污水厂污泥堆肥及制作化肥技术研究与应用

利用污水处理厂脱水后的污泥，经粉煤灰水分调节后进人动态堆肥装置，好氧发酵成为性状良好的腐殖颗粒，然后经过一定工艺制成一种有机-无机复合化肥，其N、P、K含量达到25％，有机质含量大于30％，含水量小于10％，pH值6～8。将化肥用在农田的水稻种植，水稻的亩产量增产11．4％，各项指标均符合国家标准。     

污水厂污泥堆肥及制作化肥技术研究与应用

利用污水处理厂脱水后的污泥,经粉煤灰水分调节后进入动态堆肥装置,好氧发酵成为性状良好的腐殖颗粒,然后经过一定工艺制成一种有机-无机复合化肥,其N、P、K含量达到25%,有机质含量大于30%,含水量小于10%,pH值6～8.将化肥用在农田的水稻种植,水稻的亩产量增产11.4%,各项指标均符合国家标准.     

不确定性校正对地震危险性分析结果的影响

对现行地震危险性分析模型中的不确定性校正方法所涉及到的一些问题进行了讨论．以地震烈度的危险性分析为例,说明危险性曲线的衰减系数及不确定性大小是影响校正结果的主要因素．总的趋势是：对低烈度,校正后危险性有所降低,降低幅度达50％以上;对高烈度,校正后危险性有所提高,提高幅度可达数倍以上。     

天津市煤气管网的震害预测及可靠性分析

本文研究了地下管道系统的震害预测及网络系统可靠性分析的方法。它是以地下管道微观破坏机制为根据,以模糊图论为主要计算工具的计算方法。最后,本文给出了天津市煤气管网系统的应用实例,结果表明,本方法有一定的推广应用价值。     

Photosynthetic characteristics and reproductive strategies of Polygonum viviparum at different altitudes in the Qilian Mountains北大核心CSCD

Polygonum viviparum, which reproduces sexually and asexually, is widely distributed in the Qinghai-Tibet Plateau, and its reproduction strategies are very sensitive to changes in the environment. This study aimed to elucidate the effect of altitude on the photosynthetic characteristics and reproductive strategies of P. viviparum. This study was conducted to investigate the responses of photosynthetic, vegetative, and reproductive traits of P. viviparum populations along six altitudinal gradients in the eastern part of the Qilian Mountains in China. Our results indicated that, with increasing altitude, the net photosynthetic rate of P. viviparum showed an increasing trend, reaching its maximum value (14.39 μmol m–2 s–1) at 3 700 m above sea level. The transpiration rate showed an increasing trend, followed by a decreasing trend, and the intercellular CO2 concentration did not differ significantly between altitudes. With increasing altitude, the plant height and leaf area of P. viviparum showed a downward trend, the aboveground and underground biomass decreased, and the specific leaf area initially decreased and then increased. However, the leaf greenness index showed an upward trend, and the number of stomata in the upper and lower epidermis of leaves initially increased and then decreased. With increasing altitude, the proportion of inflorescence length per plant (the ratio of inflorescence length to plant height), the proportion of bulbil length per inflorescence (the ratio of bulbil length to inflorescence height), and the proportion of the number of bulbils per inflorescence (the ratio of the number of bulbils to the total number of flowers and bulbils) showed an increasing trend. Air temperature and light intensity are the major environmental factors affecting the photosynthetic characteristics and functional traits of P. viviparum. Thus, P. viviparum is exposed to more environmental stresses and obtains less energy when altitude increases, but it adapts to the harsh alpine environment by increasing the photosynthetic capability per unit area. With increasing altitude, P. viviparum populations may be sustained by investing less energy in vegetation and more in reproduction, especially asexual reproduction. © 2022 Science Press. All rights reserved.     

Effect of loading rate on shear strength parameters of mechanically and biologically treated waste

● Mechanical behavior of MBT waste affected by loading rate was investigated. ● Shear strength ratio of MBT waste increases with an increase in loading rate. ● Cohesion is inversely related to loading rate. ● Internal friction angles are positively related to loading rate. ● MBT waste from China shows smaller range of φ. Mechanical biological treatment (MBT) technology has attracted increasing attention because it can reduce the volume of waste produced. To deal with the current trend of increasing waste, MBT practices are being adopted to address waste generated in developing urban societies. In this study, a total of 20 specimens of consolidated undrained triaxial tests were conducted on waste obtained from the Hangzhou Tianziling landfill, China, to evaluate the effect of loading rate on the shear strength parameters of MBT waste. The MBT waste samples exhibited an evident strain-hardening behavior, and no peak was observed even when the axial strain exceeded 25%. Further, the shear strength increased with an increase in the loading rate; the effect of loading rate on shear strength under a low confining pressure was greater than that under a high confining pressure. Furthermore, the shear strength parameters of MBT waste were related to the loading rate. The relationship between the cohesion, internal friction angle, and logarithm of the loading rate could be fitted to a linear relationship, which was established in this study. Finally, the ranges of shear strength parameters cohesion c and effective cohesion c ´ were determined as 1.0–8.2 kPa and 2.1–14.9 kPa, respectively; the ranges of the internal friction angle φ and effective internal friction angle φ ´ were determined as 16.2°–29° and 19.8°–43.9°, respectively. These results could be used as a valuable reference for conducting stability analyses of MBT landfills.     

The positive role of trade openness in industrial green total factor productivity—provincial evidence from China

Environmental Science and Pollution Research - The sustainable development of the economy is a key issue of global concern. Green total factor productivity (GTFP) combining economic growth with...     

Light-induced variation in environmentally persistent free radicals and the generation of reactive radical species in humic substances

• Light irradiation increased the concentration of free radicals on HS. • The increased spin densities on HS readily returned back to the original value. • The “unstable” free radicals induced the formation of reactive radical species. • Reactive radicals’ concentration correlated strongly with EPFRs’ concentration. Environmentally persistent free radicals (EPFRs) in humic substances play an essential role in soil geochemical processes. Light is known to induce EPFRs formation for dissolved organic matter in aquatic environments; however, the impacts of light irradiation on the variation of EPFRs in soil humic substances remain unclear. In this study, humic acid, fulvic acid, and humin were extracted from peat soil and then in situ irradiated using simulated sunlight. Electron paramagnetic resonance spectroscopy results showed that with the increasing irradiation time, the spin densities and g-factors of humic substances rapidly increased during the initial 20 min and then gradually reached a plateau. After irradiation for 2h, the maximum spin density levels were up to 1.63 × 10¹⁷, 2.06 × 10¹⁷, and 1.77 × 10¹⁷ spins/g for the humic acid, fulvic acid, and humin, respectively. And the superoxide radicals increased to 1.05 × 10¹⁴–1.46 × 10¹⁴ spins/g while the alkyl radicals increased to 0.47 × 10¹⁴–1.76 × 10¹⁴ spins/g. The light-induced EPFRs were relatively unstable and readily returned back to their original state under dark and oxic conditions. Significant positive correlations were observed between the concentrations of EPFRs and reactive radical species (R² = 0.65–0.98, p<0.05), which suggested that the newly produced EPFRs contributed to the formation of reactive radical species. Our findings indicate that under the irradiation humic substances are likely to be more toxic and reactive in soil due to the formation of EPFRs.     

调质对垃圾焚烧飞灰烧结处理的影响

为提高经磷酸预处理后的焚烧飞灰在烧结处理过程中的烧结体机械强度,研究了添加SiO2或粉煤灰进行调质,其添加比例对烧结温度和烧结体性能的影响。同时进一步研究了利用硼酸钠作为助熔剂对焚烧飞灰烧结试验影响。结果表明,在烧结温度为1 150℃时,添加30%或者更低比例的SiO₂,或添加20%比例的粉煤灰,焚烧飞灰烧结体已经具有足够的抗压强度和致密化程度。添加5%的硼酸钠时,坯体烧结温度在1 050℃,而添加10%的硼酸钠时烧结温度可降低至980℃。     

An optimal model and its application for the management of municipal solid waste from regional small cities in China

Based on the basic characteristics of municipal solid waste (MSW) from regional small cities in China, some optimal management principles have been put forward: regional optimization, long-term optimization, and integrated treatment/disposal optimization. According to these principles, an optimal MSW management model for regional small cities is developed and provides a useful method to manage MSW from regional small cities. A case study application of the optimal model is described and shows that the optimal management scenarios in the controlling region can be gained, adequately validating and accounting for the advantages of the optimal model.