Impacts of cadmium addition on the alteration of microbial community and transport of antibiotic resistance genes in oxytetracycline contaminated soil

The large-scale development in livestock feed industry has increased the chances of antibiotics and heavy metals contamination in the soil. The fate of antibiotic resistance genes (ARGs) and microbial community in heavy metals and antibiotic contaminated soil is still unclear. In this study, we investigated the effect of cadmium (Cd) addition on the transport of ARGs, microbial community and human pathogenic bacteria in oxytetracycline (OTC) contaminated soil. Results showed that the addition of OTC significantly increased the abundance of ARGs and intI1 in the soil and lettuce tissues. The addition of Cd to OTC treated soil further increased the abundance and translocation of ARGs and intI1. Moreover, Cd promoted the transfer of potential human pathogenic bacteria (HPB) into lettuce tissues. Compared with O10 treatment, the addition of Cd decreased the concentration of OTC in soil and lettuce tissue, but slightly increased the fresh weight of lettuce tissues. Redundancy analysis indicated that bacterial community succession is a major factor in ARGs variation. Network analysis indicated that the main host bacteria of ARGs were mainly derived from Proteobacteria. Correlation analysis showed that intI1 was significantly correlated with tetG, tetC, sul1, sul2, ermX, and ermQ. Meanwhile, potential HPB (Clostridium, and Burkholderia) was significantly correlated with intI1 and eight ARGs (tetG, tetC, tetW, tetX, sul1, sul2, ermX, and ermQ.). The findings of this study suggest that the addition of heavy metals to agricultural fields must be considered in order to reduce the transfer of ARGs in the soil and crops.     

Heavy metal contamination in water, soil, and vegetables of the industrial areas in Dhaka, Bangladesh

Concentrations of Cu, Zn, Pb, Cr, Cd, Fe, and Ni have been estimated in soils and vegetables grown in and around an industrial area of Bangladesh. The order of metal contents was found to be Fe > Cu > Zn > Cr > Pb > Ni > Cd in contaminated irrigation water, and a similar pattern Fe > Zn > Ni > Cr > Pb > Cu > Cd was also observed in arable soils. Metal levels observed in different sources were compared with WHO, SEPA, and established permissible levels reported by different authors. Mean concentration of Cu, Fe, and Cd in irrigation water and Cd content in soil were much above the recommended level. Accumulation of the heavy metals in vegetables studied was lower than the recommended maximum tolerable levels proposed by the Joint FAO/WHO Expert Committee on Food Additives (1999), with the exception of Cd which exhibited elevated content. Uptake and translocation pattern of metal from soil to edible parts of vegetables were quite distinguished for almost all the elements examined.     

Polybrominated diphenyl ethers (PBDEs) in soils along a rural-urban-rural transect: sources, concentration gradients, and profiles

This study reports concentrations of PBDEs in surface soil samples collected along a 140 km transect across Kuwait to assess the role of urban centers as sources of persistent organic pollutants to the surrounding environment. The ΣPBDE concentrations varied by a factor of ∼250 and ranged from 289 to 80,078 pg g⁻¹ d.w. The concentrations of PBDEs in Kuwait City were significantly higher (p < 0.01) than those collected from sites outside the city supporting the hypothesis that urban centers are sources of PBDEs. The congener profiles were dominated by BDE-209, accounting for 93% of the PBDEs in the soil samples. The concentrations of all congeners (except BDE-209) were highly correlated with percent organic carbon (%OC) (p > 0.05) when the data from Kuwait City was omitted from the analysis. These findings suggest that soil concentrations outside the urban centers were close to equilibrium with the atmosphere.     

Decolorization of Blue CL-BR dye by AOPs using bleach wastewater as source of H2O2

This research was focused on the investigation of the efficacy of advanced oxidation processes (Fenton,ozonation and UV/H_2O_2) for decolorization of reactive azo dye (Blue CL-BR) using bleach wastewater as possible source of H_2O_2.All the experiments were performed on the laboratory scale set-up.The results showed that colour removal efficiencies by UV or bleach (H_2O_2) alone were not so efficient.Fenton process with bleach wastewater was found to be the most effective at process conditions such as pH of 3 and H_2O_2/Fe~(2 ) ratio of 24:1,resulting in 64% colour removal.Almost complete colour removal,i.e.,99% and 95% were achieved by UV/H_2O_2 and UVfoleach wastewater in 30 and 60 min,respectively.Ozonation proved an efficient method for decolorization of Blue CL-BR dye at alkaline pH.It was possible to achieve 98% colour removal with 30 min of ozonation at pH 9.The colour removal of dye was found to follow first order kinetics.     

Review: Efficiently performing periodic elements with modern adsorption technologies for arsenic removal

Environmental Science and Pollution Research - Arsenic (As) toxicity is a global phenomenon, and it is continuously threatening human life. Arsenic remains in the Earth’s crust in the forms...     

Structural Characterization of Natural Fiber Reinforced Polymeric (NFRP) Laminates for Building Construction

This study focuses on the structural characterization of Natural Fiber Reinforced Polymeric (NFRP) laminates for their potential application in structural insulated panels in order to replace traditional Oriented Strand Board (OSB) laminates. To this end, mechanical testing such as bending test and low velocity impact test were performed on the laminates made up of bleached and unbleached jute fibers and the results were compared with OSB laminates and Glass/Polypropylene (G/PP) laminates. The results showed significant improvement in the mechanical properties of the resulting laminates such as bending strength by 176%, the modulus of elasticity by 129% and, the load carrying capacity by 179%. The energy absorbed by NFRP was 18% higher than OSB and 26% higher resistance to impact loading.     

People’s dependency on forest resources and contributions of forests to the livelihoods: a case study in Chittagong Hill Tracts (CHT) of Bangladesh

The study was conducted to investigate people’s forest dependency and contributions of forests to the livelihoods in the three hill districts of Chittagong Hill Tracts (CHT), Bangladesh. The study revealed that forest resources contribute significantly to rural community’s livelihoods and economic well-being. Using generalized logistic regressions, this study has also investigated the socioeconomic factors that affect people’s dependency on forest resources of CHT. The study revealed that people’s income from forest and forest-related occupation was positively aligned with their forest dependency. However, their education level significantly reduced their dependency on forest resources. Thus, educating the forest-dependent people and supporting alternative income generation activities should be appreciated for effective forest management in CHT. This study will be helpful to forest and environmental policy makers for CHT.     

Implementation of the semi-aerobic landfill system (Fukuoka method) in developing countries: a Malaysia cost analysis

Most of the existing solid waste landfill sites in developing countries are practicing either open dumping or controlled dumping. Proper sanitary landfill concepts are not fully implemented due to technological and financial constraints. Implementation of a fully engineered sanitary landfill is necessary and a more economically feasible landfill design is crucial, particularly for developing countries. This study was carried out by focusing on the economics from the development of a new landfill site within a natural clay area with no cost of synthetic liner up to 10 years after its closure by using the Fukuoka method semi-aerobic landfill system. The findings of the study show that for the development of a 15-ha landfill site in Malaysia with an estimated volume of 2,000,000 m(3), the capital investment required was about US 1,312,895 dollars, or about US 0.84 dollars/tonne of waste. Assuming that the lifespan of the landfill is 20 years, the total cost of operation was about US 11,132,536 dollars or US 7.15 dollars/tonne of waste. The closure cost of the landfill was estimated to be US 1,385,526 dollars or US 0.89 dollars/tonne of waste. Therefore, the total cost required to dispose of a tonne of waste at the semi-aerobic landfill was estimated to be US 8.89 dollars. By considering an average tipping fee of about US 7.89 dollars/tonne of waste in Malaysia in the first year, and an annual increase of 3% to about US 13.84 dollars in year-20, the overall system recorded a positive revenue of US 1,734,749 dollars. This is important information for the effort of privatisation of landfill sites in Malaysia, as well as in other developing countries, in order to secure efficient and effective landfill development and management.     

Qualitative assessment on premature human mortality due to the emission of fine particulate matter from the Matarbari coal power plant

This study reports the probability of increased mortality of people within the political border of Bangladesh due to the emission of fine particulate matter with diameters of 2.5 microns or less (PM_2.5) from the Matarbari coal power plant (MCPP). A Gaussian plume dispersion model has been used for this estimation. The PM_2.5 emission rate data are unavailable as the construction of MCPP is still in its initial stage; therefore, the anticipated PM_2.5 emission rate has been estimated based on data from a number of coal‐fired power plants in India and China. To make this study more meaningful, two different emission rates have been considered representing the best‐case and worst‐case scenarios. In both cases, the intake fraction has been found to be 0.12×10^?2, and the value of relative risk varies between 1.134 and 1.374, respectively. Finally, it is estimated that approximately 11.5 million people inside Bangladesh will be exposed to the PM_2.5 emission from MCPP, and between 7,667 and 17,675 people will experience premature death every year.     

Studies on heavy metals in the ground waters of the city of Aligarh U.P. (India)

A study was conducted to determine the levels of heavy metals Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn along with physico-chemical parameters in ground waters of Aligarh city, U.P. (India). Twenty seven samples of hand pump water and twenty three samples of municipal water supply were collected from different localities of the Aligarh city, five times during the period of two months at intervals of 12 days. The samples were analysed for physico-chemical characteristics (pH, electrical conductivity, chlorides, sulphates, total hardness, total alkalinity, nitrate-nitrogen, fluoride, calcium and magnesium) and heavy metal contents. The concentrations of heavy metals in the hand pump water samples were found in the ranges of Cd (ND-5.00); Cr (ND-30.00); Cu (ND-82.50); Fe (16.80–460.00); Mn (ND-425.00); Ni (ND-25.00); Pb (ND-25.00) and Zn (28.60–775.00) g l^–1. The heavy metal concentrations in the municipal water supply samples were found to be Cd (ND-5.00); Cr (ND-25.00); Cu (ND-37.50); Fe (8.00–37.50); Mn (ND-320.00); Ni (ND-25.00); Pb (ND-25.00) and Zn (2.00–271.87) g l^–1.It appears from the results of these studies the concentrations of Cd, Cr, Cu, Ni, Pb, and Zn in the ground waters of the Aligarh City were found to be lower than the prescribed limits of World Health Organisation (1984), whereas the values of Fe and Mn were found above the prescribed limits in some localities. The chloride total hardness and nitrate-nitrogen were comparatively higher in the hand pump water than the municipal supply water. The reason of higher values of these parameters may be ascribed to the surface disposal of sewage wastes, wastes from metal processing industries and other house hold refuses.