Fuel efficiency improvement of a dual-fuel engine fuelled with Honge oil methyl ester (HOME)–bioethanol and producer gas

Renewable and alternative fuels have numerous advantages compared with fossil fuels as they are renewable and biodegradable and provide food and energy security and foreign exchange savings besides addressing environmental concerns and socio-economic issues (Yaliwal et al. 2013. International Journal of Sustainable Engineering, doi:10.1080/19397038.2013.801530. Zhu et al. 2011a, Applied Thermal Engineering 31 (14–15): 2271–2278; Zhu et al. 2011b, Fuel 90: 1743-1750; Banapurmath, Tewari, and Hosmath 2008, Renewable Energy 33: 2007-2018; Banapurmath 2009, “Performance, Combustion and Emission Characteristics of a Single Cylinder Direct Injection CI Engine Operated on Dual Fuel Mode Using Honge Oil and Producer Gas.” PhD thesis, 1–195; Banapurmath et al. 2011, Waste and Biomass Valorization 2: 1–11). In this context, the main objective of the present work is to study methods of biofuel production such as Honge oil methyl ester (HOME) using a conventional transesterification process and bioethanol from the Calliandra calothyrsus shrub using a new pretreatment method known as hydrothermal explosion. Further, experimental investigations were carried out on a single-cylinder, four-stroke, direct-injection stationary diesel engine operating in a dual-fuel mode using HOME, bioethanol and producer gas combinations to determine its performance, combustion and emission characteristics. The performance of the dual-fuel engine was analyzed at optimized engine conditions. HOME-Bioethanol (BE) blends such as HOME+ 5% bioethanol (BE5), HOME+ 10% bioethanol (BE10) and HOME+ 15% bioethanol (BE15) were prepared by adding bioethanol to HOME (on volume basis) in different proportions ranging from 5 to 15% with an increment of 5%. In this present work, the effect of different BE blends on the performance of producer gas fuelled dual fuel engine was studied. Experimental investigation on dual fuel engine using BE5-Producer gas operation resulted in up to 4–9% increased brake thermal efficiency with decreased hydrocarbon (HC), carbon monoxide (CO) and marginally increased nitric oxide (NOx) emission levels compared to HOME-Producer gas, BE10-producer gas and BE15-producer gas mode of operation. However, it was observed that, the overall performance of BE-producer gas operation was found to be lower compared to diesel-producer gas operation.     

The use of nanovermiculite catalyst in the study of removal of the organic load and degradation of atrazine via ozone process in RPB reactor

Abstract

The main objective of this study is the degradation of a synthetic solution of atrazine by a modified vermiculite catalyzed ozonation, in a rotating packed bed (RPB) reactor. A 0.5?L RPB reactor was used to perform the experiments, using a Central Composite Design (CCD) response surface to construct the quadratic model based on the factors: pH, catalyst concentration and reactor rotation frequency. The response variable was the removal of the organic load measured in terms of Chemical Oxygen Demand (COD). After the complete quadratic model was constructed through the response surface, the COD degradation process had an optimal removal of 41% under the following conditions: pH 8.0, rotation of 1150?rpm and catalyst concentration 0.66?g L^?1.     

A teratological assessment of four trihalomethanes in the rat

Four trihalomethanes were administered by gavage to Sprague-Dawley rats from day 6 to day 15 of gestation. Chloroform (Ch) was administered at levels of 100, 200 and 400 mg/kg and bromoform (Br), bromodichloromethane (BDCM) and chlorodibromomethane (CDBM) were administered at levels of 50, 100 or 200 mg/kg/day. A separate control was used for each compound. Maternal weight gain was depressed in all groups receiving Ch and at the highest dose levels of BDCM and CDBM. Ch administration caused decreased maternal hemoglobin and hematocrit values at all dose levels and also produced increased serum inorganic phosphorus and cholesterol at the highest dose. Liver enlargement was observed at all dose levels of Ch but in no other treatment groups. Evidence of a fetotoxic response was observed with Ch, CDBM and Br but not BDCM. No dose-related histopathological changes were observed in either mothers or fetuses as a result of treatment. None of the chemicals tested produced any teratogenic effects.     

Temporal and spatial variation of RNA content in nymphs of the mayfly, Stenonema femoratum (Say)

Temporal variation of RNA: weight, RNA: protein, RNA: DNA, and protein: DNA ratios in Stenonema femoratum (Say) was assessed by monitoring at the same site in a small midwestern stream over a two-year period. Variation components were estimated using a two-way mixed model analysis of variance with weight class and collection date as main effects. About 30% of the variation in RNA concentration was within-cell variation associated with differences among individuals and analytical error. Temporal variation accounted for about 50% of the total variability in RNA concentration data. RNA: weight had 11% and RNA: protein had 17% variation attributed to weight class effects indicating that these ratios were dependent on the size of the mayfly. RNA: DNA ratios were not influenced by mayfly weight, suggesting that this ratio would be the most appropriate for comparing populations based on means of mixed individual sizes. Comparison of mean RNA: DNA ratios among collection dates yielded significant increases in the ratio during late fall in two consecutive years. Spatial variations in RNA: DNA ratios of S. femoratum collected from sites of similar habitats were not significantly different. These data encourage the future development of RNA concentration as an in situ biochemical indicator of growth rate and possibly of stress related effects on growth rate.     

The effect of vinasse on the growth of Helianthus annuus and Pisum sativum: part I--The effects on some enzymes and chlorophyll and protein content

In this study, the composition of vinasse was first analysed. It was found to contain 8.43% dry matter, 3.3% total ash, 4% crude protein and 0.95% total carbohydrates; BOD load was determined as 63 g litre(-1). Subsequently, the effects of vinasse in various concentrations (1, 2.5, 5, 10, 25, 50, 75 and 100%) on the activity of cellulase and pectin methyl esterase and the chlorophyll and protein contents of Pisum sativum and Helianthus annuus were investigated. The activity of these enzymes and the protein and chlorophyll contents in potted plants showed a gradual increase from the control up to 2.5% concentration of vinasse, but decreased at higher concentrations. These different effects of the effluent may be due to the high BOD load and the presence of cell wall cations in it.     

The effect of metal catalysts on the formation of polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran precursors

The catalytic effects of copper and iron compounds were examined for their behavior in promoting formation of chlorine (Cl₂), the major chlorinating agent of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), in an environment simulating that of municipal waste fly ash. Formation of Cl₂ occurred as a result of a metal-catalyzed reaction of HCl with O₂. Catalytic activity was greatest at a temperature of approximately 400 °C, supporting a theory of de novo synthesis of PCDDs and PCDFs on fly ash particles downstream of waste combustion.     

Airborne pollutants along a roadside: assessment using snow analyses and moss bags

Vertical snow sampling and moss bag transplants were used to estimate the local inorganic and organic pollutant load deposited from traffic along a major highway in Finland. The pH and concentrations of Cl(-), NO(3)(-), SO(4)(2-), Ca(2+), Na(+) and polyaromatic hydrocarbons (PAHs) were determined from snow samples collected in winter at different sites along the highway. In summer, moss bags containing 20 g of fresh red-stemmed feather moss (Pleurozium schreberi) were transplanted at the same sites. The moss bag transplants remained exposed to roadside traffic for a period of one month following which the samples were collected and the PAH profiles and concentrations were analysed. The deposition of inorganic and organic pollutants from road traffic was observed up to 60 m from the road. The prevailing winds had a significant effect on the dispersion of pollutants. Snow appears to be a good collector of inorganic pollutants from the atmosphere and can be used to monitor local airborne pollution from road traffic. Snow packs can also be used as passive collectors of organic pollutant loads from road traffic on a local scale. To monitor organic PAH deposition from the road traffic, moss bags appeared to be better indicators compared to snow sampling. The efficiency of moss bags in accumulating PAH compounds indicate that vegetation may be an important sink for traffic pollution.     

A simplified approach to modelling underground migration of radionuclides from contaminated river sediments

Accidental releases of waste water from the first Czechoslovak nuclear power plant, A1, caused contamination of sediments of the Dudváh river, flowing into the Vah river, in Slovakia. Rather high concentrations of ¹³⁷Cs and ⁹⁰Sr (2150Bq dm⁻³ and 215Bq dm⁻³, respectively) were found in bottom sediments of a former channel of the re-engineered river body at a distance of about 250 m from a village, Siladice, with water-supply wells. In order to assess the possibility of contamination of the wells, underground migration of both radionuclides from the contaminated area was simulated using an original layered convection-diffusion model. K_d values determined in laboratory experiments were used. The analysis of the hydrological situation in the area reveals that the critical condition is a dominant horizontal groundwater flow near the water table in the direction from the Váh bank to Siladice, in the periods when the contaminated body lies under the water table. The simulation calculated under conservative conditions showed that the contamination of water-supply wells would not exceed permissible concentration limits.