Structure and fate of a Pseudomonas aeruginosa population originating from a combined sewer and colonizing a wastewater treatment lagoon

The efficacy of a wastewater treatment lagoon (WWTL) at preventing the spread of Pseudomonas aeruginosa into natural aquatic habitats was investigated. A WWTL and its connected combined sewer and brook were exhaustively sampled. Physico-chemical analyses showed a stratification of the first pond according to pH, temperature and oxygen content. The P. aeruginosa counts partially matched this stratification with higher values among the bottom anaerobic waters of the first half of this pond. Genotyping of 494 WWTL P. aeruginosa strains was performed and led to the definition of 85 lineages. Dominant lineages were observed, with some being found all over the WWTL including the connected brook. IS5 was used as an indicator of genomic changes, and 1 to 12 elements were detected among 16 % of the strains. IS-driven lasR (genetic regulator) disruptions were detected among nine strains that were not part of the dominant lineages. These insertional mutants did not show significant elastase activities but showed better growth than the PAO1 reference strain in WWTL waters. Differences in growth patterns were related to a better survival of these mutants at an alkaline pH and a better ability at using some C-sources such as alanine. The opportunistic colonization of a WWTL by P. aeruginosa can involve several metabolic strategies which appeared lineage specific. Some clones appeared more successful than others at disseminating from a combined sewer toward the overflow of a WWTL.     

The toxicity of composted sediments from Mediterranean ports evaluated by several bioassays

This work investigates the ecotoxicological evaluation of contaminated dredged sediments from French Mediterranean navy harbour (A), commercial port (B) and two composite specimens (C) and (D) coming from the mixture of A and B with other port sediments. The toxicity of elutriates from these sediments is estimated using embryo-toxicity test, Microtox® solid phase test, LuminoTox, phytotoxicity tests and genotoxicity test. Bioassay responses are not clearly correlated with chemical contamination in the whole sediment and vary as a function of tested organisms. The highest contaminated samples (A and C) are almost always more toxic than the less contaminated samples (B and D). Among composite sediments, the mixture effect with other sediments is not efficient to decrease toxicity in sample C, suggesting that other parameters influence toxicity level such as particle size or organic matter content. These parameters should be taken into consideration in order to improve the efficiency of the mixture process and produce composite sediments with low toxicity.     

Non-biological inhibition-based sensing (NIBS) demonstrated for the detection of toxic arsenic compounds

This work demonstrates the success of a recently developed technique in chemical amplification, non-biological inhibition-based sensing (NIBS), for the detection of toxic arsenic compounds. Screening for toxic arsenic compounds is especially important due to their prevalence in wastewater and water sources. The detection method presented in this work amplifies the chemical response of toxic arsenic compounds by developing a sensor chemistry where the analyte inhibits, rather than enhances, the rate of a catalytic reaction. This technique mimics the work done with enzyme inhibition; however, using non-biological molecules allows for selective detection without the shelf-life issue associated with biological molecules. Using NIBS we find that we can enhance the sensitivity of the system by two orders of magnitude with no apparent loss in selectivity. This work demonstrates the versatility of NIBS, showing that the technique can be of general use for the detection of toxic compounds.     

Existential threat and compliance with pro-environmental norms

Recent research on the effects of personal threat suggests that perceived threat might enhance pro-environmental behavior when pro-environmental norms are in focus. In three experiments we found support for the latter assumption, showing that mortality salience and salience of pro-environmental norms interacted in predicting pro-environmental attitudes and information search (Study 1), sustainable behavior in a forest management game (Study 2), as well as pro-environmental intentions and behavior (Study 3). Specifically, mortality salience increased pro-environmental conduct only when pro-environmental norms were salient. Moreover, norm salience only had an effect on pro-environmental attitudes and behavior when the threat of personal mortality was salient. We discuss the implications of these results for both terror management theory and the promotion of pro-environmental behaviors.     

TRLFS characterization of Eu(III)-doped synthetic organo-hectorite

Europium(III) was coprecipitated with the clay mineral hectorite, a magnesian smectite, following a multi-step synthesis procedure. Different Eu(III) species associated with the proceeding synthetic hectorite were characterized by selectively exciting the 5D0-->7F0 transition at low temperature (T < 20 K). Fluorescence decay times indicated that Eu(III) ions may be incorporated in the octahedral layer of the brucite precursor as well as in the octahedral sheet of the clay mineral. The excitation spectra indicated that the substitution of the divalent Mg by the trivalent Eu induced local structural deformation. This investigation implements the molecular-level understanding of the f element structural incorporation into the octahedral layer of sheet silicates by coprecipitation with clay minerals from salt solutions at 100 degrees C.     

Thermal degradation of 2-chlorophenol promoted by CuCl2 or CuCl: formation and destruction of PCDD/Fs

The oxidative degradation of 2-chlorophenol in air (equivalence ratio phi=0.8) was investigated at 350 degrees C by using the sealed tube technique under different conditions: in the gas phase and in the presence of copper chlorides (CuCl2 and CuCl in different proportions). Not only PCDD/Fs but carbon oxides and other organic products such as chlorophenols, chlorobenzenes, tetrachloroethylene and tetrachlorocyclopentenedione were quantified in order to evaluate the relative importance of reaction pathways. Additional experiments were performed to analyse the degradation products of octachlorodibenzodioxin and 2-monochlorodibenzodioxin. Although it was stated that chlorobenzenes could be formation precursors for PCDD/Fs, experimental data obtained in this work show that chlorobenzenes can also be degradation products of PCDD/Fs.     

Assessment of nitrate pollution in the Grand Morin aquifers (France): combined use of geostatistics and physically based modeling

The objective of this work is to combine several approaches to better understand nitrate fate in the Grand Morin aquifers (2700 km(2)), part of the Seine basin. cawaqs results from the coupling of the hydrogeological model newsam with the hydrodynamic and biogeochemical model of river ProSe. cawaqs is coupled with the agronomic model Stics in order to simulate nitrate migration in basins. First, kriging provides a satisfactory representation of aquifer nitrate contamination from local observations, to set initial conditions for the physically based model. Then associated confidence intervals, derived from data using geostatistics, are used to validate cawaqs results. Results and evaluation obtained from the combination of these approaches are given (period 1977-1988). Then cawaqs is used to simulate nitrate fate for a 20-year period (1977-1996). The mean nitrate concentrations increase in aquifers is 0.09 mgN L(-1)yr(-1), resulting from an average infiltration flux of 3500 kgN.km(-2)yr(-1).     

Laboratory scale tests for the assessment of solid explosive blast effects. Part I: Free-field test campaign

The definition of blast loads applying on a complex geometry structure is still nowadays a hard task when numerical simulations are used, essentially because of the different scales involved: as a matter of fact, modelling the detonation of a charge and its resulting load on a structure requires to model the charge itself, the structure and air surrounding, which rapidly leads to large size models on which parametrical studies become unaffordable. So, on the basis of the Crank–Hopkinson’s law, an experimental set-up has been developed to support reduced scale structures as well as reduced scale detonating solid charges. As a final objective, the set-up must be used to produce the entry data for numerical assessments of the structure resistance.This set-up is composed of a modular table, sensors and targets and has been designed to conduct non-destructive studies. In the context of security, the general aim is to study the effects of detonation shock waves in the vicinity of facility buildings and to test various shock wave mitigation means that could be implemented for the protection of facilities in sensitive locations. Especially, the set-up offers the possibility to measure the loading in terms of pressure-time curves, even for very complex situations like multiple reflections, combination and diffraction.The present paper summarizes the development of the set-up as well as the first tests performed. The main features of the table, the instrumentation and the pyrotechnics are given. Also the paper summarizes a first qualification tests campaign that has been conducted. In this campaign, free-field blast tests (i.e. blast tests performed without structures) have been conducted. Overpressure maxima, arrival time of the shock wave and impulse are presented as non-dimensional characteristics of the pressure-time history. The results obtained have been found in good agreement with reference curves available from the open literature and numerical model results.     

Analysis of polycyclic aromatic hydrocarbons in wastewater treatment plant effluents using hollow fibre liquid-phase microextraction

A simple and efficient method for the enrichment of low molecular weight polycyclic aromatic hydrocarbons (PAHs) in effluents originating from wastewater treatment plants is presented here. The proposed protocol couples the recently introduced hollow fibre liquid-phase microextraction (LPME) method with gas chromatography-mass spectrometry. Method parameters were controlled and the optimised experimental conditions were: 5 ml aqueous samples, containing 2.5% NaCl w/v, stirred at 1000 rpm, extracted with toluene for 15 min. The developed protocol yielded a linear calibration curve in the concentration range from 0.5 to 50 microg l(-1) for all target analytes (namely acenaphthene, phenanthrene, fluoranthene and pyrene) and limits of detection in the low microg l(-1) level (0.005-0.011 microg l(-1)). The repeatability and inter-day precision of the method varied between 2.7% and 11.3% and 7.9% and 14.4% respectively. The relative recoveries from different types of natural water samples revealed that matrix had a small effect on the hollow fibre LPME process. The developed method was then applied for the determination of PAHs contamination in effluent samples taken from two major municipal wastewater treatment plants. The results were compared with those obtained with solid-phase microextraction. The ability of both microextraction methods to concentrate organic analytes was demonstrated as both methods confirmed the presence of PAHs as well as of phthalates in the examined effluent samples.