Genetic amniocentesis in biamniotic twin pregnancies by a single transabdominal insertion of the needle

We present a technique to aspirate amniotic fluid from both sacs in biamniotic twin pregnancies using a single abdominal insertion with a spinal needle. It was successful in 48 out of 55 cases of biamniotic twin pregnancies referred to our perinatal unit between 1985 and 1994. The single insertion technique was used when the inter-amniotic membrane was clearly evident and two separate free amniotic fluid pools could be reached by the operator with a single puncture. An adequate amount of amniotic fluid was sampled from both sacs to make a cytogenetic diagnosis in all cases. There were four fetuses with trisomy 21 in three twin pregnancies. In two cases, only one twin was affected whilst the co-twin was normal, so that a selective feticide was performed. No miscarriages due to genetic amniocentesis were reported. After 1990, all genetic amniocenteses in biamniotic twin pregnancies (except for one case due to late booking) were performed between 14 and 15 weeks of gestation and with all cases except one, it was possible to sample both twins by a single puncture. We suggest that early amniocentesis (14–15 weeks) by a single abdominal puncture could be a reliable and safe alternative to first-trimester chorionic villus sampling in twin pregnancies.     

Factors associated with multiple-pass procedures during chorionic villus sampling: A video analysis

Multiple placental passes during chorionic villus sampling (CVS) increase the risk of fetal loss; however, specific factors that predispose to repeat aspiration have not been delineated. To identify anatomic and technical variables associated with multiple-pass procedures, a detailed review of 205 videotaped CVS procedures (single pass = 163; multiple pass = 42) was performed, blinded to pregnancy outcome. The route of sampling did not influence the need for multiple aspiration attempts (transabdominal—30/ 135; transcervical—12/70), nor was placental location alone discriminatory. However, the combination of a posterior placenta and uterine retroversion was observed more frequently in the multiple-pass cohort (8/42 vs. 9/163; p<0.05). In transabdominal cases, suboptimal needle placement (e.g., perpendicular to the placental long axis) was more common in the initial aspiration of a multiple-pass procedure (21/30 vs. 38/105;p<0.01), while limited penetration of the catheter tip (e.g., just inside the placental edge) characterized a majority of multiple-pass cases in the transcervical subset (7/12 vs. 3/58; p<0.0001). A case-control cohort was constructed to evaluate the impact of these technical variables on sampling efficacy, independent of the influence of uterine position and placental site. In that analysis, suboptimal location and/or orientation of the sampling device remained characteristic of multiple-pass cases. We conclude that further reduction in the frequency of multiple-pass procedures might be achieved by consistent placement of the device tip in the central placental mass. Unlike amniocentesis, where any point of amnion entry will suffice, this technical nuance should be emphasized with CVS to maximize the single-pass success rate.     

Analysis of the hydrocyclone stock cleaning process for wasted fibre in a paper mill

The main objective of this project was to evaluate the possibility of reducing the quantity of fibre wasted at one of many hydrocyclone (centrifugal) cleaning processes in a paper mill. It was found that the application of elutriation water to both the tertiary and quaternary cleaners was essential to minimise the fibre discharged to the sewer, and the pressure of this elutriation water had a dramatic effect of reducing the fibre wastage. Accordingly, it has been shown that 150–160 kPa as the optimum pressure range to apply elutriation water to minimise the product grade fibre wasted whilst sending undesired shive fibre to the sewer. Also, monitoring of the press uhle box wastewater revealed that the paper mill has the potential to make substantial cost savings by reducing the waste stream. Further investigation is necessary to determine the types of fibre that are being wasted, and the viability of a screen to recycle the wasted fibre to the process. However, these fibres may be unsuitable to reuse in the process and alternative uses must be found.     

Chinese life cycle impact assessment factors

ＩｎｔｒｏｄｕｃｔｉｏｎＬｉｆｅｃｙｃｌｅａｓｓｅｓｓｍｅｎｔ(ＬＣＡ)ｉｓａｎｅｎｖｉｒｏｎｍｅｎｔａｌｍａｎａｇｅｍｅｎｔｔｏｏｌｔｈａｔｉｓｕｓｅｄｔｏｅｘａｍｉｎｅａｎｄｅｖａｌｕａｔｅｔｈｅｅｎｖｉｒｏｎｍｅｎｔａｌｉｍｐａｃｔｓａｓｓｏｃｉａｔｅｄｗｉｔｈｔｈｅｅｘｉｓｔｅｎｃｅｏｆｐｒｏｄｕｃｔｓ(Ｊｅｎｓｅｎ,1998;Ｗｅｉｄｅｍａ,1997;Ｗｅｎｚｅｌ,1997).ＴｈｅｆｏｃｕｓｏｆＬＣＡｉｓｏｎｔｈｅｅｎｔｉｒｅｌｉｆｅｃｙｃｌｅｏｆｔｈｅｐｒｏｄｕｃｔ,ｉ.ｅ.ｆｒｏｍｔｈｅｅｘｔｒａｃｔｉ…     

The significance of prenatal diagnosis of choroid plexus cysts

A case is described of the prenatal diagnosis of choroid plexus cysts at 17 weeks' gestation which persisted beyond 36 weeks but could not be detected after delivery. At birth the child was found to have trisomy 18.     

Prenatal diagnosis of isolated bilateral microphthalmia with confirmation by evaluation of products of conception obtained by dilation and evacuation

We describe the prenatal diagnosis of isolated bilateral fetal microphthalmia in a woman at increased risk of having a fetus with microphthalmia. Ultrasound examinations at 161 and 19-5 weeks' gestation demonstrated bilateral fetal microphthalmia with no other associated structural defects. The patient elected to terminate her pregnancy at 19.5 weeks. Pathological evaluation of the products of conception obtained by dilation and evacuation confirmed the prenatal diagnosis of isolated bilateral fetal microphthalmia.     

Serial Elastic Elements in the Damselfly Wing: Mobile Vein Joints Contain Resilin

 Two main types of joints occur in the damselfly wing: mobile and immobile. Some longitudinal veins (RP2^–, RP3&4^–, and MP^–) are elastically joined with cross veins, whereas other longitudinal veins (IR1⁺, IR2⁺, MA⁺, CuA'⁺) are firmly joined with cross veins. In this study we mapped the distribution of serial elastic elements in the wing. The occurrence of resilin, a rubberlike protein, in mobile joints suggests that the automatic twisting mechanism of the leading edge by aerodynamic force works not by flexibility but by the elasticity of these joints. First, it should result in elastic energy storage in the distal areas of the wing. Second, serial elastic elements of wing presumably act as dampers of an aerodynamic force, which are responsible for gradual twisting of the leading edge. Received: 16 March 1999 / Accepted in revised form: 26 August 1999