Multi-criteria evaluation technique for SFI site identification of NORMS and oil industry waste disposal – Possibilities in Kuwait

Waste generation and accumulating quantities of oil field waste are a matter of environmental concern. This study proposes the Slurry Fracture Injection (SFI) technique as an alternative waste disposal method. The slurried solids injection waste disposal method is environmentally secure and permanent, leaving no future liabilities that must be risk-evaluated or priced. An entire waste stream comprising ground solids and waste water can be injected into deep and hydraulically secure target strata with no contamination of potable water-bearing formations or formations outside the target zone that may contain resources (gas and oil). The slurry injection method can be used to clean and reclaim landfills, oil pits and granular waste dumps. This article proposes a two-tier screening method for evaluating the feasibility of this technique and the identification of suitable target zones. A stringent environmental and process control monitoring program should complement the planning and operational period to ensure environmental protection, waste containment, and regulatory HSE compliance.     

Application of lime and calcium hypochlorite in the dephenolisation and discolouration of olive mill wastewater

The application of hypochlorite for the removal of soluble COD, phenolic and polyphenolic like compounds, and other organic compounds responsible for the olive mill wastewater (OOWW) colour has been experimentally studied. After the OOWW filtration on a sand column, the effluent was subjected to a fast liming under optimal conditions. Lime application reduced polyphenols, COD and SS contents to half of their initial values but an important blackening of the treated OOWW was observed, especially when adding high concentrations of lime (10% (W/V) and 15% (W/V)).A second stage of treatment was applied using calcium hypochlorite. In this stage, removal of the studied compounds reached as much as 95% at higher concentrations, and particularly the colouring of OOWW which is generally difficult to eliminate was greatly reduced. The OOWW hypochloration acted through coagulation–flocculation and a rapid oxidation of the organic matter proceeded from the first 5 min. The kinetic study of the degradation of the waste polluting compounds from liming showed that Ca(ClO)₂ reacts similarly in the elimination of organic compounds, polyphenols, SS and colouration. The analysis of the organochloride compounds generated by the reaction between hypochlorite and the organic compounds showed that DDD, DDT and the heptachlor contents exceeded the values recommended by the International and European drinking water standards.     

Efficiency of perchlorate consumption in road flares, propellants and explosives

When an explosive detonates or a propellant or flare burns, consumption of the energetic filler should be complete but rarely is, especially in the presence of large amounts of non-combustible materials. Herein we examine three types of perchlorate-containing devices to estimate their potential as sources of contamination in their normal mode of functioning. Road flares, rocket propellants and ammonium nitrate (AN) emulsion explosives are potentially significant anthropogenic sources of perchlorate contamination. This laboratory evaluated perchlorate residue from burning of flares and propellants as well as detonations of ammonium nitrate emulsion explosives. Residual perchlorate in commercial products ranged from 0.094 mg perchlorate per gram material (flares) to 0.012 mg perchlorate per gram material (AN emulsion explosives). The rocket propellant formulations, prepared in this laboratory, generated 0.014 mg of perchlorate residue per gram of material.     

Virtues of simple hydro-economic optimization: Baja California, Mexico

This paper uses simple hydro-economic optimization to investigate a wide range of regional water system management options for northern Baja California, Mexico. Hydro-economic optimization models, even with parsimonious model formulations, enable investigation of promising water management portfolios for supplying water to agricultural, environmental and urban users. CALVIN, a generalized hydro-economic model, is used in a case study of Baja California. This drought-prone region faces significant challenges to supply water to agriculture and its fast growing border cities. Water management portfolios include water markets, wastewater reuse, seawater desalination and infrastructure expansions. Water markets provide the flexibility to meet future urban demands; however conveyance capacity limits their use. Wastewater reuse and conveyance expansions are economically promising. At current costs desalination is currently uneconomical for Baja California compared to other alternatives. Even simple hydro-economic models suggest ways to increase efficiency of water management in water scarce areas, and provide an economic basis for evaluating long-term water management solutions.     

Transport of fecal bacteria by boots and vehicle tires in a rural Alaskan community

People living without piped water and sewer can be at increased risk for diseases transmitted via the fecal-oral route. One rural Alaskan community that relies on hauling water into homes and sewage from homes was studied to determine the pathways of fecal contamination of drinking water and the human environment so that barriers can be established to protect health. Samples were tested for the fecal indicator, Escherichia coli, and the less specific indicator group, total coliforms. Shoes transported fecal contamination from outside to floor material inside buildings. Contamination in puddles on the road, in conjunction with contamination found on all-terrain vehicle (ATV) tires, supports vehicle traffic as a mechanism for transporting contamination from the dumpsite or other source areas to the rest of the community. The abundance of fecal bacteria transported around the community on shoes and ATV tires suggests that centralized measures for waste disposal as well as shoe removal in buildings could improve sanitation and health in the community.     

Development and Use of a Sedimentation Risk Index for Unpaved Road‐Stream Crossings in the Choctawhatchee Watershed1

Abstract: Unpaved road‐stream crossings increase sediment yields in streams and alter channel morphology and stability. Before restoration and sedimentation reduction strategies can be implemented, a priority listing of unpaved road‐stream crossings must be created. The objectives of this study were to develop a sedimentation risk index (SRI) for unpaved road‐stream crossings and to prioritize 125 sites in the Choctawhatchee watershed (southeastern Alabama) using this model. Field surveys involved qualitative and quantitative observations of 73 metrics related to waterway conditions, crossing structures, road approaches, and roadside soil erosion. The road‐stream crossing risk analyses involved elimination of candidate metrics based on redundancy, skewness, lack of data, professional judgment, lack of nonzero values, unbalanced box plots, and limited ranges of values. A final selection of 12 metrics formed the SRI and weighed factors involving soil erodibility, road sedimentation abatement features, and stream morphology alteration. The SRI was organized into narrative categories (excellent, good, fair, poor, and very poor) based on the distribution of scores. No excellent sites (scores ≥55) were found in this study, 17 (20.7%) were good (low sedimentation risk), 37 (45.1%) were fair (moderate sedimentation risk), 26 (31.7%) were poor (high sedimentation risk), and two (2.5%) were very poor (high sedimentation risk). There was no significant difference in SRI scores among crossing structure type (round culverts, box culverts, and bridges) (H = 4.31, df = 2, p = 0.058). A future study of the Choctawhatchee watershed involving the same study sites could assess the success of restoration plans and activities based on site score improvement or decline.     

Beyond the Prevention of Harm: Animal Disease Policy as a Moral Question

European animal disease policy seems to find its justification in a “harm to other” principle. Limiting the freedom of animal keepers—e.g., by culling their animals—is justified by the aim to prevent harm, i.e., the spreading of the disease. The picture, however, is more complicated. Both during the control of outbreaks and in the prevention of notifiable, animal diseases the government is confronted with conflicting claims of stakeholders who anticipate running a risk to be harmed by each other, and who ask for government intervention. In this paper, we first argue that in a policy that aims to prevent animal diseases, the focus shifts from limiting “harm” to weighing conflicting claims with respect to “risks of harm.” Therefore, we claim that the harm principle is no longer a sufficient justification for governmental intervention in animal disease prevention. A policy that has to deal with and distribute conflicting risks of harm needs additional value assumptions that guide this process of assessment and distribution. We show that currently, policies are based on assumptions that are mainly economic considerations. In order to show the limitations of these considerations, we use the interests and position of keepers of backyard animals as an example. Based on the problems they faced during and after the recent outbreaks, we defend the thesis that in order to develop a sustainable animal disease policy other than economic assumptions need to be taken into account.