A case study of an isolated wind powered electricity system meeting 100% of local demand

Using meteorological and electricity demand data for a 4-year period, electricity demand in Shetland was modeled to provide an estimate of the demand over a 30-year period from 1 January 1981. That modeled demand was then compared to estimated wind power output over the same period using the WAsP model. The wind farm output was estimated for a range of sizes of wind farm up to the consented 370 MW Viking Wind Farm in Shetland. Some wind power was available for 94% of the time and the 370 MW wind farm would meet 100% of demand for nearly 80% of the time. The statistics of single and accumulated deficits were calculated for a range of wind farms and estimates of the amount of additional generation capacity and additional power requirements were assessed. The study suggests that with storage, wind power in Shetland could meet all electricity demand in Shetland at around £130 to £150/MWh (excluding subsidy) and with a grid connection allowing the sale of excess power, those costs could be reduced.     

Defining the Diurnal Pattern of Snowmelt Using a Beta Distribution Function

Snow is an important component of the hydrologic cycle for many regions worldwide. In addition to vital water resources, snowmelt can be important for forest ecosystem dynamics and flood risk. However, standard design events in the United States lack a design snowmelt event, including only precipitation events, though snowmelt has been shown to be larger than rainfall. In this article, we present a method using hourly snow water equivalent data to develop and test a function for representing the diurnal pattern of snowmelt. A two‐parameter beta distribution function is modified for the purposes of this study and found to fit the pattern of snowmelt well with a root mean squared error of 0.008. Soil moisture sensors were additionally utilized to assess the timing of the snowmelt water outflow from the base of the snowpack that supports the shape of the function, but suggests that the timing of losses recorded on snow pillows lag as much as 3 h. Further testing of the function showed the shape of the function to be accurate. The methods developed and tested in this paper can be applied for design purposes comparing snowmelt and rainfall events or to improve hydrological models investigating processes such as streamflow or groundwater recharge.     

The multifunctionality of urban farming: perceived benefits for neighbourhood improvement

Urban farming – a type of urban agriculture focused on entrepreneurial food production – serves multiple functions in neighbourhoods; yet these are not well delineated. Expectations for urban farming often centre on traditional measures of economic development, potentially overlooking other benefits. Through a qualitative case study conducted in Baltimore, Maryland, we sought to understand community perceptions regarding the ways in which urban farms can benefit cities. Interviews with residents, neighbourhood leaders, and urban farmers in three residential neighbourhoods with urban farms revealed the pathways by which community members view farms as improving neighbourhoods. Benefits stemmed from four primary changes urban farms made to study neighbourhoods: creation of public projects welcoming involvement, physical improvement of degraded space, production of local food, and creation of new businesses. These changes led to multiple perceived benefits including increased social connectedness, a transformed physical landscape, improved neighbourhood reputation, increased access to fresh produce, and educational, youth development, and employment opportunities. Our findings demonstrate the importance of a multifunctional paradigm that accounts for social and educational functions in assessing the value of urban farming and bring empirical evidence to the concept of multifunctional agriculture. Urban farms with strong social aims may appear to contribute little to economic development if measured using traditional indicators of success such as job creation or fiscal impacts, but provide numerous other benefits for community development.     

Improving photostability and efficiency of polymeric luminescent solar concentrators by PMMA/MgO nanohybrid coatings

MgO nanocrystals were synthesized and doped with different concentrations in poly(methylmethacrylate) (PMMA) to prepare hybrid organic-inorganic coatings based on polymer nanohybrid thin films. The nanoparticles were found to be spherical with 62 nm diameter as determined by X-ray diffraction (XRD) and atomic force microscope (AFM). The coatings were characterized by spectroscopic tools such as optical absorption, transmission and fluorescence spectroscopy. The prepared nanohybrid films were spin-coated on cost-effective luminescent PMMA substrates doped with highly efficient luminescent dyes luminescent solar concentrators (LSCs). The outdoor photostability tests demonstrated enhanced protection against UVA radiation for coated LSCs compared to bare LSC substrates. The current–voltage characteristics of commercially produced LSC prototypes showed that the poor UV response of monocrystalline silicon solar cell can be improved by for LSCs coated by PMMA/MgO nanohybrid films which act as luminescent down shifting layer (LDSL).     

Resiliency and Continuity: Hurricane Sandy and The City University of New York

Environmental, Health, and Safety (EHS) managers shoulder additional responsibilities with storm preparedness planning—and play host to storm evacuees     

Microbial fuel cells: Advances in electrode modifications for improvement of system performance

There is an increasing trend to conduct the researches related to Microbial Fuel Cells (MFCs) in the recent years. Limited power output has been the major obstacle for the practical application and upscaling of MFCs. Attempts have been made on electrode modifications such as anode treatments, cathode modifications with catalysts and bio cathodes developments to produce varying degrees of improved output current depending upon the types of modifications. Power density and Coulombic efficiency have been considered as the important parameters to analyze the system performances. This paper overviews on the advances made in MFCs’ researches focusing on different types of electrodes modifications along with the involved methodology. Furthermore, the system performances of different modified MFCs are compared in terms of the power density and the Coulombic efficiency.     

Linking the EU emissions trading scheme: economic implications of allowance allocation and global carbon constraints

We investigate the role of domestic allowance allocation and global emissions constraints for the carbon-market impacts of linking the EU Emissions Trading Scheme (ETS) internationally. Employing a quantitative simulation model of the global carbon market, we find that the economic benefits from connecting the European ETS to emerging non-EU schemes strongly depend on the regional allowance allocation of the linking participants: In a world of moderate carbon constraints, an economically efficient regional allowance allocation induces a much stronger fall in total compliance costs than a sub-optimal (i.e. too high) domestic allocation of emissions permits. However, a more efficient (i.e. stricter) allocation shifts abatement efforts and compliance costs to energy-intensive industries which are covered by the domestic ETS. We further find that committing to ambitious global emissions reduction targets (compatible with stabilizing CO₂ concentrations at 450 ppm) induces much stronger regional abatement efforts and substantially higher compliance costs for the abating regions. In such an ambitious climate policy regime, an efficient domestic allocation of allowances is even more important from an economic perspective: Here, linking emissions trading schemes diminishes the associated compliance costs on the largest scale.

Local governance of greenhouse gas emissions from air travel

Global greenhouse gas emissions from air travel (GHG-A) are on the rise, and projections point towards a rapid growth in the coming decades. This study aims to examine how local government (cities), addresses GHG-A in their Sustainable Energy Action Plans (SEAP). To fulfil this aim, over 200 SEAPs were analysed focusing on three issues: (1) Treatment of GHG-A in local emissions inventories; (2) Policy initiatives within this domain; and (3) The cities’ perceptions of the conflicts of interests. Results showed that more than half of the cities acknowledge the challenge of GHG-A, around one third include GHG-A in their emissions inventories, and more than one quarter have initiated policy interventions. To categorise these interventions, we have added a mode ‘governing by agenda setting’ to an existing analytical framework, ‘Modes of governing’. With their authority limited to the local setting, this mode of governing is a common channel for cities to push changes at higher levels.