Dry deposition and soil-air gas exchange of polychlorinated biphenyls (PCBs) in an industrial area

Ambient air and dry deposition, and soil samples were collected at the Aliaga industrial site in Izmir, Turkey. Atmospheric total (particle + gas) ∑₄₁-PCB concentrations were higher in summer (3370 ± 1617 pg m⁻³, average + SD) than in winter (1164 ± 618 pg m⁻³), probably due to increased volatilization with temperature. Average particulate ∑₄₁-PCBs dry deposition fluxes were 349 ± 183 and 469 ± 328 ng m⁻² day⁻¹ in summer and winter, respectively. Overall average particulate deposition velocity was 5.5 ± 3.5 cm s⁻¹. The spatial distribution of ∑₄₁-PCB soil concentrations (n = 48) showed that the iron-steel plants, ship dismantling facilities, refinery and petrochemicals complex are the major sources in the area. Calculated air-soil exchange fluxes indicated that the contaminated soil is a secondary source to the atmosphere for lighter PCBs and as a sink for heavier ones. Comparable magnitude of gas exchange and dry particle deposition fluxes indicated that both mechanisms are equally important for PCB movement between air and soil in Aliaga.     

Assessment of imidacloprid toxicity on reproductive organ system of adult male rats

In the current study it was aimed to investigate the toxicity of low doses of imidacloprid (IMI) on the reproductive organ systems of adult male rats. The treatment groups received 0.5 (IMI-0.5), 2 (IMI-2) or 8 mg IMI/kg body weight by oral gavage (IMI-8) for three months. The deterioration in sperm motility in IMI-8 group and epidydimal sperm concentration in IMI-2 and IMI-8 groups and abnormality in sperm morphology in IMI-8 were significant. The levels of testosterone (T) and GSH decreased significantly in group IMI-8 compared to the control group. Upon treatment with IMI, apoptotic index increased significantly only in germ cells of the seminiferous tubules of IMI-8 group when compared to control. Fragmentation was striking in the seminal DNA from the IMI-8 group, but it was much less obvious in the IMI-2 one. IMI exposure resulted in elevation of all fatty acids analyzed, but the increases were significant only in stearic, oleic, linoleic and arachidonic acids. The ratios of 20:4/20:3 and 20:4/18:2 were decreased and 16:1n-9/16:0 ratio was increased. In conclusion, the present animal experiments revealed that the treatment with IMI at NOAEL dose-levels caused deterioration in sperm parameters, decreased T level, increased apoptosis of germ cells, seminal DNA fragmentation, the depletion of antioxidants and change in disturbance of fatty acid composition. All these changes indicate the suppression of testicular function.     

Simultaneous determination of organochlorine pesticides and bisphenol A in edible marine biota by GC-MS

A study to assess the level of organochlorine pesticides (OCPs) and bisphenol A (BPA) in edible marine biota collected from coastal waters of Malaysia was conducted using GC-MS and SPE extraction. An analytical method was developed and validated to measure the level of 15 OCPs and BPA simultaneously from five selected marine species. It was observed that some samples had low levels of p,p′-DDE, p,p′-DDT and p,p′- DDD ranging from 0.50 ng g⁻¹ to 22.49 ng g⁻¹ dry weight (d.w) but significantly elevated level of endosulfan I was detected in a stingray sample at 2880 ng g⁻¹ d.w. BPA was detected in 31 out of 57 samples with concentration ranging from below quantification level (LOQ: 3 ng g⁻¹) to 729 ng g⁻¹ d.w. The presence of OCPs is most likely from past use although there is also indication of illegal use in recent times. The study also reveals that BPA is more widely distributed in coastal species caught off the coast of the most developed state. The potential health risk from dietary intakes of OCPs and BPA from the analysed fish species was negligible.     

Sensitivity of the solution of the Elder problem to density, velocity and numerical perturbations

In this paper the Elder problem is studied with the purpose of evaluating the inherent instabilities associated with the numerical solution of this problem. Our focus is first on the question of the existence of a unique numerical solution for this problem, and second on the grid density and fluid density requirements necessary for a unique numerical solution. In particular we have investigated the instability issues associated with the numerical solution of the Elder problem from the following perspectives: (i) physical instability issues associated with density differences; (ii) sensitivity of the numerical solution to idealization irregularities; and, (iii) the importance of a precise velocity field calculation and the association of this process with the grid density levels that is necessary to solve the Elder problem accurately. In the study discussed here we have used a finite element Galerkin model we have developed for solving density-dependent flow and transport problems, which will be identified as TechFlow. In our study, the numerical results of Frolkovic and de Schepper [Frolkovic, P. and H. de Schepper, 2001. Numerical modeling of convection dominated transport coupled with density-driven flow in porous media, Adv. Water Resour., 24, 63-72.] were replicated using the grid density employed in their work. We were also successful in duplicating the same result with a less dense grid but with more computational effort based on a global velocity estimation process we have adopted. Our results indicate that the global velocity estimation approach recommended by Yeh [Yeh, G.-T., 1981. On the computation of Darcian velocity and mass balance in finite element modelling of groundwater flow, Water Resour. Res., 17(5), 1529-1534.] allows the use of less dense grids while obtaining the same accuracy that can be achieved with denser grids. We have also observed that the regularity of the elements in the discretization of the solution domain does make a difference in obtaining a unique stationary solution for this problem. The results of our study also indicate that the density differences are critical in the solution of the Elder problem and that high density differences lead to the physical instability that is inherent with this problem. Other than the physical instability associated with the level of density differences used in the Elder problem, the following two points should be considered in solving the Elder problem in a consistent manner: (i) strict attention should be paid to the vertical grid Peclet number in developing the criteria for convergent grid selection; and, (ii) with a globally continuous velocity calculation stable solutions can be obtained at lower grid densities.     

Analysis of Atmospheric Conditions during Air Pollution Episodes in Ankara,Turkey

ABSTRACT

This paper presents a detailed analysis of the meteorological conditions that are associated with strong air pollution episodes in Ankara, Turkey. Based on climatological and air quality data [SO₂ and TSP (total suspended par-ticulates)] obtained for the winter months during 19891994, the analysis showed that the presence of weak atmospheric pressure gradients and warm air advection were the most important factors leading to high SO₂ and TSP concentrations. In addition, the onset of the high air pollution episodes was generally associated with a trend toward negative vorticity at the 850-hPa level.     

Solid phase extraction of Cd,Pb, Ni,Cu, and Zn in environmental samples on multiwalled carbon nanotubes

A simple and sensitive solid phase extraction (SPE) method on multiwalled carbon nanotubes (MWCNTs) is presented for the determination of cadmium, lead, nickel, copper, and zinc at trace levels combined with flame atomic absorption spectrometry. The effects of parameters like pH, sample volume, sample and eluent flow rates, eluent concentration, and volume and type of eluent on the recovery of trace elements was examined. The metals retained on the nanotube at pH 6.5 as α-benzoin oxime complexes were eluted by 10 mL 2 M HNO₃ in acetone. The influence of matrix ions on the developed method was also evaluated. The preconcentration factor of the method was found to be 50. The detection limits for Cd(II), Pb(II), Ni(II), Cu(II), and Zn(II) were found as 1.7, 5.5, 6.0, 2.3, and 2.4 μg L^?1, respectively. To test the accuracy of the method, the method was applied to TMDA-70 fortified lake water and Spinach 1570A standard reference materials. Addition recovery studies were applied to tap water and cracked wheat samples, and determination of the analyte elements was carried out in some food samples with good results.     

Evaluating sustainable land use for the Değirmendere valley: A case study from northeastern Turkey

Regional land-use development projects are undertaken to protect water resources necessary for agriculture, energy and sustaining human life. The De?irmendere valley, in the province of Trabzon in the Black Sea region of Turkey, provides clean water to the city of Trabzon. The valley is part of the Silk Road from Asia to the Black Sea and contains historical monasteries such as Sumela, Kustul and Vazelon. However, over the years, misuse of the valley has caused freshwater, sea and environmental pollution. In an attempt to overcome these problems, a multilateral project, De?irmendere Vadisi Çevre Düzenlemesi (DEVAÇED), was launched in the region. This paper aims to provide information necessary for engineering projects within the region. Six villages, on both sides of the valley, were selected for this research and evaluated in terms of river basin utilization, topography, cadastral survey of property and ownership, and land readjustment improvements. The study found illegal and improper urbanization, including industrial facilities within the valley causing water pollution. Current cadastral base maps are not sufficiently accurate for engineering projects, and in some places buildings have been constructed on unstable soils that are susceptible to landslides. The research results have helped to generate important recommendations for rehabilitation of the river basin.     

Trace metal contents in chewing gums and candies marketed in Turkey

Cu, Ni, Pb, Fe, Mn, Cr and Cd contents were determined in 17 different brands of chewing gum and candy samples available in local markets of Kayseri, Turkey. Concentration of selected trace metals were estimated using flame atomic absorption spectrometer after dry and wet digestion methods. Out of 17 brands of chewing gums and candies analysed, four were cocoa based, two were sugar based and other were of fruit based. Copper level ranged from 0.219 to 2.455 microg/g with an average of 1.390 microg/g. Nickel ranged from 0.120 to 2.588 microg/g with an average of 0.846 microg/g. Lead level ranged from 0.031 to 2.46 microg/g with an average of 0.746 microg/g. Iron level ranged from 3.963 to 9.863 microg/g with an average of 6.618 microg/g. Manganese level ranged from 1.872 to 5.067 microg/g with an average of 3.196 microg/g. Chromium ranged from 0.740 to 6.265 microg/g with an average of 2.473 microg/g and cadmium level ranged from 0.027 to 0.825 microg/g with an average of 0.296 microg/g. Cocoa based samples were found to have higher contents of the analysed metals than sugar and fruit based samples.     

Synthesis and Extraction Study of Calix[4]arene Dinitrile Derivatives Incorporated in a Polymeric Backbone with Bisphenol-A

Two new copolymers containing pendant calix[4]arene units with nitrile functionalities at their lower rim have been synthesized via nucleophilic substitution reactions involving 5,11,17,23-tetra-tert-butyl-25,27-bis(cyanomethoxy)-26,28-dihydroxy-calix[4]arene (3) or 25,27-bis(cyanometh oxy)-26,28-dihydroxy-calix[4]arene (4) with 1,5-dibromopentane and bisphenol-A. The phase transfer studies were performed by using liquid–liquid extraction procedures. It has been deduced from the observations that both copolymers show a good phase transfer affinity toward selected alkali, alkaline earth, and transition metal cations, unlike their precursor (3).