Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard composites

This study investigated some of the important physical (thickness swelling) and mechanical (modulus of rupture, modulus of elasticity and internal bond) properties of single-layer particleboard panels made from eucalyptus (Eucalyptus camaldulensis Dehn.), waste of grass clippings (Lolium perenne L.) and combinations of the two. The chemical properties (pH, holocelluse and alpha cellulose contents, and water, alcohol-benzene and 1% sodium hydroxide solubilities) of the raw materials were also determined. Panels with a 6:94 ratio of grass-to-eucalyptus particles had the required mechanical properties for interior fitments including furniture and general uses. Boards manufactured with 100% grass clippings exhibited the lowest quality. The overall panel properties improved with a lower percentage of grass clippings added. Based on initial results, it also appears that grass should compose no more than 13% to achieve acceptable panel properties for interior fitments and general uses.     

The comparison of heavy metal accumulation ratios of some fish species in Enne Dame Lake (Kütahya/Turkey)

The metal accumulation levels for muscle, skin, gill, liver and intestine tissues of some Cyprinidae species (Carassius carassius, Condrostoma nasus, Leuciscus cephalus and Alburnus alburnus) in Enne Dame Lake (Kütahya/Turkey), which is mostly fed by hot spring waters, were investigated. Analyses were performed for copper (Cu), zinc (Zn), manganese (Mn), iron (Fe), cobalt (Co), magnesium (Mg), nickel (Ni), chrome (Cr) and boron (B) using inductively coupled plasma-optic emission spectroscopy (ICP-OES), and cadmium (Cd) using atomic absorption spectrophotometer (AAS) utilizing microwave digestion techniques. The concentrations of the heavy metals found in the fish varied in the follow ing ranges: Cu: < DL-7.04, Zn: 6.96-357.25, Mn: < DL-20.70, Ni: < DL-6.21, Fe: 9.62-2500.33, Cr: < DL-1.74, Co: < DL-0.54, Cd: 0.01-0.27 and Mg: 197.44-904.90 mg/kg wet weight. While B had the second highest concentration in the water of the lake, it was not encountered in any tissue of the investigated species. In all tissues and the species, While the bioaccumulation factors (BAFs) of Mn, Zn, Fe and Cu were remarkably high, the BAFs of Mg, Cr, Co, and B were also fairly low or none. Although the heavy metal accumulation levels for the muscle were generally lower than other tissues, there were some exceptions. Cd level in the muscle of C. carassius was higher than the permissible limit stated by Turkish legislation, FAO and WHO. The mean metal amounts for all the investigated tissues and species are statistically compared and discussed in this study.     

Assessment of trace metal concentrations in muscle tissue of certain commercially available fish species from Kayseri,Turkey

Regular consumption of fish has been widely recommended by health authorities. However, it is known that some species accumulate high levels of contaminants including heavy metals (e.g., Hg, Cd, Pb, and As). In this study, Cu, Pb, Co, Ni, Cr, Mn, Cd, and Fe were determined in the muscle tissue of 11 commercially available fish species (Sparus auratus, Dicentrarchus labrax, Mullus barbatus, Belone belone, Psetta maxima, Epinephelus aeneus, Salmothymus, Soleidae, Pomatomus saltatrix, Engraulis encrasicolus, and Sarda sarda) supplied from retailers in Kayseri, Turkey. Determinations were carried out by flame atomic absorption spectrometry after the wet digestion method. The average metal concentrations of the 11 species were determined in the range of 0.54–1.79, 0.82–1.40, 2.38–4.54, 1.23–3.67, 5.01–5.97, 0.77–3.59, 0.48–1.06, and 5.05–122.8 μg/g wet weight for Cu, Pb, Co, Ni, Cr, Mn, Cd, and Fe, respectively. The permissible tolerable daily intake (PTDI) and calculated daily intake (CDI) values were compared, and the calculated daily intake values of the samples were found to be below the established values. Correlations between the metal contents in samples were investigated by performing correlation tests with SPSS 13.0 for windows.     

Determination of Au(III) and Pd(II) ions by flame atomic absorption spectrometry in some environmental samples after solid phase extraction

A simple and sensitive solid phase extraction method was developed for simultaneous separation and preconcentration of gold and palladium ions with N-(4-methylphenyl)-2-{[(4-phenyl-5-pyridine-4-yl-4H-1,2,4-triazol-3-yl)thio]acetyl}hydrazine carbo thioamide complex on Amberlite XAD-1180 resin before their determination by flame atomic absorption spectrometry. Some analytical parameters such as HNO₃ concentration of the sample solution, amount of complexing agent, sample volume, eluent type and volume, effects of foreign ions and adsorption capacity of the resin were investigated for quantitative recovery of gold and palladium ions. The effects of some anions and cations were also examined. Under optimum conditions, the detection limits for gold and palladium ions were found to be 0.29 and 0.19 μg L^?1, respectively. The preconcentration factor for gold and palladium was 250. After being validated by standard addition and analysis of standard reference material, the procedure was successfully applied to the analysis of sea and stream water, anodic slime, gold ore, soil and electronic waste.     

Source Type Evaluation of Polycyclic Aromatic Hydrocarbons (PAHs) in Surface Sediments from the Muar River and Pulau Merambong,Peninsular Malaysia

This article is the most recent report of polycyclic aromatic hydrocarbons (PAHs) in the Muar River and Pulau Merambong, Peninsular Malaysia. A total of 16 priority pollutant PAHs in addition to methylphenanthrene among alkylated PAHs were analyzed in surface sediments during May 2013. Total PAHs ranged from 212 to 440 and 151 to 412 ng g^?1 dw in sediments from the Muar River and the Pulau Merambong, respectively. The Muar River showed an increasing trend of PAH concentrations, while no previous data exist for the Pulau Merambong. Generally, mixed petrogenic and pyrogenic sources of PAHs with predominance of the latter were detected in the study area. Effective management of oil pollution has caused a drastic decrease in petrogenic sources of PAHs.     

Impacts of climatic disasters in coastal Bangladesh: why does private adaptive capacity differ?

This paper quantitatively assesses the influences of various demographic and socio-economic factors, past adaptive behavioral factors, access to weather/climate information, and spatial/locational factors on coastal populations’ perceived adaptive capacity against major impacts of hydro-meteorological disasters on their livelihood. A total of 285 respondents from three coastal villages in Bangladesh were randomly interviewed between January and April 2009. Respondents rated their perceived adaptive capacity against 25 anticipated impacts of sea-level rise (SLR)-induced events on their livelihood. By employing the principal component analysis (PCA), perceived adaptive capacity was grouped into five major categories. Then, an adaptive capacity index for each of five major impacts, namely, “infrastructure damage and disrupted mobility,” “food and nutritional insecurity,” “low earning and higher cost of maintenance,” “loss of employment in offshore activities,” and “crisis of potable water and public health risk,” was prepared. How adaptive capacity against each of these major five categories of impacts differs due to the influence of various factors was assessed by employing the multivariate analysis of variance (MANOVA) technique. The MANOVAs show that age, sex, level of education, type of occupation, farmland holdings, past adaptive behavior against rainfall, salinity intrusion, freshwater crises, use of radio for weather information, and the distance of the homestead from the shoreline have varying levels of influence on respondents’ perceived adaptive capacity against each of the five major categories of impacts. Others factors have moderate to limited influences. The policy implication is that specific programs, rather than a generic one-size fits all program, must be initiated for enhancement of adaptive capacity against specific impacts.     

EXPOSURE ASSESSMENT OF POPULATIONS USING ENVIRONMENTAL MODELING,DEMOGRAPHIC ANALYSIS,AND GIS1

ABSTRACT: Simulation of ground-water flow and fate of contaminants in the subsurface environment constitutes a major phase of most environmental assessment and site remediation studies. These simulation studies yield information on spatial and temporal distributions of contaminants in the subsurface media. An important use of this information is to conduct exposure assessment studies. Spatial and temporal distributions of both chemical concentrations and exposed populations render this integrated exposure analysis task rather difficult. Geographic Information Systems (GIS), on the other hand, provide a platform in which layered, spatially distributed databases can be manipulated with ease, thereby simplifying exposure analysis tasks significantly. In this paper, we describe procedures that combine the simulation models and demographic databases under a GIS platform to automate the exposure assessment phase of a typical health assessment study. Procedures developed herein significantly simplify the post-processing phase of the analysis, and render the overall task more ‘user friendly.’ A site-specific application is included as a demonstration of the proposed process.