RSD of 1.32 % at 10 μg L^?1, enrichment factor of 150, and a sampling frequency of 11 h^?1 were reported.     

Spatial assessment of water quality parameters in Jhelum city (Pakistan)

In this study, we assess the drinking water quality of Jhelum city. Two hundred and ninety-two drinking water samples were randomly collected in the study area. These samples were chemically analyzed for three key toxic (in excess) elements such as pH, total dissolved solids (TDS), and calcium. Geostatistical techniques such as variogram and kriging were used to investigate the spatial variations of these minerals across the city. The spatial structure for each element was found to be anisotropic, and thus, anisotropic variograms were used. The kriging predictions revealed significant concentrations of the above-stated elements at some locations in the study area. While comparing with the World Health Organization, United States Environmental Protection Agency, and Pakistan Environmental Protection Agency standards, the water samples were found to be unsatisfactory for drinking. We conclude that the drinking water in this region is of poor quality and needs proper treatment to make it palatable.     

Monitoring and assessment of heavy metal/metalloid concentration by inductively coupled plasma mass spectroscopy (ICP-MS) method in Gonyeli Lake,Cyprus

The presence of heavy metals/metalloids in the ecosystem has been an increasing ecological and global public health concern due to their potential to cause adverse health effects. For this reason, the accumulation of some heavy metals such as Cr, Mn, Ni, Cu, As, Cd, Pb was assessed by way of ICP-MS in water, sediment and fish (Cyprinus carpio) sampled from Gonyeli Lake, North Cyprus. The results showed that these metals/metalloids are found widespread throughout the study area. In water, most concentrated element was manganese with 92.1 ppb and least concentrated was lead with 0.914 ppb. In sediment, copper had the highest concentration with 613 ppm, and cadmium the lowest with 1.57 ppm. In fish tissues (muscle and gills), the most concentrated element was manganese with 12.5 ppm and the least concentrated cadmium with 0.017 ppm. These results indicate that future remediation efforts are indispensable for the rehabilitation of the lake.     

Monitoring bacterial contamination of piped water supply in rural coastal Bangladesh

Safe drinking water is scarce in southwest coastal Bangladesh because of unavailability of fresh water. Given the high salinity of both groundwater and surface water in this area, harvested rainwater and rain-fed pond water became the main sources of drinking water. Both the government and non-government organizations have recently introduced pipe water supply in the rural coastal areas to ensure safe drinking water. We assessed the bacteriological quality of water at different points along the piped water distribution system (i.e., the source, treatment plant, household taps, street hydrants, and household storage containers) of Mongla municipality under Mongla Upazila in Bagerhat district. Water samples were collected at 2-month interval from May 2014 to March 2015. Median E. coli and total coliform counts at source, treatment plant, household taps, street hydrants, and household storage containers were respectively 225, 4, 7, 7, and 15 cfu/100 ml and 42,000, 545, 5000, 6150, and 18,800 cfu/100 ml. Concentrations of both of the indicator bacteria reduced after treatment, although it did not satisfy the WHO drinking water standards. However, re-contamination in distribution systems and household storage containers indicate improper maintenance of distribution system and lack of personal hygiene.