Uptake of dyes by a promising locally available agricultural solid waste: coir pith

The adsorption of rhodamine-B and acid violet by coir pith carbon was carried out by varying the parameters such as agitation time, dye concentration, adsorbent dose and pH. The adsorption followed both Langmuir and Freundlich isotherms. The adsorption capacity was found to be 2.56 mg and 8.06 mg dye per g of the adsorbent for rhodamine-B and acid violet, respectively. Adsorption of dyes followed first order rate kinetics. Acidic pH was favorable for the adsorption of acid violet and alkaline pH was favorable to rhodamine-B. Desorption studies showed that alkaline pH was favorable for the desorption of acid violet and acidic pH was favorable for the desorption of rhodamine-B.     

Characterization of bacterial diversity in an atrazine degrading enrichment culture and degradation of atrazine,cyanuric acid and biuret in industrial wastewater

An enrichment culture was used to study atrazine degradation in mineral salt medium (MSM) (T1), MSM+soil extract (1:1, v/v) (T2) and soil extract (T3). Results suggested that enrichment culture required soil extract to degrade atrazine, as after second sequential transfer only partial atrazine degradation was observed in T1 treatment while atrazine was completely degraded in T2 and T3 treatments even after fourth transfer. Culture independent polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) technique confirmed selective enrichment of genus Bacillus along with Pseudomonas and Burkholderia. Degradation of atrazine/metabolites in the industrial wastewater was studied at different initial concentrations of the contaminants [wastewater-water (v/v) ratio: T1, 1:9; T2, 2:8; T3, 3:7; T4, 5:5 and T5, undiluted effluent]. The initial concentrations of atrazine, cyanuric acid and biuret ranged between 5.32 and 53.92 µg mL^?1, 265.6 and 1805.2 µg mL^?1 and 1.85 and 16.12 µg mL^?1, respectively. The enrichment culture was able to completely degrade atrazine, cyanuric acid and biuret up to T4 treatment, while no appreciable degradation of contaminants was observed in the undiluted effluent (T5). Inability of enrichment culture to degrade atrazine/metabolites might be due to high concentrations of cyanuric acid. Therefore, a separate study on cyanuric acid degradation suggested: (i) no appreciable cyanuric acid degradation with accumulation of an unidentified metabolite in the medium where cyanuric acid was supplemented as the sole source of carbon and nitrogen; (ii) partial cyanuric acid degradation with accumulation of unidentified metabolite in the medium containing additional nitrogen source; and (iii) complete cyanuric acid degradation in the medium supplemented with an additional carbon source. This unidentified metabolite observed during cyanuric acid degradation and also detected in the enrichment culture inoculated wastewater samples, however, was degraded up to T4 treatments and was persistent in the T5 treatment. Probably, accumulation of this metabolite inhibited atrazine/cyanuric acid degradation by the enrichment culture in undiluted wastewater.     

Recovery of hydrogen and removal of nitrate from water by electrocoagulation process

The present study provides an optimization of electrocoagulation process for the recovery of hydrogen and removal of nitrate from water. In doing so, the thermodynamic, adsorption isotherm, and kinetic studies were also carried out. Aluminum alloy of size 2 dm² was used as anode and as cathode. To optimize the maximum removal efficiency, different parameters like effect of initial concentration, effect of temperature, pH, and effect of current density were studied. The results show that a significant amount of hydrogen can be generated by this process during the removal of nitrate from water. The energy yield calculated from the hydrogen generated is 3.3778 kWh/m³. The results also showed that the maximum removal efficiency of 95.9 % was achieved at a current density of 0.25 A/dm², at a pH of 7.0. The adsorption process followed second-order kinetics model. The adsorption of NO ₃ ^? preferably fitting the Langmuir adsorption isotherm suggests monolayer coverage of adsorbed molecules. Thermodynamic studies showed that adsorption was exothermic and spontaneous in nature. The energy yield of generated hydrogen was ~54 % of the electrical energy demand of the electrocoagulation process. With the reduction of the net energy demand, electrocoagulation may become a useful technology to treat water associated with power production. The aluminum hydroxide generated in the cell removes the nitrate present in the water and reduced it to a permissible level making the water drinkable.     

Seasonal variation of heavy metals in seagrasses along Thondi coast,Palk Bay,India

Environmental Science and Pollution Research - The present study deals with the bioaccumulation of heavy metals in different seagrass species (Syringodium isoetifolium, Halodule pinifolia,...     

The OEIS complex: two case reports that illustrate the spectrum of abnormalities and a review of the literature

We present two cases of OEIS (omphalocele, exstrophy, imperforate anus, spinal defects) complex -MIM 258040 and a review of the literature. Case 1 was a 14-year-old girl who presented at 30 weeks' gestation. An ultrasound examination showed an omphalocele and spina bifida; the bladder was not visualised. She went into spontaneous labour two weeks later and the baby died shortly after birth. A full post-mortem examination was refused, but the mother did agree to an external examination, skin biopsy for fibroblast culture, X rays and MR imaging. The MR imaging showed a pelvic kidney, a large omphalocele containing the other kidney, liver, bowel and a fluid filled structure thought to represent an exstrophy of the bladder (EB). Case 2 was a 30-year-old woman who had an ultrasound examination at 20 weeks' gestation; this showed an omphalocele, but the bladder was not visualised. The pregnancy was subsequently terminated and a post-mortem examination showed a low set umbilical cord associated with a small omphalocele; there was an imperforate anus; a blind ending rectum terminated in the omphalocele. We conclude that these two cases illustrate the variability of the OEIS complex. Copyright © 2006 John Wiley & Sons, Ltd.     

Is seat belt usage by front seat passengers related to seat belt usage by their drivers?

INTRODUCTION: Unrestrained drivers and passengers are involved in a significant amount of fatalities and injuries in motor-vehicle crashes in the United States. While the literature documents the effectiveness of seat belt usage in reducing crash outcomes, such as fatalities and the severity of injuries, there is a need to evaluate the impact of seat belt usage by drivers and passengers in their respective vehicles. These findings could help develop effective education and enforcement strategies to enhance occupant safety. METHOD: This paper summarizes a study comparing seat belt usage rates of drivers and passengers based on whether or not the driver uses a seat belt. Observational data from 50 sites in the state of Nevada over 3 years are used for analyses. The data are stratified based on the gender of the driver and passengers in the front seat of the vehicle and are based on area type (rural or urban). RESULTS: A comparison of the rates of seat belt usage across for the aggregated data and for various types of disaggregation and statistical analyses to compare the rates of seat belt use among passengers based on the use of seat belts by drivers confirms that when drivers use seat belts, their respective passengers are much more likely to use seat belts. Further, if drivers do not use seat belts, their passengers are not likely to use seat belts. This observation is comparable for male drivers and female drivers, and also for male passengers and female passengers. Further, there are no differences for combinations of the genders of the drivers and passenger (i.e., both male or female, or one male and one female). IMPACT ON INDUSTRY: These results suggest that education and enforcement strategies would benefit most by working toward increasing seat belt usage rates among drivers.     

Bioremediation of oil sludge-contaminated soil

Bioremediation has become an important method for the restoration of oil-polluted environments by the use of indigenous or selected microbial flora. Several factors such as aeration, use of inorganic nutrients or fertilizers and the type of microbial species play a major role in the remediation of oil-contaminated sites. Experiments were undertaken for bioremediation of oil sludge-contaminated soil in the presence of a bacterial consortium, inorganic nutrients, compost and a bulking agent (wheat bran). Experiments were conducted in glass troughs for the 90-day period. Bulked soil showed more rapid degradation of oil compared to all other amendments. During the experimental period, wheat bran-amended soil showed 76% hydrocarbon removal compared to 66% in the case of inorganic nutrients-amended soil. A corresponding increase in the number of bacterial populations was also noticed. Addition of the bacterial consortium in different amendments significantly enhanced the removal of oil from the petroleum sludge from different treatment units.     

Utilization of petroleum hydrocarbons by Pseudomonas fluorescens isolated from a petroleum-contaminated soil

A strain of Pseudomonas fluorescens, isolated from petroleum hydrocarbon-contaminated soil was examined for its ability to utilize a variety of hydrocarbon substrates. Surface tension measurements indicated the production of biosurfactant during the microbial degradation of hydrocarbon. The organism utilized both short and long chain n-alkanes. It emulsified a number of aliphatic and aromatic hydrocarbons.     

Simultaneous removal of Co,Cu, and Cr from water by electrocoagulation

This study provides an electrocoagulation process for the removal of metals such as cobalt, copper, and chromium from water using magnesium as anode and galvanized iron as cathode. The various parameters like pH, current density, temperature, and inter electrode distance on the removal efficiency of metals were studied. The results showed that maximum removal efficiency was achieved for cobalt, copper, and chromium with magnesium as anode and galvanized iron as cathode at a current density of 0.025?A?dm^?2 at pH 7.0. First- and second-order rate equations were applied to study adsorption kinetics. The adsorption process follows second-order kinetics model with good correlation. The Langmuir and Freundlich adsorption isotherm models were studied using the experimental data. The Langmuir adsorption isotherm favors monolayer coverage of adsorbed molecules for the adsorption of cobalt, copper, and chromium. Temperature studies showed that adsorption was endothermic and spontaneous in nature.