Structural Characterization of Natural Fiber Reinforced Polymeric (NFRP) Laminates for Building Construction

This study focuses on the structural characterization of Natural Fiber Reinforced Polymeric (NFRP) laminates for their potential application in structural insulated panels in order to replace traditional Oriented Strand Board (OSB) laminates. To this end, mechanical testing such as bending test and low velocity impact test were performed on the laminates made up of bleached and unbleached jute fibers and the results were compared with OSB laminates and Glass/Polypropylene (G/PP) laminates. The results showed significant improvement in the mechanical properties of the resulting laminates such as bending strength by 176%, the modulus of elasticity by 129% and, the load carrying capacity by 179%. The energy absorbed by NFRP was 18% higher than OSB and 26% higher resistance to impact loading.     

People’s dependency on forest resources and contributions of forests to the livelihoods: a case study in Chittagong Hill Tracts (CHT) of Bangladesh

The study was conducted to investigate people’s forest dependency and contributions of forests to the livelihoods in the three hill districts of Chittagong Hill Tracts (CHT), Bangladesh. The study revealed that forest resources contribute significantly to rural community’s livelihoods and economic well-being. Using generalized logistic regressions, this study has also investigated the socioeconomic factors that affect people’s dependency on forest resources of CHT. The study revealed that people’s income from forest and forest-related occupation was positively aligned with their forest dependency. However, their education level significantly reduced their dependency on forest resources. Thus, educating the forest-dependent people and supporting alternative income generation activities should be appreciated for effective forest management in CHT. This study will be helpful to forest and environmental policy makers for CHT.     

Do transportation taxes promote pro-environmental behaviour? An empirical investigation

The transportation sector is a crucial driver of energy intensity and environmental degradation. Therefore, we aim to explore the nexus of transportation taxes, energy intensity, and CO₂ emissions for the BICS economies. The econometric approaches, CS-ARDL and PMG-ARDL, have been employed to compute the estimates. The long-run estimates of the green transportation tax variable are negatively significant in both energy intensity and CO₂ emissions models irrespective of the estimation technique. These findings imply that green transportation taxes help reduce energy intensity and CO₂ emissions in BICS economies. Conversely, in the short-run, the effects of transportation taxes on energy intensity and CO₂ emissions are mixed and inconclusive. Hence, transportation taxes are necessary to keep the polluters under control not only from the transport sector but also serve as a deterrent for other sectors as well.

     

Molybdenum (Mo) increases endogenous phenolics,proline and photosynthetic pigments and the phytoremediation potential of the industrially important plant Ricinus communis L. for removal of cadmium from contaminated soil

Cadmium (Cd) in agricultural soil negatively affects crops yield and compromises food safety. Remediation of polluted soil is necessary for the re-establishment of sustainable agriculture and to prevent hazards to human health and environmental pollution. Phytoremediation is a promising technology for decontamination of polluted soil. The present study investigated the effect of molybdenum (Mo) (0.5, 1.0 and 2.0 ppm) on endogenous production of total phenolics and free proline, plant biomass and photosynthetic pigments in Ricinus communis plants grown in Cd (25, 50 and 100 ppm) contaminated soils and the potential for Cd phytoextraction. Mo was applied via seed soaking, soil addition and foliar spray. Foliar sprays significantly increased plant biomass, Cd accumulation and bioconcentration. Phenolic concentrations showed significantly positive correlations with Cd accumulation in roots (R ² = 0.793, 0.807 and 0.739) and leaves (R ² = 0.707, 721 and 0.866). Similarly, proline was significantly positively correlated with Cd accumulation in roots (R ² = 0.668, 0.694 and 0.673) and leaves (R ² = 0.831, 0.964 and 0.930). Foliar application was found to be the most effective way to deliver Mo in terms of increase in plant growth, Cd accumulation and production of phenolics and proline.

     

Role of non-timber forest products in sustaining forest-based livelihoods and rural households' resilience capacity in and around protected area: a Bangladesh study†

People in the developing world derive a significant part of their livelihoods from various forest products, particularly non-timber forest products (NTFPs). This article attempts to explore the contribution of NTFPs in sustaining forest-based rural livelihood in and around a protected area (PA) of Bangladesh, and their potential role in enhancing households' resilience capacity. Based on empirical investigation, our study revealed that local communities gather a substantial amount of NTFPs from national park despite the official restrictions. Twenty seven percent households (HHs) of the area received at least some cash benefit from the collection, processing and selling of NTFPs, and NTFPs contribute to HHs' primary, supplementary and emergency sources of income. NTFPs also constituted an estimated 19% of HHs' net annual income, and were the primary occupation for about 18% of the HHs. HHs' dependency on nearby forests for various NTFPs varied vis-à-vis their socio-economic condition, as well as with their location from the park. Based on our case study, the article also offers some clues for improving the situation in PA.     

A simple extraction procedure for determination of total mercury in crude oil

The determination of mercury in crude oil and petroleum products is particularly difficult due to the volatile nature of both mercury and the matrix, which may lead to significant loss of the analyte. A simple extraction method for total mercury has been developed to determine total mercury in crude oil using cold vapor atomic fluorescence spectrometry. The homogenized crude oil sample was diluted to 5, 10, and 20 % (w/w) in toluene. The diluted crude oil samples were spiked with 10 and 40 μg/kg (w/w). The samples were extracted using an oxidant/acid solution, BrCl/HCl. The mercury was extracted into the aqueous phase; the ionic mercury was then reduced to volatile elemental mercury (Hg⁰) by stannous chloride (SnCl₂). The mercury vapor was detected by Merlin cold vapor atomic fluorescence spectrometry at a 253.7-nm wavelength. The average recoveries for mercury in spiked diluted crude oil (10 and 40 μg/kg, w/w) were between 96 and 103 %, respectively, in 5 and 10 % spiked diluted crude oil. Whereas, low recoveries (<50 %) were recorded in 20 % diluted spiked crude oil. The method detection limit was calculated as t _{(0.01)(n ? 1)}?×?SD where t is the student's value for 99 % confidence level and standard deviation estimate with n???1 degrees of freedom. The method detection limit was found to be 0.38 μg/kg based on 5 g of diluted crude oil sample. The method is sensitive enough to determine low levels of mercury in crude oil.     

Acidification in Arabian Gulf--insights from pH and temperature measurements

The detrimental effects of increasing atmospheric levels of carbon dioxide (CO(2)) and other greenhouse gases since the industrial revolution has led to a concerted international effort to control their release and abate the environmental and human health impacts. CO(2) is removed from the atmosphere by photosynthesis of plants in the terrestrial environment and by aquatic sequestration. In the Middle East and other arid countries, terrestrial removal is minimal. The most likely removal pathway for CO(2) in arid regions around the world is by aquatic sequestration. In the Middle East the major sink is the Arabian Gulf which leads to acidification of the marine environment. Biweekly pH concentration measurements in surface waters of the northern Arabian Gulf over a four year period in this study suggest that the Arabian Gulf waters are becoming increasingly acidic with time. Supporting evidence for increased CO(2) sequestration comes from increased marine primary productivity over the past decade. Biological effects, such as coral bleaching, observed during this period suggest that urgent action is required to reverse the trend and protect marine life. The data highlight the fact that this semi-enclosed sea is undergoing a rapid degradation which may affect the oceanic chemistry and biogeochemical cycle much earlier than predicted for most oceanic waters.     

Metal pollution and ecological risk assessment in marine sediments of Karachi Coast, Pakistan

Concentrations of 12 metals (Fe, Mn, Cr, Mo, Ni, Pb, Se, Sr, U, V, Zn, and Zr) in surface sediments of Karachi Coast, Pakistan were determined to evaluate their distribution and pollution assessment. The measured metals in the sediments were found to be in the range of Fe, 0.84–6.96 %; Mn, 300–1,300 μg/g; Cr, 12.0–319.84 μg/g; Mo, 0.49–2.03 μg/g; Ni, 1.53–58.86 μg/g; Pb, 9.0–49.46 μg/g; Se, 0.25–.86 μg/g; Sr, 192–1185 μg/g; U, 0.19–1.66 μg/g; V, 15.80–118.20 μg/g; Zn, 15.60–666.28 μg/g; and Zr, 44.02–175.26 μg/g. The mean contents of the metal studied were: Fe, 3.07 %, Mn, 0.05 %; Cr, 96.75 μg/g; Mo, 1.34 μg/g; Ni, 31.39 μg/g; Pb, 23.24 μg/g; Se, 0.61 μg/g; Sr, 374.83 μg/g; U, 0.64 μg/g; V, 61.75 μg/g; Zn, 204.75 μg/g; and Zr:76.27 μg/g, and arrangement of the metals from higher to lower mean content in this area is: Fe?>?Zn?>?Mn?>?Sr?>?Zn?>?Cr?>?Zr?>?V?>?Ni?>?Pb?>?Mo?>?U?>?Se. There is no significant correlation among most of these metals, indicating different anthropogenic and natural sources. To assess ecotoxic potential of marine sediments, Numerical Sediment Quality Guidelines were also applied. The concentration of Pb in all the sediments except one was lower than the threshold effect concentration (TECs) showing that there are no harmful effects to marine life from Pb. On the other hand, the concentrations of Cr, Ni, and Zn exceeded TEC in three stations, indicating their potential risk. The degree of pollution in sediments for metals was assessed by calculating enrichment factor (EF) and pollution load index (PLI). The results indicated that sediments of Layari River Mouth Area, Fish Harbour, and KPT Boat Building Area are highly enriched with Cr and Zn (EF?>?5). Sediments of Layari River Outfall Zone were moderately enriched with Ni and Pb (EF?>?2). The pollution load index was found in the range of 0.98 to 1.34. Lower values of PLI (≤1) at most of sampling locations imply no appreciable input from anthropogenic sources. However, relatively higher PLI values (>1) at Layari River Mouth Area, Fish Harbour, and KPT Boat Building Area are attributed to increased human activity in the area.     

Adsorption of methylene blue from aqueous solution by jackfruit (Artocarpus heteropyllus) leaf powder: A fixed-bed column study

Continuous fixed-bed studies were undertaken to evaluate the efficiency of jackfruit leaf powder (JLP) as an adsorbent for the removal of methylene blue (MB) from aqueous solution under the effect of various process parameters like bed depth (5–10 cm), flow rate (30–50 mL/min) and initial MB concentrations (100–300 mg/L). The pH at point of zero charge (pH_PZC) of the adsorbent was determined by the titration method and a value of 3.9 was obtained. A FTIR of the adsorbent was done before and after the adsorption to find the potential adsorption sites for interaction with methylene blue molecules. The results showed that the total adsorbed quantities and equilibrium uptake decreased with increasing flow rate and increased with increasing initial MB concentration. The longest breakthrough time and maximum MB adsorption were obtained at pH 10. The results showed that the column performed well at low flow rate. Also, breakthrough time and exhaustion time increased with increasing bed depth. The bed-depth service time (BDST) model and the Thomas model were applied to the adsorption of MB at different bed depths, flow rates, influent concentrations and pH to predict the breakthrough curves and to determine the characteristic parameters of the column that are useful for process design. The two model predictions were in very good agreement with the experimental results at all the process parameters studied indicating that they were very suitable for JLP column design.     

Using GIS tools to detect the land use/land cover changes during forty years in Lodhran District of Pakistan

Environmental Science and Pollution Research - Land use/land cover (LULC) change has serious implications for environment as LULC is directly related to land degradation over a period of time and...