提高污水汽提装置液氨质量的研究

介绍了含硫污水汽提装置为提高净化水合格率及液氨质量对工艺和设备采取的一系列改造措施     

汕头港湾附近水域潮流特征和污染物扩散的数值计算 Ⅰ汕头港湾附近水域潮流特征及数值模拟

汕头港湾附近水域的潮流特征，由于拦沙堤的建成及港池附近河道变窄而发生了一些变化。本文在取得现场实测资料的基础上，采用沿深度平均的二维浅水潮波方程，对该水体的潮流场进行了数值模拟计算，重现出潮流场在一个潮周期中的变化过程，分析潮流对污染扩散的作用。     

国产防锈水对威斯塔大鼠致癌性研究

对使用国产防锈水(主要成分为亚硝酸钠和三乙醇胺)的一个工厂进行肿瘤流行病学调查,发现该厂人员恶性肿瘤发病率略有增加。经长期给大白鼠饮用防锈水实验证明,该法可导致大鼠胰腺腺泡增生和不典型增生并能诱发出对照动物所没有的胰腺癌,同时还可引起胃粘膜的增生和胃乳头状瘤。     

利用GPRS无线传输，实现我省环境监测传输系统

我省环境监测的远程数据传输也应用多年，但目前普遍存在着设备老化、传输手段落后、设备运行不稳定等状况，急需对现有系统进行换代或改造。通过对目前常用的数据传输方式的比较分析，采用GPRS传输方案实现我省环境监测数据远程传输系统是最优的，是斜学的、可行的。     

Preparation of rare-earth metal complex oxide catalysts for catalytic wet air oxidation

Catalytic wet air oxidation (CWAO) is one of the most promising technologies for pollution abatement. Developing catalysts with high activity and stability is crucial for the application of the CWAO process. The Mn/Ce complex oxide catalysts for CWAO of high concentration phenol-containing wastewater were prepared by coprecipitation. The catalyst preparation conditions were optimized by using an orthogonal layout method and single-factor experimental analysis. The Mn/Ce serial catalysts were characterized by Brunauer-Emmett-Teller (BET) analysis and the metal cation leaching was measured by inductively coupled plasma torch-atomic emission spectrometry (ICP-AES). The results show that the catalysts have high catalytic activities even at a low temperature (80°C) and low oxygen partial pressure (0.5 MPa) in a batch reactor. The metallic ion leaching is comparatively low (Mn<6.577 mg/L and Ce<0.6910 mg/L, respectively) in the CWAO process. The phenol, COD_Cr, and TOC removal efficiencies in the solution exceed 98.5% using the optimal catalyst (named CSP). The new catalyst would have a promising application in CWAO treatment of high concentration organic wastewater. Translated from Techniques and Equipment for Environmental Pollution Control, 2005, 6(2): 40–44 [译自: 环境污染治理技术与设备]     

纳米技术在环境保护中的应用

介绍了纳米技术在环境保护领域中的应用现状、存在问题和今后的研究方向。纳米光催化剂、纳米过滤技术和纳米级的水处理剂在水处理中有着广泛的应用;纳米级的汽车尾气净化催化剂和其它纳米催化剂在大气污染控制方面有着普通材料无法比拟的优势;纳米技术在噪声污染控制和环境监测等方面也有广泛的应用。但是,纳米技术同时也存在光催化时光利用率低、催化效率低、纳米功能材料工作条件要求高等问题。     

Assessment of China's economic loss resulting from the degradation of agricultural land in the end of 20th century

Land degradation is a consequence stemming from both natural processes and social economic activities. On the bases of analyzing general situation of agricultural land degradation in China, the monetary estimating methods such as market value method and shadow engineering method were used to quantitatively assess the economic loss resulting from land deterioration. Results showed that the economic loss in 1999 was 326.8l billion RMB Yuan, which accounted for 4.1% of GDP in the same year of China. If taking five items namely farmland conversion, soil erosion, salinization, decline in reservoir functions, and siltation in waterways and, comparing with that in 1992, the percentage of economic loss to GDP has increased by 1.5 in the only 7 years.     

气相色谱法测定汽油作业环境中MTBE含量

建立了汽油作业场所空气中MTBE的气相色谱测定方法。空气中的MTBE用注射器采集，直接进样，经大口径毛细管柱分离，氢焰离子化检测器检测，以保留时间定性，峰面积定量，并考察了MTBE与甲醇、正己烷的分离效果。     

花岗岩类岩体与金矿床成因关系的探讨

花岗岩类岩体与金矿床存在着密切的空间联系，其成因关系一直是矿床学界争论的焦点，目前传统的岩浆热液成因观点仍居统治地位。随着地质资料的积累，高温高压实验技术，尤其是金矿床同位素定年技术的进展，传统观点受到了严峻挑战。成岩成矿的时代与时差、成矿流体的来源和成矿物质的来源等确定金矿床成因类型关键因素的综合研究表明，有密切空间关系的金矿床与花岗岩类岩体之间，在多数情况下两者并无直接的成因联系，金矿床不是岩浆热液成因，而是与大气降水或建造水有关的改造成矿作用的产物。     

楔横轧模具的铣削加工及其机床设计

根据楔横轧模具孔型及其加工成形的特点,对楔横轧模具大面积大螺距楔形提出了一种简单高效的铣削加工方法,并设计制造了楔横轧轧辊模具孔型加工专用机床——SDM机床。新设计的SDM机床投资小,可以加工直径为φ620 mm～φ1000mm的轧辊模具,加工导程最大可达469 mm,加工周期短,成本低,且大大降低了工人劳动强度。