Correction to: Documenting lemming population change in the Arctic: Can we detect trends?

Ambio - In the original published article, some of the symbols in figure 1A were modified incorrectly during the typesetting and publication process. The correct version of the figure is provided...     

Effect of individual parameter changes on the outcome of the estimated short-term dietary exposure to pesticides

ABSTRACT

In 2015 a scientific workshop was held in Geneva, where updating the International Estimate of Short-Term Intake (IESTI) equations was suggested. This paper studies the effects of the proposed changes in residue inputs, large portions, variability factors and unit weights on the overall short-term dietary exposure estimate. Depending on the IESTI case equation, a median increase in estimated overall exposure by a factor of 1.0-6.8 was observed when the current IESTI equations are replaced by the proposed IESTI equations. The highest increase in the estimated exposure arises from the replacement of the median residue (STMR) by the maximum residue limit (MRL) for bulked and blended commodities (case 3 equations). The change in large portion parameter does not have a significant impact on the estimated exposure. The use of large portions derived from the general population covering all age groups and bodyweights should be avoided when large portions are not expressed on an individual bodyweight basis. Replacement of the highest residue (HR) by the MRL and removal of the unit weight each increase the estimated exposure for small-, medium- and large-sized commodities (case 1, case 2a or case 2b equations). However, within the EU framework lowering of the variability factor from 7 or 5 to 3 counterbalances the effect of changes in other parameters, resulting in an estimated overall exposure change for the EU situation of a factor of 0.87-1.7 and 0.6-1.4 for IESTI case 2a and case 2b equations, respectively.     

Chemical and biological characteristics of streams in the Owabi watershed

In this investigation, concentrations of physico-chemical and bacteriological qualities of water samples from the major streams within the Owabi watershed in Kumasi, Ghana, were measured at five different locations. The streams were moderately soft and neutral, having a mean pH range of 7.08 ± 0.2 to 7.88 ± 0.6. Total dissolved solids, total suspended solids, grease and oil, alkalinity, and the major ion levels varied significantly at each sampling site. Nutrient levels were however low and did not show any clear variation at sample locations. The bacteriological quality of the water was poor, rendering it unsafe for domestic purposes without treatment. The poor bacteriological quality was due to direct contamination by animal and human wastes. The streams have an appreciable self-purification capacity which is stressed by persistent pollution overloads caused by expanding human activities within the catchment. Cluster analysis performed on the data to determine pollution patterns between the streams depicts that River Owabi was less polluted, Rivers Akyeampomene and Sukobri were moderately polluted, while River Pumpunase was highly polluted.     

Geochemical and solute transport modelling for CO2 storage, what to expect from it?

Geochemistry plays an important role when assessing the impact of CO₂ storage. Due to the potential corrosive character of CO₂, it might affect the chemical and physical properties of the wells, the reservoir and its surroundings and increase the environmental and financial risk of CO₂ storage projects in deep geological structures. An overview of geochemical and solute transport modelling for CO₂ storage purposes is given, its data requirements and gaps are highlighted, and its progress over the last 10 years is discussed. Four different application domains are identified: long-term integrity modelling, injectivity modelling, well integrity modelling and experimental modelling and their current state of the art is discussed. One of the major gaps remaining is the lack of basic thermodynamical and kinetic data at relevant temperature and pressure conditions for each of these four application domains. Real challenges are the coupled solute transport and geomechanical modelling, the modelling of impurities in the CO₂ stream and pore-scale modelling applications.     

Definition Procedures Have Little Effect on Performance of Environmental Classifications of Streams and Rivers

Mapped environmental classifications are defined using various procedures, but there has been little evaluation of the differences in their ability to discriminate variation in independent ecological characteristics. We tested the performance of environmental classifications of the streams and rivers of France that had been defined from the same environmental data using geographic regionalization and numerical classification of individual river valley segments. Test data comprised invertebrate assemblages, water chemistry, and hydrological indexes obtained from sites throughout France. Classification performance was measured by analysis of similarity (ANOSIM). Geometric regions defined by a regular grid and without regard to environmental variables and a posteriori classifications based on clustering the test datasets defined lower and upper bounds of performance for a given number of classes. Differences in classification performances were generally small. The ANOSIM statistics for the a posteriori classifications were around twice that of all environmental classifications, including geometrically defined regions. The hydro-ecoregions performed slightly better for the invertebrate data and the network classification performed slightly better for the chemistry and hydrological data. Our results indicate that environmental classifications that are defined using different procedures can be comparable in terms of their ability to discriminate variation of ecological characteristics and that alleged differences in performance arising from different classification procedures can be small relative to unexplained variation. We conclude that definition procedures might have little effect on the performance of large-scale environmental classifications and decisions over which procedures to use should be based primarily on pragmatic considerations.     

Polycyclic aromatic hydrocarbon transport processes on the scale of a flood event in the rural watershed of Le Bebec, France

Transport processes of polycyclic aromatic hydrocarbons (PAHs) were investigated in a rural watershed in France, which led to new quantitative results on the scale of a flood event. For that purpose, principal components analysis (PCA) combined with signal decomposition of PAH Breakthrough curves were used. The results obtained by PCA enabled us to distinguish (i) the transport of low molecular weight PAHs in dissolved form and (ii) the transport of high molecular weight PAHs in particulate form. The intermediate molecular weight PAHs are distributed in these two clusters. The application of a signal decomposition method confirms the results of PCA and makes it possible to quantify the mass PAH resulting, respectively, from resuspension (13.3mg, i.e. 77% of the total mass) and from direct transfer (2.8mg=16% of the total mass). For the resuspension phase, desorption of PAH (38% of the total exported mass) could be also distinguished from sediment resuspension (39%).     

Comprehensive primary particulate organic characterization of vehicular exhaust emissions in France

A study to characterize primary particulate matter (PM_2.5 and PM₁₀) from the French vehicular fleet was conducted during winter 2008, in a tunnel in Marseille, France. The carbonaceous fraction represents 70% of the aerosol mass and elemental carbon fraction (EC) represent 60% of the carbonaceous fraction. The organic carbon OC was characterized in term of its water soluble fraction, functionalization rate and HULIS content. Seventy trace organic compounds including alkanes, polycyclic aromatic hydrocarbons (PAH), petroleum biomarkers and carboxylic acids were also quantified, in order to determine an organic emission profile for chemical mass balance modeling studies. Such source profiles were still missing in Europe and particularly in France. The profile obtained in this study is consistent with profiles determined in tunnel or dynamometer studies performed in other countries during the last ten years. These results suggest that organic compounds profiles from vehicular exhaust emissions are not significantly influenced by the geographic area and are thus suitable for use in aerosol source apportionment modeling applied across extensive regions. The chemical profile determined here is very similar to those obtained for diesel emissions with high concentrations of EC relative to OC (EC/OC = 1.8) and low concentrations of the higher molecular weight PAH. These results are consistent with the high proportion of diesel vehicles in the French fleet (49%).     

Sequential treatment via Trametes versicolor and UV/TiO2/Ru(x)Se(y) to reduce contaminants in waste water resulting from the bleaching process during paper production

An efficient sequential, biological and photocatalytic treatment to reduce the pollutant levels in wastewater due to the bleaching process during paper production is reported. For a biological pre-treatment, 800 ml of non-sterilized effluent was inoculated with Trametes versicolor immobilized in polyurethane foam, with 25 g l(-1) glucose, 6.75 mM CuSO(4), and 0.22 mM MnSO(4) added, and cultured at 25 degrees C with an air flow of 800 ml min(-1) for 8d. The fungus did not inhibit growth of the heterotropic populations of the effluent. After 4d of culture, the chemical oxygen demand (COD) reduction and colour removal (CR) were 82% and 80%, respectively, with laccase (LAC) and manganese peroxidase (MnP) activities of 345 U l(-1) and 78 U l(-1), respectively. The COD reduction and CR correlated positively (p<0.0001) with LAC and MnP activities. Chlorophenol removal was 99% of pentachlorophenol, 99% of 2,3,4,6-tetrachlorophenol (2,3,4,6-TCP), 98% of 3,4-dichlorophenol (3,4-DCP) and 77% of 4-chlorophenol (4-CP), while 2,4,5-trichlorophenol (2,4,5-TCP) increased to 0.2 mg l(-1). The pre-treated effluent was then exposed to a photocatalytic treatment. The treatment with photolysis resulted in 9% CR and 46% COD reduction, 42% CR and 60% COD reduction by photocatalysis, and 62% CR and 85% COD reduction by heterogeneous photocatalysis with the system TiO(2)/Ru(x)Se(y) (Fig. 4). With this treatment the bacterial and fungal populations also decreased by 5 logarithmic units with respect to the biological treatment alone (Fig. 5). The total sequential treatment resulted in a 92% CR (from 5800 UC), 97% COD reduction (from 59 g l(-1)) and 99% chlorophenol removal at 96 h and 20 min.