Factors influencing natural occurrence of fluoride-rich groundwaters: a case study in the southeastern part of the Korean Peninsula

Factors regulating the occurrence of fluoride in groundwater were investigated using natural isotope tracers and geochemical data in the southeastern part of Korea where about 10% of the total public water-supply wells (n=422) inspected in this study had fluoride levels exceeding the drinking water limit of Korea (1.5 mg/l). The F-rich public wells are mostly distributed along the major faults, especially in the terrain of the F-rich granitic rocks. The stable isotope analysis results provide substantial information for the relative ages of groundwaters. It is revealed that the F-rich groundwaters are deeply circulating paleogroundwaters and occur along the faults due to upward flow along the fault plane. While reacting with granitic rocks for a prolonged period, the F concentrations of groundwater are continuously enriched even after the groundwater reaches an equilibrium state with respect to fluorite (CaF2) due to removal of Ca by precipitation of calcite (CaCO3). These observations reflect that rock chemistry, groundwater age, well depth, and geologic structure are the important factors controlling the occurrence of high F groundwaters. However, high F groundwaters are rarely observed in the fault zones where the associated fractures are widely developed. Isotopic signature provides an evidence for deep penetration of recently recharged groundwater into the wide fault zone, indicating that the hydrologic condition of the fault is also an important factor controlling the occurrence of high F groundwaters.     

Global pollution monitoring of butyltin compounds using skipjack tuna as a bioindicator

Butyltin compounds (BTs) including mono- (MBT), di- (DBT), tri-butyltin (TBT) and total tin (sigmaSn), were determined in the liver of skipjack tuna (Katsuwonus pelamis) collected from Asian offshore waters (off-Japan, the Japan Sea, off-Taiwan, the East China Sea, the South China Sea, off-Philippines, off-Indonesia, the Bay of Bengal), off-Seychelles, off-Brazil and open seas (the North Pacific). BTs were detected in all the skipjack tuna collected, suggesting widespread contamination of BTs even in offshore waters and open seas on a global scale. Considering specific accumulation, Sex-, body length- differences and migration of skipjack tuna did not seem to affect BT concentrations, indicating rapid reflection of the pollution levels in seawater where and when they were collected. Skipjack tuna is a suitable bioindicator for monitoring the global distribution of BTs in offshore waters and open seas. High concentrations of BTs were observed in skipjack tuna from offshore waters around Japan, a highly developed and industrialized region (up to 400 ng/g wet weight). Moreover skipjack tuna collected from offshore waters around Asian developing countries also revealed the levels comparable to those in Japan (up to 270 ng/g wet weight) which may be due to the recent improvement in economic status in Asian developing countries. High percentages (almost 90%) of BTs in total tin (sigmaSn: sum of inorganic tin+organic tin) were found in the liver of skipjack tuna from offshore waters around Asian developing countries. This finding suggests that the anthropogenic BTs represent the major source of Sn accumulation in skipjack tuna from these regions.     

Reactive Compatibilization of Biobased Polyurethane Prepolymer Toughening Polylactide Prepared by Melt Blending

Polylactide (PLA) is a major biodegradable polymer, which has received extensive interests over the past decades and holds great potential to replace several petroleum-based polymeric materials. Nevertheless, the inherent brittleness and low impact strength have restricted its invasion to niche markets. In this paper, the authors demonstrate that the entirely bio-sourced blends, namely PLA and castor oil-based polyurethane prepolymer (COPUP), were first melt-compounded in an effort to prepare novel biodegradable materials with an excellent balance of properties. NCO-terminated COPUP was successfully synthesized and subsequently mixed with variable concentration of PLA matrix using melt-compounded by twin-screw extrusion technique. The miscibility, phase morphology, mechanical properties, and thermal resistance of the blends were investigated. During FTIR analysis, it suggests that the interfacial compatibilization between COPUP and PLA phase occurred by the reaction of –NCO group of MDI with terminal hydroxyl group of PLA. DMA analysis showed that COPUP and PLA showed some limited miscibility with shifted glass transition temperature. The morphologies of fracture surface showed a brittle-to-ductile transition owing by the addition of COPUP. The crystallization behavior was studied by differential scanning calorimeter (DSC). The strain at break and notched impact strength of PLA/COPUP blends were increased more than 112–15.4 times elegant of neat PLA; the increase is superior to previous toughening effect by using petroleum-based tougheners. Furthermore, the thermal resistances and melt flow properties of the materials were also examined by analysis of the melt flow index and heat deflection temperature use in the work. With enhanced toughness, the PLA/COPUP blends could be used as replacements for some traditional petroleum-based polymeric materials.     

Recovery of uranium phosphate by a stepwise thermal treatment of uranium-bearing spent TBP

A stepwise thermal treatment process for the recovery of uranium phosphate from uranium-dissolved spent TBP was demonstrated. The pathway of the reactions involved in the thermal decomposition and oxidation processes of uranium-bearing spent TBP was established based on the results of thermogravimetric analyses. Relatively low-temperature pyrolysis is required to avoid the condensation of corrosive phosphoric acid via vaporization. Low-temperature pyrolysis residue was analyzed and found to be composed of pyrocarbon, phosphorus oxide (P₂O₅) and two types of uranium phosphate (UP₂O₇ and UP₄O₁₂). Uranium pyrophosphate (UP₂O₇) was recovered from the burning out of pyrocarbon in the pyrolysis residue after the dissolution removal of phosphorus oxide in water. A substantial recovery of uranium by the proposed stepwise thermal treatment method was successfully demonstrated by a treatment of pyrolysis residue from a bench-scale low-temperature pyrolysis process.     

Risk management for outsourcing biomedical waste disposal – Using the failure mode and effects analysis

Using the failure mode and effects analysis, this study examined biomedical waste companies through risk assessment. Moreover, it evaluated the supervisors of biomedical waste units in hospitals, and factors relating to the outsourcing risk assessment of biomedical waste in hospitals by referring to waste disposal acts. An expert questionnaire survey was conducted on the personnel involved in waste disposal units in hospitals, in order to identify important factors relating to the outsourcing risk of biomedical waste in hospitals. This study calculated the risk priority number (RPN) and selected items with an RPN value higher than 80 for improvement. These items included “availability of freezing devices”, “availability of containers for sharp items”, “disposal frequency”, “disposal volume”, “disposal method”, “vehicles meeting the regulations”, and “declaration of three lists”. This study also aimed to identify important selection factors of biomedical waste disposal companies by hospitals in terms of risk. These findings can serve as references for hospitals in the selection of outsourcing companies for biomedical waste disposal.     

Differential enhanced degradation of cis‐ and trans‐1,3‐D in soil with a history of repeated field applications of 1,3‐D

Abstract

The fumigant 1,3‐dichloropropene (1,3‐D) is considered to be a potential alternative to methyl bromide. The degradation rates of cis‐ and trans‐l,3‐D in soil from a treated site during three successive annual applications of 1,3‐D progressively increased with an increase in the number of annual applications. The enhancement was greater for trans‐l,3‐D degradation than cis‐l,3‐D. In untreated soil, the degradation rates of the two isomers were similar. The enhancement lasted slightly longer than 2 years after annual field application of 1,3‐D had ceased. A single field reapplication of 1,3‐D to the treated site that had not been treated for 2 years resulted in resumed differential enhanced degradation of cis‐ and trans‐l,3‐D. Microorganisms were responsible for the enhanced degradation.     

Incorporating differences between genetic diversity of trees and herbaceous plants in conservation strategies

Reviews that summarize the genetic diversity of plant species in relation to their life history and ecological traits show that forest trees have more genetic diversity at population and species levels than annuals or herbaceous perennials. In addition, among-population genetic differentiation is significantly lower in trees than in most herbaceous perennials and annuals. Possible reasons for these differences between trees and herbaceous perennials and annuals have not been discussed critically. Several traits, such as high rates of outcrossing, long-distance pollen and seed dispersal, large effective population sizes (N_e), arborescent stature, low population density, longevity, overlapping generations, and occurrence in late successional communities, may make trees less sensitive to genetic bottlenecks and more resistant to habitat fragmentation or climate change. We recommend that guidelines for genetic conservation strategies be designed differently for tree species versus other types of plant species. Because most tree species fit an LH scenario (low [L] genetic differentiation and high [H] genetic diversity), tree seeds could be sourced from a few populations distributed across the species’ range. For the in situ conservation of trees, translocation is a viable option to increase N_e. In contrast, rare herbaceous understory species are frequently HL (high differentiation and low diversity) species. Under the HL scenario, seeds should be taken from many populations with high genetic diversity. In situ conservation efforts for herbaceous plants should focus on protecting habitats because the typically small populations of these species are vulnerable to the loss of genetic diversity. The robust allozyme genetic diversity databases could be used to develop conservation strategies for species lacking genetic information. As a case study of reforestation with several tree species in denuded areas on the Korean Peninsula, we recommend the selection of local genotypes as suitable sources to prevent adverse effects and to insure the successful restoration in the long term.     

Biological elimination of H2S and NH3 from wastegases by biofilter packed with immobilized heterotrophic bacteria

Biotreatment of various ratios of H₂S and NH₃ gas mixtures was studied using the biofilters, packed with co-immobilized cells (Arthrobacter oxydans CH8 for NH₃ and Pseudomonas putida CH11 for H₂S). Extensive tests to determine removal characteristics, removal efficiency, removal kinetics, and pressure drops of the biofilters were performed. To estimate the largest allowable inlet concentration, a prediction model was also employed. Greater than 95% and 90% removal efficiencies were observed for NH₃ and H₂S, respectively, irrespective of the ratios of H₂S and NH₃ gas mixtures. The results showed that H₂S removal of the biofilter was significantly affected by high inlet concentrations of H₂S and NH₃. As high H₂S concentration was an inhibitory substrate for the growth of heterotrophic sulfur-oxidizing bacteria, the activity of H₂S oxidation was thus inhibited. In the case of high NH₃ concentration, the poor H₂S removal efficiency might be attributed to the acidification of the biofilter. The phenomenon was caused by acidic metabolite accumulation of NH₃. Through kinetic analysis, the presence of NH₃ did not hinder the NH₃ removal, but a high H₂S concentration would result in low removal efficiency. Conversely, H₂S of adequate concentrations would favor the removal of incoming NH₃. The results also indicated that maximum inlet concentrations (model-estimated) agreed well with the experimental values for space velocities of 50–150 h⁻¹. Hence, the results would be used as the guideline for the design and operation of biofilters.     

Processes in informal end-processing of e-waste generated from personal computers in Vietnam

Informal treatment of e-waste plays an important role in many countries which have no or weak formal waste management structures. One of the challenges for assessing informal e-waste recycling technologies is to identify their disadvantages and potential technology improvement. The analysis of informal recycling processes starts with a balance of input and output materials for each of the processes. Main obstacles are the fact that in most cases, mixed or variety materials serve as input and, secondly by nature, the informal sector does not systematically measure and monitor the process. This study presents the processes and available data for informal e-waste recycling of desktop personal computer as it consists of components made of plastic and many metals within the Vietnamese context. To identify the most relevant processes, critical flows and technology gap, two scenarios are compared: (1) current situation in which recycling activities are taken in recycling craft villages and (2) appropriately selected BAT. The selected materials from e-waste cover a wide range of recycling processes and technologies: Printed Circuit Board treatment, metal (ferrous metal, aluminum and copper) and plastic recycling.

     

Friction measurements on “anti-slip” floors under shoe sole,contamination, and inclination conditions

Friction measurements were conducted to study the effects of shoe sole, floor, contamination, and inclined angle of the floor surface on friction coefficient. The shoe sole samples included composite rubber outsole samples with and without V-shaped tread design. Unglazed ceramic tiles of both flat and tiles with molded profile design were tested. The contamination conditions included dry, wet, and glycerol-contaminated conditions. The inclined angles included 0°, 5°, and 10°. A Brungraber Mark II slipmeter was used. The results showed that all the four factors affected friction coefficient significantly (p < 0.0001). Flat rubber soles had higher friction coefficients than the soling samples with V-shaped tread design on all tested floors and inclined angles under wet conditions. Flat soles, however, had extremely low friction when tested on flat floors under glycerol-contaminated conditions. The floors with molded grooves perpendicular to friction measurement direction had the highest friction coefficients than all other floor conditions under both the wet and glycerol-contaminated conditions except the wet/flat sole/10° condition. A regression model with a cosine function was established to describe the relationship between friction coefficient and inclined angle of the floor under the experimental conditions. This model is statistically significant at p < 0.0001 with an R² of 0.97.