A comparative study on the raw chitin and chitosan yields of common bio-waste from Philippine seafood

Environmental Science and Pollution Research - Bio-waste materials from aquatic species are alternative sources of chitin and chitosan—high-value natural biodegradable and biocompatible...     

Seasonal changes in burrow geometry of the common mole rat (Rodentia: Bathyergidae)

Sociality in mole rats has been suggested to have evolved as a response to the widely dispersed food resources and the limited burrowing opportunities that result from sporadic rainfall events. In the most arid regions, individual foraging efficiency is reduced, and energetic constraints increase. In this study, we investigate seasonal differences in burrow architecture of the social Cryptomys hottentotus hottentotus in a mesic region. We describe burrow geometry in response to seasonal weather conditions for two seasons (wet and dry). Interactions occurred between seasons and colony size for the size of the burrow systems, but not the shape of the burrow systems. The fractal dimension values of the burrow systems did not differ between seasons. Thus, the burrow complexity was dependent upon the number of mole rats present in the social group.     

Risks of sea level rise to disadvantaged communities in the United States

Climate change and sea level rise (SLR) pose risks to coastal communities around the world, but societal understanding of the distributional and equity implications of SLR impacts and adaptation actions remains limited. Here, we apply a new analytic tool to identify geographic areas in the contiguous United States that may be more likely to experience disproportionate impacts of SLR, and to determine if and where socially vulnerable populations would bear disproportionate costs of adaptation. We use the Social Vulnerability Index (SoVI) to identify socially vulnerable coastal communities, and combine this with output from a SLR coastal property model that evaluates threats of inundation and the economic efficiency of adaptation approaches to respond to those threats. Results show that under the mid-SLR scenario (66.9 cm by 2100), approximately 1,630,000 people are potentially affected by SLR. Of these, 332,000 (～20%) are among the most socially vulnerable. The analysis also finds that areas of higher social vulnerability are much more likely to be abandoned than protected in response to SLR. This finding is particularly true in the Gulf region of the United States, where over 99% of the most socially vulnerable people live in areas unlikely to be protected from inundation, in stark contrast to the least socially vulnerable group, where only 8% live in areas unlikely to be protected. Our results demonstrate the importance of considering the equity and environmental justice implications of SLR in climate change policy analysis and coastal adaptation planning.     

Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.     

3D numerical investigation of thermally assisted high efficiency ductile machining of nanocrystalline hydroxyapatite

This study investigates the effects of four different variables (initial workpiece temperature, side rake angle, edge radius/feed rate, and nose radius/depth of cut) on ductile regime machining of a bioceramic material known as nanohydroxyapatite (nano-HAP) using 3D numerical simulation. AdvantEdge FEM Version 5.9 is used to conduct turning simulations of the nano-HAP workpiece. Tecplot 360 is used to analyze the results of the simulations. Because the workpiece is thin, the entire workpiece is set to a uniform initial temperature to simulate laser preheating of the material. Initial workpiece temperature, rake angle (side rake angle), edge radius, and nose radius are varied, and the effects of these operating conditions on critical feed are investigated. It is found that critical feed increases as initial workpiece temperature increases, and also as negativity of rake angle increases. For the edge radius, it is concluded that an initial increase causes an increase in critical feed – however, at some value of edge radius, critical feed shows no further increase; for the nose radius, critical feed appears to show no significant dependence.     

Study of vehicle speeds on a major highway in Ghana: implication for monitoring and control

OBJECTIVE: Vehicular speeds have been identified to be at the core of road accident severity and frequency globally. Whereas speed control is a fundamental priority and the cornerstone of road safety in the developed world, the subject is at rudimentary stages in most developing countries thus making research into vehicle speeds in developing nations imperative. The main aim of the study was to establish two major speed parameters, namely the mean speed and dispersion, and their implications for more extensive and long-term speed monitoring in Ghana. METHODS: Research workers stationed themselves in a parked car and used a radar gun to unobtrusively measure the travelling speeds of 4,163 vehicles over two 24-hour periods at two separate sites on one of the main inter-urban roads (Accra-Kumasi). Both sites were settled areas with posted speed limits of 50 km/hr. RESULTS: Over 95% of vehicles travelled above the posted speed limit of 50 km/hr. Vehicles on an average travelled at 87 km/hr, (95% CI=87, 88). Variation in speeds was wide, with a standard deviation of 18 km/hr for all classes of vehicles, and with a range of 40 to 187 km/hr. The highest vehicular speed was associated with the private car (97.6+/-18.3 km/hr) followed by large buses (93.6+/-13.3 km/hr) and the least was with heavy trucks (73.8+/-12.9 km/hr). CONCLUSION: The excessive vehicular speeds coupled with the wide speed variations explain in part the high incidence of traffic crashes and fatalities on the Accra-Kumasi highway. An integrated speed monitoring and control program, and realigning the highway to by-pass small and medium settlements would be required as a long-term measure for the reduction of speed-related road traffic crashes, fatalities, and injuries in Ghana.     

Nuptial coloration of red shiners (<Emphasis Type="Italic">Cyprinella lutrensis</Emphasis>) is more intense in turbid habitats

Communication is shaped and constrained by the signaling environment. In aquatic habitats, turbidity can reduce both the quantity and quality of ambient light and has been implicated in the breakdown of visual signaling. Here, we examined the relationship between turbidity (quantified with long-term data) and the expression of carotenoid-based nuptial coloration in the red shiner (Cyprinella lutrensis), a small-bodied cyprinid. Males in more turbid habitats displayed redder fins, and an experimental manipulation of adult diet suggested that carotenoid intake alone did not explain among-population color differences. These results run counter to similar studies where signal expression decreased in turbid conditions, and may be explained by the non-territorial red shiner mating system, interactions between the mechanism of coloration and the signaling environment, or reduced cost of color expression in turbid habitats (e.g., reduced predation risk). Our results highlight how the behavioral and ecological contexts in which signals function can shape evolutionary responses to the environment.     

Anatomical localization and stereoisomeric composition of <Emphasis Type="Italic">Tribolium castaneum</Emphasis> aggregation pheromones

We report that the abdominal epidermis and associated tissues are the predominant sources of male-produced pheromones in the red flour beetle, Tribolium castaneum and, for the first time, describe the stereoisomeric composition of the natural blend of isomers of the aggregation pheromone 4,8-dimethyldecanal (DMD) in this important pest species. Quantitative analyses via gas chromatography–mass spectrometry showed that the average amount of DMD released daily by single feeding males of T. castaneum was 878 ± 72 ng (SE). Analysis of different body parts identified the abdominal epidermis as the major source of aggregation pheromone; the thorax was a minor source, while no DMD was detectable in the head. No internal organs or obvious male-specific glands were associated with pheromone deposition. Complete separation of all four stereoisomers of DMD was achieved following oxidation to the corresponding acid, derivatization with (1R, 2R)- and (1S, 2S)-2-(anthracene-2,3-dicarboximido)cyclohexanol to diastereomeric esters, and their separation on reversed-phase high-performance liquid chromatography at −54°C. Analysis of the hexane eluate from Porapak-Q-collected volatiles from feeding males revealed the presence of all four isomers (4R,8R)/(4R,8S)/(4S,8R)/(4S,8S) at a ratio of approximately 4:4:1:1. A walking orientation bioassay in a wind tunnel with various blends of the four synthetic isomers further indicated that the attractive potency of the reconstituted natural blend of 4:4:1:1 was equivalent to that of the natural pheromone and greater than that of the 1:1 blend of (4R,8R)/(4R,8S) used in commercial lures.