Rates and processes affecting As speciation and mobility in lake sediments during aging

Sediments from an arsenic(As) contaminated groundwater vent site were used to investigate As( Ⅲ) binding, transformation and redistribution in native and iron oxide amended lake sediments using aging spiked batch reactions and a sequential extraction procedure that maintains As(V) and As( Ⅲ) speciation. In the native sediments, fractionation analysis revealed that 10% of the spiked As( Ⅲ) remained intact after a 32-day aging experiment and was predominantly adsorbed to the strongly sorbed(NH_4H_2PO_4 extractable) and amorphous Fe oxide bound(H_3PO_4 extractable) fractions. Kinetic modelling of the experimental results allowed identifying the dominant reaction path for depletion of dissolved As( Ⅲ) to As( Ⅲ)absorbed on to the solid phase, followed by oxidation in the solid phase. Arsenite was initially adsorbed primarily to the easily exchangeable fraction((NH_4)_2SO_4 extractable), then rapidly transformed into As(V) and redistributed to the strongly sorbed and amorphous Fe oxide bound fractions. Oxidation of As( Ⅲ) in recalcitrant fractions was less efficient. The iron oxide amendments illustrated the controls that iron oxides can have on As( Ⅲ) binding and transformation rates. In goethite amended samples As( Ⅲ) oxidation was faster and primarily occurred in the strongly sorbed and amorphous Fe oxide bound fractions. In these samples,19.3 μg Mn was redistributed(compared to the native sediment) from the easily exchangeable and crystalline Fe oxide bound fractions to the strongly sorbed and amorphous Fe oxide bound fractions, indicating that goethite may act as a catalyst for Mn(Ⅱ) oxidation, thereby producing sorbed Mn( Ⅲ/Ⅳ ), which then appears to be involved in rapidly oxidizing As( Ⅲ).     

Mercury bioaccumulation in aquatic biota along a salinity gradient in the Saint John River estuary

Although estuaries are critical habitats for many aquatic species, the spatial trends of toxic methylmercury(MeHg) in biota from fresh to marine waters are poorly understood. Our objective was to determine if MeHg concentrations in biota changed along a salinity gradient in an estuary. Fourspine Stickleback(Apeltes quadracus), invertebrates(snails,amphipods, and chironomids), sediments, and water were collected from ten sites along the Saint John River estuary, New Brunswick, Canada in 2015 and 2016, with salinities ranging from 0.06 to 6.96. Total mercury(proxy for MeHg) was measured in whole fish and MeHg was measured in a subset of fish, pooled invertebrates, sediments, and water. Stable sulfur(δ~(34)S), carbon(δ~(13) C), and nitrogen(δ~(15)N) isotope values were measured to assess energy sources(S, C) and relative trophic level(N). There were increases in biotic δ~(13)C and δ~(34)S from fresh to more saline sites and these measures were correlated with salinity.Though aqueous MeHg was higher at the freshwater than more saline sites, only chironomid MeHg increased significantly with salinity. In the Saint John River estuary, there was little evidence that MeHg and its associated risks increased along a salinity gradient.     

IMPACT OF VARIED DATA RESOLUTION ON HYDRAULIC MODELING AND FLOODPLAIN DELINEATION1

ABSTRACT: Current data collection technologies such as light detection and ranging (LIDAR) produce dense digital terrain data that result in more accurate digital terrain models (DTMs) for engineering applications. However, such data are redundant and often cumbersome for hydrologic and hydraulic modeling purposes. Data filtering provides a means of eliminating redundant points and facilitates model preparation. This paper demonstrates the impact of varied data resolution on a case study completed for a 2.3 mi² area with mild slopes (about 001 ft/ft) along Leith Creek near Laurinburg, North Carolina. For the original data set and seven filtered data sets, filtering induced changes in elevation, area, and hydraulic radius were determined for 10 water depths at 23 cross sections. Water surface elevations resulting from HEC‐RAS (Hydrologic Engineering Center‐River Analysis System) models for each data set were then compared. A hydraulic model sensitivity analysis was also conducted to compare filtering error to error introduced by variation in flow rates and roughness values. Finally, automated floodplain delineation was performed for each filter level based on the computed hydraulic model results and the filtered LIDAR elevations. Data filtering results indicate that significant time savings are achieved throughout the modeling process and that filtering to four degrees can be performed without compromising cross‐sectional geometry, hydraulic model results, or floodplain delineation results.     

The effects of acidification on the geochemistry of Al, Cd, Pb and Hg in freshwater environments: a literature review

Acidification of freshwater environments (terrestrial, surface water, and freshwater sediment) can significantly affect the geochemistry of Al, Cd, Pb and Hg; for example, metal mobility within soils (Al, Cd), the relative distribution of dissolved metal species (Al, Cd, Pb, Hg), and the sedimentation rate of metals in standing water bodies (Cd, Pb) can be altered by acidification. In this critical review of the literature over the last decade concerned with the interaction of acidification with these four metals, we have attempted both to provide an assessment of the current state of knowledge in this field and to emphasize those areas where significant progress has been made since the possible implications of environmental acidification on metal geochemistry became widely appreciated in the late 1970s. We have also indicated those areas which we feel are most in need of further research.     

Evaluation of VOC emission measurement methods for paint spray booths

Interest in regulations to control solvent emissions from automotive painting systems is increasing, especially in ozone nonattainment areas. Therefore, an accurate measurement method for VOC emissions from paint spray booths used in the automotive industry is needed to ascertain the efficiency of the spray booth capture and the total emissions. This paper presents the results of a laboratory study evaluating potential VOC sampling and analytical methods used in estimating paint spray booth emissions, and discusses these results relative to other published data. Eight test methods were selected for evaluation. The accuracy of each sampling and analytical method was determined using test atmospheres of known concentration and composition that closely matched the actual exhaust air from paint spray booths. The solvent mixture to generate the test atmospheres contained a large proportion of polar, oxygenated hydrocarbons such as ketones and alcohols. A series of identical tests was performed for each sampling/analytical method with each test atmosphere to assess the precision of the methods. The study identified significant differences among the test methods in terms of accuracy, precision, cost, and complexity.     

Effects of building aspect ratio, diurnal heating scenario, and wind speed on reactive pollutant dispersion in urban street canyons

A photochemistry coupled computational fluid dynamics (CFD) based numerical model has been developed to model the reactive pollutant dispersion within urban street canyons, particularly integrating the interrelationship among diurnal heating scenario (solar radiation affections in nighttime, daytime, and sun-rise/set), wind speed, building aspect ratio (building-height-to-street-width), and dispersion of reactive gases, specifically nitric oxide (NO), nitrogen dioxide (NO₂) and ozone (O₃) such that a higher standard of air quality in metropolitan cities can be achieved. Validation has been done with both experimental and numerical results on flow and temperature fields in a street canyon with bottom heating, which justifies the accuracy of the current model. The model was applied to idealized street canyons of different aspect ratios from 0.5 to 8 with two different ambient wind speeds under different diurnal heating scenarios to estimate the influences of different aforementioned parameters on the chemical evolution of NO, NO₂ and O₃. Detailed analyses of vertical profiles of pollutant concentrations showed that different diurnal heating scenarios could substantially affect the reactive gases exchange between the street canyon and air aloft, followed by respective dispersion and reaction. Higher building aspect ratio and stronger ambient wind speed were revealed to be, in general, responsible for enhanced entrainment of O₃ concentrations into the street canyons along windward walls under all diurnal heating scenarios. Comparatively, particular attention can be paid on the windward wall heating and nighttime uniform surface heating scenarios.     

Effects of introducing threatened falcons into vineyards on abundance of passeriformes and bird damage to grapes

Agricultural landscapes are becoming an important focus of animal conservation, although initiatives to conserve predators to date have rarely provided economic benefits to agricultural producers. We examined whether introduction to vineyards of the New Zealand Falcon (Falco novaeseelandiae), a species listed as threatened by the New Zealand Department of Conservation, affected the abundance of 4 species of Passeriformes that are considered vineyard pests or affected the amount of economic loss due to grape (Vitis vinifera) damage. Three of the species were introduced and remove whole grapes from bunches (Blackbird [Turdus merula], Song Thrush [Turdus philomelos], and Starling [Sturnus vulgaris]), whereas the one native species (Silvereye [Zosterops lateralis]) pecks holes in grapes. The introduction of falcons to vineyards was associated with a significant decrease in the abundance of introduced passerines and with a 95% reduction in the number of grapes removed relative to vineyards without falcons. Falcon presence was not associated with a change in the number of Silvereyes, but there was a 55% reduction in the number of grapes pecked in vineyards with falcons. Our results indicate that, relative to damage in vineyards without falcons, the presence of a falcon could potentially result in savings of US$234/ha for the Sauvignon Blanc variety of grapes and $326/ha for Pinot Noir variety of grapes.     

Variation in responses of late-seral herbs to disturbance and environmental stress

Clonal herbs that attain maximum development in late-seral forest are often assumed to have similar responses to disturbance and to be functionally equivalent. However, little is known about the demographic or physiological responses of these plants to disturbance or to the altered conditions of the post-disturbance environment. Following harvest of a mature coniferous forest, we compared abundance, demographic changes, and physiological acclimation of three clonal herbs (Asarum caudatum, Clintonia uniflora, and Pyrola picta) that differ in belowground morphology and leaf longevity. We measured ramet density, leaf area, and demographic variables (survival, clonal growth, flowering, and seedling establishment) before and for two years after harvest, and in adjacent undisturbed forest. Acclimation to increased solar radiation was assessed two years after harvest by measuring leaf mass per unit area (LMA) and chlorophyll a:b ratios of leaves produced in the current year. Although initial declines in abundance were similar, demographic responses indicate that patterns of recovery varied greatly among species. Two years after logging, ramet survival and clonal growth (production of new ramets) of Clintonia were greater in the harvest area than in the forest. Asarum had lower survival in the harvest area, but greater clonal growth, and Pyrola showed no difference in either survival or growth between environments. Only Asarum produced seedlings, although their survival was low in the harvest area. All species had higher LMA in the harvest area, but only Clintonia (with annual leaves) had a higher chlorophyll a:b ratio, suggesting the greatest potential for acclimation to increased light. Our results demonstrate that forest herbs with greater rhizome plasticity and shorter leaf duration have greater potential to acclimate after disturbance than those with rigid architectures and persistent leaves. Thus, species with comparable successional roles can vary substantially in their demographic and physiological responses to disturbance, with potential consequences for long-term recovery.     

Sustainability of the dimension stone industry in Zimbabwe—challenges and opportunities

The rapid expansion of the dimension stone and black granite industry in Zimbabwe in the 1990s, a result of increasing domestic and international demand for black granite, has ushered in new challenges and opportunities for producers and beneficiaries alike. This article investigates the social, environmental and economic challenges emanating from the export boom, the economic opportunities presented by the expanding market and the potential role the robust industry could play in regional economic development and poverty alleviation. The article evaluates the long-term sustainability of the dimension stone industry and recommends the reinvestment of revenues into diversification of the regional economic base, upgrading of local infrastructure, further processing of rough stone before export and encouragement of micro-businesses to enhance sustainability. The author argues for modification of economic incentives to incorporate environmental and social objectives in order to enhance sustainability. The need for a holistic approach to policies affecting the exploitation, processing and marketing of granite resources and their products is recognized. More research on the operations of the industry is called for.     

Control of Biofouling: Lessons Learned From a Decade of Carbon Injection System Operation and Maintenance

Over the past decade, we have learned a number of critical lessons surrounding carbon substrate handling while operating and maintaining hundreds of enhanced in situ biological remedies. The same qualities that make these substrates effective can also cause biofouling of the mixing system, piping infrastructure, and remediation wells. Managing biofouling is a key piece of a successful remedy and requires a unique set of design principles. Small decreases in injection rates can have considerable impacts to life‐cycle costs and performance caused by decreased substrate distribution and longer injection time frames, resulting in the need for system cleaning, well rehabilitation, and even well replacement. Biofouling can impair performance in any size system, but effects are often magnified by large injection volumes and extended time frames. Design should be considered in all stages of the anaerobic enhanced in situ bioremediation life cycle, particularly related to reagent mixing, storage, and residence time within the system. By understanding the fundamental mechanisms of biofouling, practitioners can make operational adjustments to enhance remedy performance by considering potential biofouling controls in the design; balancing site‐specific strategy and diagnostics; and proactively adjusting and fine tuning control/prevention technology and methodology. Ultimately, a combination of chemical and physical methods may be required to operate a carbon handling system over the long term; however, the operational costs can be greatly reduced and delivery efficiency increased if these methods are understood during the design phase. © 2013 Wiley Periodicals, Inc.