A feasibility study on production of concrete blocks using treated municipal solid waste leachate

Environmental Science and Pollution Research - Increased water demand due to population growth and industrialization has led to increased water consumption. Hence, it is required to find an...     

Using artificial intelligence to make sustainable development decisions considering VUCA: a systematic literature review and bibliometric analysis

Environmental Science and Pollution Research - Sustainable development emergent subfields have been rapidly evolving, and their popularity increased in recent years. Sustainable development is a...     

Integrating Geographic Information System network analysis and nighttime light satellite imagery to optimize landfill regionalization on a regional level

More than half of financial resources allocated for municipal solid waste management are typically spent on waste collection and transportation. An optimized landfill siting and waste collection system can save fuel costs, reduce collection truck emissions, and provide higher accessibility with lower traffic impacts. In this study, a data-driven analytical framework is developed to optimize population coverage by landfills using network analysis and satellite imagery. Two scenarios, SC1 and SC2, with different truck travel times were used to simulate generation-site–disposal-site distances in three Canadian provinces. Under status quo conditions, Landfill Regionalization Index (LFRI) ranging from 0 to 2 population centers per landfill in all three jurisdictions. LFRI consistently improved after optimization, with average LFRI ranging from 1.3 to 2.0 population centers per landfill. Lower average truck travel times and better coverage of the population centers are generally observed in the optimized systems. The proposed analytical method is found effective in improving landfill regionalization. Under SC1 and SC2, LFRI percentages of improvement ranging from 58.3% to 64.5% and 22.7% to 59.4%, respectively. Separation distance between the generation and disposal sites and truck capacity appear not a decisive factor in the optimization process. The proposed optimization framework is generally applicable to regions with different geographical and demographical attributes, and is particularly applicable in rural regions with sparsely located population centers.

     

Synthesis of vinasse-dolomite nanocomposite biochar via a novel developed functionalization method to recover phosphate as a potential fertilizer substitute

• Nanocomposites were prepared by adding dolomite to vinasse at different ratio. • Textural and morphological features of adsorbents were studied in detail. • CCD based RSM was used for investigation of P ion removal by nanocomposite. • The q_m based on Langmuir model for modified vinasse biochar was 178.57 mg/g. • P loaded nanocomposite improved plant growth and could be utilized as P-fertilizer. The effectiveness of phosphate (P) removal from aqueous solutions was investigated by novel low-cost biochars synthesized from vinasse and functionalized with calcined dolomite. The vinasse-derived biochar, synthesized via pyrolysis at different temperatures, showed easy preparation and a large surface area. The novel vinasse biochar nanocomposites were prepared by adding dolomite to the vinasse biochars with different weight percentages (10, 20 and 30%). The characteristics of the prepared materials were identified for further understanding of the inherent adsorption mechanism between P ions and vinasse biochars. Vinasse-dolomite nanocomposite was very effective in the adsorption of P species from aqueous media. The effect of the operational factors on Vinasse-dolomite nanocomposite was explored by applying response surface methodology (RSM). According to RSM results, the optimum condition was achieved to be contact time 90 (min), 250 (mg/L) of P concentration and pH 7. Thermodynamic isotherm and kinetic studies were applied on experimental data to understand the adsorption behavior. The Vinasse-dolomite nanocomposite revealed preferential P species adsorption in the presence of co-existing anions. The P species could be recovered by 1.0 M HCl where the efficiency was not affected up to the fifth cycle. The P-loaded Vinasse-dolomite nanocomposite was successfully tested on a plant; it significantly improved its growth and proved its potency as a P-based fertilizer substitute.     

Assessment of metals in fourteen species of vegetables and crops cultivated in a suburban area using multivariate analyses

Concentrations of seven metals (Cd, Cr, Mn, Ni, Pb, V, and Zn) were determined in 14 plant species including vegetables and crops from an agricultural area located at the Southern part of the Iranian capital, near the Tehran oil refinery. Different statistical methods, especially multivariate ones, were employed for the analysis of the results. Based on the results of agglomerative hierarchical method for clustering of the grid cells, some similarities between the dendrograms of Pb, Ni, and V and, furthermore, between Mn and Cr were observed that could be attributed to their similar distribution sources in the study area. The principal component analysis showed that with respect to accumulation of all the metals in the plant species, two main groups could be identified. The highest mean concentrations of all metals (except for Pb) were found in onions. In all plants the mean concentrations of Cd and Pb were considerably higher than limits stated in international guidelines for human consumption. The levels of the metals in onions exceeded these limits. Moreover, the Cr concentrations in mint and basil and the Zn concentrations in tarragon and parsley were higher than the established limits.     

Cement‐based solidification/stabilization of phenol‐contaminated soil by bentonite and organophilic clay

The performance of ordinary and organophilic clays in the solidification and stabilization process was investigated with respect to the unconfined compressive strength (UCS) and leaching of phenol‐contaminated soil. The samples contained 2,000 mg/kg of phenol. White cement (15 and 30 percent by weight [wt%]) was used as binder, while ordinary and organophilic clays (8, 15, and 30 wt%) were applied as additives for reducing the harmful effects of phenol interference in cement hydration with a 28‐day curing time. The results revealed that the UCS is reduced by increasing the amount of clays. The values of UCS of all samples met the minimum standards specified for disposal in sanitary landfills determined by developed countries. The leaching test demonstrated that the degree of leaching diminished with increased clay content in all samples of both clay types. This reduction was observed to be greater in samples containing organophilic clay than in bentonite clay samples. Furthermore, the best composition of the materials tested was determined to be 30 wt% white cement plus 13.3 wt% organophilic clay with a compressive strength of 3,839 kPa, phenol removal percentage of 80 percent, and a cost of $67 per ton of contaminated soil.     

Association of selenium,arsenic, and other trace elements in drinking water and urine in residents of the plateau region in China

Environmental Science and Pollution Research - Drinking water is considered to be an important exposure pathway for humans to ingest trace elements; human urine samples are widely accepted...     

Mechanisms and pathogenesis underlying environmental chemical-induced necroptosis

Environmental Science and Pollution Research - Necroptosis is a regulated cell death that is governed by mixed lineage kinase domain-like, receptor-interacting serine-threonine kinase 3 and...     

Trace elements accumulation in edible tissues of five sturgeon species from the Caspian Sea

This study is focused on twenty trace elements (Ag, Ba, Bi, Cd, Co, Cr, Cs, Cu, Ga, In, Mn, Mo, Pb, Rb, Sb, Sn, Sr, Ti, V, Zn) accumulation in muscles of five sturgeon species (Acipenser guldenstaedti, A. persicus, A. nudiventris, A. stellatus and Huso huso) from the southern part of the Caspian Sea. Moreover the relationships between some biological characteristics and the levels of the selected elements as well as inter-elemental relationships were assessed. The samples (10 specimens for each the five species) were collected from two important sturgeon fishery zones located in the Iranian part of the Sea in 2002. Concentrations of the elements were determined using ICPMS. Only in the case of Cs could significant differences between two selected sampling areas be detected. There were significant differences in levels of Co, Ga, Rb, Sn, Ti, Pb and Bi in muscles of the species. Only in the case of Cd weight related differences among the species were found. The significant length dependent relationships were observed for Ga and Ba. Patterns of elements accumulation were assessed by statistical methods and compared to the other researches. In all the cases, the amounts of toxic trace elements (Cd, Cu, Pb and Zn) were markedly below the international guidelines for human consumption.     

Assessment of trace elements in the shell layers and soft tissues of the pearl oyster Pinctada radiata using multivariate analyses: a potential proxy for temporal and spatial variations of trace elements

Concentrations of trace elements (Cd, Cu, Ni, Pb, V, and Zn) were determined in the soft tissues (adductor muscle and gills) of the pearl oyster Pinctada radiata and surficial sediments from two sampling sites located in the northern part of the Persian Gulf by Graphite Furnace Atomic Absorption Spectrophotometer (GFAAS). Moreover, the levels of Li, Mg, Al, Mn, Fe, Cu, Sr, Ba, Pb, and Zn were measured in two shell layers (prismatic and nacreous) using Laser Ablation Inductively Coupled Plasma Mass Spectrometer (LA-ICP-MS). There were significant differences between the sampling sites with regard to mean concentrations of Cu, Mn, and Al in the prismatic layers of the shells. But in terms of the soft tissues, only in the case of Ni accumulation in the muscle significant differences between the sites could be observed. No significant differences could be found between the sites from the elements concentrations in the sediments point of view. The levels of Cd, Cu, Ni, and Zn in the gills were markedly higher than those in the muscle. Concentrations of Mn, Mg, Li, and Cu in the prismatic layer were significantly higher than in the nacreous but the reverse case could be found for Sr. The patterns of metal occurrence in the selected tissues, shell layers, and sediments exhibited the following descending order: Zn, Ni?>?Cd, Cu?>?V, and Pb and Zn, Ni, Cd?>?Cu, V, and Pb for muscle and gills, respectively; Zn?>?Cu, Ni, Pb, Cd, and V for sediments; Mg?>?Sr, Mn, Li, Al, Fe, Ba, Cu, Pb, and Zn for the prismatic layer; and Sr, Mg?>?Mn, Al, Fe, Li, Ba, Cu, Pb, and Zn for the nacreous layer. In most cases, the temporal variations of the elements levels in the prismatic layer were clearer than those in the nacreous layer (especially for Li, Mg, Mn, Pb, and Fe). Comparison of the gained data from this study with the other relevant researches shows that in most cases the levels of the elements in this investigation either fell within the range for other world areas or were lower. Generally, it can be concluded that the shell (especially prismatic layer) of P. radiata can be considered as a suitable proxy for temporal and spatial variations of the trace elements (and probably some environmental parameters) in the study area.