Modeling linkages between sediment resuspension and water quality in a shallow,eutrophic, wind-exposed lake

The interactions between bed sediments and the water column in shallow, eutrophic lakes have tremendous implications for the fate and transport of nutrients in those water bodies. This has resulted in the development of water quality models for lakes incorporating the processes of sediment resuspension. Reliable resuspension models are thus needed to accurately represent this phenomenon. In this paper, three different sediment-resuspension models are combined with a hydrodynamic and water quality model, dynamic lake model-water quality (DLM-WQ), and the resulting models are used to simulate nutrient distributions in the highly eutrophic Salton Sea, California, USA. One of the resuspension formulas is based upon sediment characteristics as well as the bed shear stress exerted by wind-induced waves and currents, while the other two are standard, power-law-type formulas for cohesive sediments with two different exponents. The outputs for water quality variables, such as temperature, chlorophyll a, dissolved oxygen and nutrients, obtained from the three resulting models and from an earlier DLM-WQ run with a simple empirical sediment-resuspension model are compared with measured data. The level of agreement between the simulations and the measured data is assessed by using both statistical and graphical model evaluation methods, including measures of residual errors, sample autocorrelations, t-tests, and box plots. Based on these assessments, DLM-WQ with an extended version of the García and Parker [García, M.H., Parker, G., 1993. Experiments on the entrainment of sediment into suspension by a dense bottom current. J. Geophys. Res.-Oceans 98, 4793–4807] relationship gave the best results for water quality in the Salton Sea, confirming that the use of formulas with more information on the sediment characteristics yields more accurate results. To the best of our knowledge, this is the first effort to combine water quality models for lakes and reservoirs with a sediment-resuspension model which was originally intended for open-channel flows. The simulations confirm that sediment resuspension is the most dominant process in the Salton Sea's nutrient cycling. The effect of proposed physical changes to the Salton Sea on water quality characteristics is also addressed.     

Efficacy of vermicomposting for recycling organic portion of hospital wastes using <Emphasis Type="Italic">Eisenia fetida</Emphasis>: standardization of cow manure proportion to increase enzymatic activities and fungal biomass

Hospital wastes are infectious wastes generated in hospitals and need to be disposed in such a way that they do not spread disease. In this experiment, 5, 10, 15 and 20% cow manure (CM) were mixed with hospital wastes (HW), and mixed wastes were subjected to vermicomposting. In control treatment, only HW was used for vermicomposting. Results suggested that significantly (P ≤ 0.05) higher total nitrogen content was recorded in vermicomposts when 10% or more CM was added to HW. Higher mineralization rate (decrease in C/N ratio) and cellulase activity is probably responsible for rapid organic matter decomposition (loss of total organic carbon). Ergosterol content i.e., total fungal biomass and cellulolytic fungal population were almost constant initially, but increased in the latter stage of vermicomposting. All the vermicompost samples, prepared in this experiment, showed the absence of coliform bacteria. Therefore, it could be concluded that 10% CM addition with HW was the most economical to obtain best quality vermicompost in terms of nutrient content and microbial status.     

Removal of organic matter and nitrogen from river water in a model floodplain

A significant improvement in river water quality cannot be expected unless nonpoint-source contaminants are treated in addition to the further treatment of point-source contaminants. If river water is sprayed over a floodplain, the consequent water filtration through the sediment profile can simultaneously remove organic matter and nitrogen in the water through aerobic and denitrifying reactions. This hypothesis was tested using lysimeters constructed from polyvinyl chloride (PVC) pipe (150 cm long, 15 cm in diameter) packed with loamy sand floodplain sediment. Water was applied to the top of the lysimeters at three different flow rates (48, 54, and 68 mm d(-1)). Concentrations of NO3 and dissolved oxygen (DO), chemical oxygen demand (COD), and redox potential (Eh) in the water were measured as functions of depth after the system reached steady states for both water flow and reactions. At the rate of 68.0 mm d(-1), a reducing condition for denitrification developed below the 5-cm depth due to the depletion of O2 by organic matter degradation in the surface oxidizing layer; Eh and DO were below 205 mV and 0.4 mg L(-1), respectively. At a depth of 70 cm, COD and NO3-N concentration decreased to 5.2 and 3.8 mg L(-1) from the respective influent concentrations of 17.1 and 6.2 mg L(-1). Most biodegradable organic matter was removed during flow and further removal of NO3 was limited by the lack of an electron donor (i.e., organic matter). These results indicate that the floodplain filtration technique has great promise for treatment of contaminated river water.     

Does the selection of ISO 14001 registrars matter? Registrar reputation and environmental policy statements in China

This study investigates the relationship between characteristics of environmental policy statements and the reputations of ISO 14001 registrars who had performed certification audits of firms operating in mainland China. Three characteristics of environmental policy statements were examined: (1) The conformance of the policy to strict interpretations of the international standard; (2) The policy statement's adherence to the good practice guidelines specified in ISO 14004; and, (3) Self-reported evaluations of the policy statement's effectiveness as implemented. Data from 106 facilities in Beijing, Shanghai and Guangzhou reveal that registrar quality has a relatively weak, positive relationship with conformance to both ISO 14001 standards and to ISO 14004 guidelines, but no relationship was observed with the self-reported data. Additional findings are that the use of foreign registrars is significantly associated with the adoption of ISO 14004 guidelines and that conformance with ISO 14001 standards is somewhat higher for international joint ventures and foreign-owned firms than for state-owned enterprises.     

Operational characteristics of effective removal of H2S and NH3 waste gases by activated carbon biofilter

Simultaneous removal of hydrogen sulfide (H2S) and ammonia (NH3) gases from gaseous streams was studied in a biofilter packed with granule activated carbon. Extensive studies, including the effects of carbon (C) source on the growth of inoculated microorganisms and gas removal efficiency, product analysis, bioaerosol emission, pressure drop, and cost evaluation, were conducted. The results indicated that molasses was a potential C source for inoculated cell growth that resulted in removal efficiencies of 99.5% for H2S and 99.2% for NH3. Microbial community observation by scanning electron microscopy indicated that granule activated carbon was an excellent support for microorganism attachment for long-term waste gas treatment. No disintegration or breakdown of biofilm was found when the system was operated for 140 days. The low bioaerosol concentration emitted from the biofilter showed that the system effectively avoided the environmental risk of bioaerosol emission. Also, the system is suitable to apply in the field because of its low pressure drop and treatment cost. Because NH3 gas was mainly converted to organic nitrogen, and H2S gas was converted to elemental sulfur, no acidification or alkalinity phenomena were found because of the metabolite products. Thus, the results of this study demonstrate that the biofilter is a feasible bioreactor in the removal of waste gases.     

EPR characterization of the catalytic activity of clays for PCE removal by gamma-radiation induced by acid and thermal treatments

Clays from tidal flat sediments showed efficient catalytic activity in the decomposition of PCE by gamma-radiation. The highest PCE removal of 98.6% was obtained with clays heated to 700 degrees C after acid treatment. The improved catalytic activity was identified by electron paramagnetic resonance (EPR) spectroscopy. The EPR spectra of clays were significantly changed by the acid and thermal treatments. The intensity of a narrow signal at g=2 (signal III) was decreased with increasing thermal treatment temperature and this increased the PCE removal efficiency. The acid treatment completely removed a broad signal at g=2 (signal II), decreased the intensity of signal III, and improved the gamma-radiation treatment of PCE.     

A two-dimensional model for simulating the transport and fate of toxic chemicals in a stratified reservoir

A two-dimensional reservoir toxics model is essential to establishing effective water resources management and protection. In a reservoir, the fate of a toxic chemical is closely connected with flow regimes and circulation patterns. To better understand the kinetic processes and persistence and predict the dissipation of toxic contaminants in the reservoir during a spill or storm runoff event, a toxics submodel was developed and incorporated into an existing laterally integrated hydrodynamics and transport model. The toxics submodel describes the physical, chemical, and biological processes and predicts unsteady vertical and longitudinal distributions of a toxic chemical. The two-dimensional toxicant simulation model was applied to Shasta Reservoir in California to simulate the physico-chemical processes and fate of a volatile toxic compound, methyl isothiocyanate (MITC), during a chemical spill into the Sacramento River in 1991. The predicted MITC concentrations were compared with those observed. The effect of reservoir flow regimes on the transport and fate of the toxic substance was investigated. The results suggested that the persistence of MITC is significantly influenced by different flow regimes. Methyl isothiocyanate is more persistent in the reservoir under an interflow condition due to reduced volatilization from deep layers than under an overflow condition. In the overflow situation, the plume moved more slowly toward the dam and experienced greater dissipation. This analysis can assist in toxic spill control and reservoir management, including field sampling and closure of water intakes.     

Selective leaching of valuable metals from waste printed circuit boards

This study was carried out to recover valuable metals from the printed circuit boards (PCBs) of waste computers. PCB samples were crushed to smaller than 1 mm by a shredder and initially separated into 30% conducting and 70% nonconducting materials by an electrostatic separator. The conducting materials, which contained the valuable metals, were then used as the feed material for magnetic separation, where it was found that 42% of the conducting materials were magnetic and 58% were nonmagnetic. Leaching of the nonmagnetic component using 2 M H2SO4 and 0.2 M H2O2 at 85 degrees C for 12 hr resulted in greater than 95% extraction of Cu, Fe, Zn, Ni, and Al. Au and Ag were extracted at 40 degrees C with a leaching solution of 0.2 M (NH4)2S2O3, 0.02 M CuSO4, and 0.4 M NH4OH, which resulted in recovery of more than 95% of the Au within 48 hr and 100% of the Ag within 24 hr. The residues were next reacted with a 2 M NaCl solution to leach out Pb, which took place within 2 hr at room temperature.     

Toxicity of carbaryl,diquat dibromide,and fluoranthene,individually and in mixture,to larval grass shrimp,Palaemonetes pugio

This study examined the toxicity of two pesticides (carbaryl and diquat dibromide) and one polycyclic aromatic hydrocarbon (fluoranthene), both singly and in mixture, to grass shrimp larvae (Palaemonetes pugio). These three chemicals are all present in coastal environments and can easily enter estuarine ecosystems. Fluoranthene was the most toxic chemical with a 96-h LC₅₀ value of 32.45 μ g/L, followed by carbaryl (43.02 μ g/L) and diquat dibromide (1624 μ g/L). In the chemical mixture tests, the binary carbaryl/diquat dibromide mixture and the ternary carbaryl/diquat dibromide/fluoranthene mixture had additive results.