Presence of Torque Teno Virus (TTV) in Tap Water in Public Schools from Southern Brazil

Torque teno virus (TTV) was surveyed in tap water collected in schools from three municipalities located in the south of Brazil. TTV genomes were found in 11.7 % (4/34) of the samples. TTV DNA was detected in 10.5 % (2/19) of the samples collected at the city of Caxias do Sul and in 25 % (2/8) of the samples from Pelotas. Those cities have a low rate of sewage treatment. All samples from Santa Cruz do Sul, which has nearly 92 % of its sewage treated, were negative. These results suggest that the amount of sewage treated may have an effect on the detection rates of TTV DNA in drinking water in a given urban area, showing a mild negative correlation (r = ?0.76), when comparing the percentage of sewage treatment to the detection of TTV genomes. The detection rate of TTV was also compared with Escherichia coli, showing a strong correlation (r = 0.97), indicating that TTV may be a suitable marker of fecal contamination.     

Influence of overlap between the laser beam tracks on surface quality in laser polishing of AISI H13 tool steel

Polishing by laser beam radiation is a novel manufacturing process to modify the initial surface topography in order to achieve a desired level of surface finish. The performance of laser polishing (LP) is determined by an optimum combination of several key process parameters. In this regard, the overlap between two successive laser beam tracks is one of the important LP process parameters, which has a significant effect over the final surface quality. In the current study, influence of overlap between the laser beam tracks on surface quality was experimentally investigated during the laser polishing of AISI H13 tool steel. Surface areas were polished by using four different overlap percentages (e.g. 80%, 90%, 95%, and 97.5%) while applying the same energy density. The improvement of surface quality was estimated through the analysis of line profiling surface roughness R_a, areal topography surface roughness S_a, and material ratio function. Also, individual components of the surface quality, e.g. waviness and roughness, and their evolution during LP were statistically analyzed using the power spectral density and the transfer functions. Finally, as an example of the best achieved LP result, flat surface area was polished using optimum set of the process parameters improving surface quality by 86.7% through the reduction of an areal topography surface roughness S_a from 1.35 μm to 0.18 μm.     

Opportunities to reduce greenhouse gas emissions from households in Nigeria

Efforts to mitigate climate threats should not exclude the household as the household is a major driver of greenhouse gas (GHG) emissions through its consumption patterns. This paper derives an emission index that could be used to estimate inventories of carbon dioxide (CO₂) emissions from kerosene combustion for lighting in Nigeria and also looks at the implications of solar pv lighting replacing kerosene lamp in Nigeria. Findings indicate that (1) average CO₂ emissions from kerosene combustion for lighting in Nigeria is about 0.06 kg per hour per lamp, which can be taken as the kerosene lamp CO₂ emission index for Nigeria. (2) about 3 × 10W_p solar pv will be required to replace a kerosene lamp, while about 0.124 tonnes of CO₂ will be avoided per lamp per year, operating at 6 h daily. At the national level, under the kerosene lamp replacement projection assumptions made, between 0.4 and 1.0 million tonnes of CO₂ will be avoided per year. The household investment required to owe a solar pv, including the capital cost of switching from kerosene lamp, is about US356, while the national capital investment outlay is between 1,138.265 and US356, while the national capital investment outlay is between 1,138.265 and US2,848 million. (3) Certified Emission Reduction (CER) units, assuming CO₂ is traded, will generate significant annual revenues on the order of 6.96 to almost US17.4 million per year, while earnings from unspent household kerosene fuel could amount to between 2,520 and US17.4 million per year, while earnings from unspent household kerosene fuel could amount to between 2,520 and US6,300 million over the life span of the solar pv. The micro-economic assessment carried out indicates the non-attractiveness of solar pv use at the household level, and (4) to promote solar pv use, both long and short term policy measures that aim at cost reduction were suggested. The paper concludes that, factoring the suggested measures into the climate, energy, and financial policy decision discourse in Nigeria could empower the households to play a significant role in achieving global CO₂ emission reduction, but at the local level.     

Prompting safety-belt use in the context of a belt-use law: the flash-for life revisited

PROBLEM: Safety-belt use reduces motor vehicle crash-related morbidity and mortality, yet an estimated 18% of drivers do not consistently buckle up (NHTSA, 2005). In 1985, Geller and colleagues developed an interpersonal Flash-for-Life prompt that increased belt use among 22% of 1,087 unbuckled drivers (Geller, Bruff, & Nimmer, 1985). METHOD: The Flash-for-Life intervention was re-introduced at a large university with high safety-belt use (i.e., 80%). College students stood at parking-lot entrance/exits and "flashed" signs with the message, "Please Buckle Up, I Care" to unbuckled drivers. RESULTS: Of 427 unbuckled drivers observed, 30% of these complied with the prompt. Male drivers were significantly more likely to comply with prompts delivered by females. DISCUSSION: Compliance was higher than in the 1985 study, indicating a high baseline rate of safety-belt use does not negate potential beneficial influence of a prompting intervention. This intervention is particularly effective with college-aged males, a sub-group of the driving population least likely to buckle-up. IMPACT ON INDUSTRY: A simple behavioral prompt could be used at most industrial complexes to increase safety-belt use among vehicle occupants who are not buckled-up.     

Parasitoid-induced mortality of Araneus omnicolor (Araneae, Araneidae) by Hymenoepimecis sp. (Hymenoptera, Ichneumonidae) in southeastern Brazil

All species included in the Polysphincta genus-group develop as ectophagous parasitoids of active spiders, killing their hosts prior to pupation. However, little information regarding natural history and ovipositing behavior of most species are available. In this study we inspected 85 webs of Araneus omnicolor to evaluate the frequency of parasitism and host size preferences of the wasp Hymenoepimecis sp. We also described the web characteristics of normal and parasitized spiders and the wasp ovipositing behavior. About 41% of the adult females of A. omnicolor inspected were parasitized. The highest incidence of parasitism was observed among relatively small females while no egg or larva was found in large individuals. Araneus omnicolor builds a strong web composed of an orb and barrier threads, where the spider rests within a curled leaf. The parasitoid larva builds its cocoon within this refuge, and modified cocoon webs were not observed. The ovipositing behavior of Hymenoepimecis sp. was very similar to that of Hymenoepimecis argyraphaga parasitizing Leucauge argyra, including the position of the sting, the killing of a previously attached larva, and the expelling of the egg from the base of the ovipositor.     

A new THOR shoulder design: a comparison with volunteers, the Hybrid III, and THOR NT

OBJECTIVE: Since the shoulders are rarely seriously injured in frontal or oblique collisions, they have been given low priority in the development of frontal impact crash test dummies. The shoulder complex geometry and its kinematics are of vital importance for the overall dummy kinematics. The shoulder complex also influences the risk of the safety belt slipping off the shoulder in oblique forward collisions. The first aim of this study was to develop a new 50th percentile male THOR shoulder design, while the second was to compare the new shoulder, mounted on a THOR NT dummy, with volunteer, THOR NT, and Hybrid III range of motion and stiffness data. The third aim was to test the repeatability of the new shoulder during dynamic testing and to see how the design behaves with respect to belt slippage in a 45 degrees far-side collision. METHODS: The new 50th percentile THOR shoulder design was developed with the aid of a shell model of the seated University of Michigan Transportation Research Institute (UMTRI) 50th percentile male with coordinates for joints and bony landmarks (Schneider et al., 1983). The new shoulder design has human-like bony landmarks for the acromion and coracoid processes. The clavicle curvature and length are also made similar to that of a male human, as is the range of motion in the anterior-posterior, superior-inferior, and medial-lateral directions. The new shoulder design was manufactured and tested under the same conditions that T?rnvall et al. (2005b) used to compare the shoulder range of motion for the volunteers, Hybrid III, and THOR Alpha. The new design was also tested in two dynamic test configurations: the first was a 0 degrees full-frontal test and the second was a 45 degrees far-side test. The dummy tests were conducted with an R-16 seat with a three-point belt, the Delta V was 27.0+/-0.5 km/h and the maximum peak acceleration was approximately 14.6+/-0.5 g for each test. RESULTS: A new shoulder design with geometry close to that of humans was developed to be retrofitted to the THOR NT dummy. The results showed that the range of motion for the new shoulder complex during static loading was larger by at least a factor of three, for the maximum load (200 N/arm), than that of either the Hybrid III or the THOR NT; this means it was more similar to the volunteers' range of motion. It was observed that the THOR NT with the new shoulder did not slide out of the shoulder belt during a far-side collision. The performance of the new shoulder was reasonably repeatable and stable during both the static tests and the sled tests. CONCLUSION: A new shoulder for the THOR NT has been designed and developed, and data from static range of motion tests and sled tests indicate that the new shoulder complex has the potential to function in a more human-like manner on the THOR dummy.     

Impact on sward composition and stock performance of grazing Molinia-dominant grassland

A comparative experiment was conducted to test the extent to which grazing of rank Molinia caerulea-dominated grassland increases botanical diversity and improves animal performance. The study was carried out on an area of under-grazed Molinia-dominant pasture that had not been stocked for 20 years. Three treatments were compared from 2001 until 2008: (1) no grazing, (2) grazing by Welsh Mountain sheep and (3) grazing by Welsh Black heifers. Patterns of change in sward surface composition across the grazing season were consistent with greater consumption of Molinia by the cattle, but there was little evidence of management regime influencing changes in sward composition year-on-year. There was a significant effect of year on animal performance (P < 0.001). Although the growth rates of the heifers improved over the course of the first three years of the experiment, this performance was not sustained. In contrast, any weight changes for the sheep were positive. The results highlight the slow pace of change within upland swards, and the need to develop site-specific grazing guidelines.     

Evidence of rich microbial communities in the subsoil of a boreal acid sulphate soil conducive to greenhouse gas emissions

The largest areas of acid sulphate (AS) soils in Europe are located in Finland, where 67,000–130,000 ha of AS soils are in agricultural use. In addition to their acidifying effects on waters, AS soils might be a significant source of greenhouse gases. In this pilot research, carbon and nitrogen content and microbial activity were studied in an AS and a non-AS soil. Large carbon and nitrogen stocks (110 Mg C_org ha^?1 and 15 Mg N_tot ha^?1) as well as high substrate induced respiration (33 μg CO₂–C g^?1h^?1) were found in the C horizons of the AS soil but not in the non-AS soil. High microbial activity in these horizons of the AS soil was further confirmed by the measurement of dehydrogenase activity, basal respiration, the numbers of culturable bacterial cells, and the ratio of culturable to total numbers of cells. Still, the denitrifying enzyme activity was very low in the anaerobic horizons of the AS soil, indicating the prevalence of microbes other than denitrifiers. We suspect that the microbial community originated with the genesis of AS soil and has been supported by the large stocks of accumulated carbon and mineral nitrogen in the C horizons. If these permanently water-saturated subsoils are exposed to oxygen and their microbial activity consequently increases, large carbon and nitrogen stocks are likely to be mobilised, resulting in increased emission of greenhouse gases. Additional studies of boreal AS soils are needed to assess their potential contribution to increases in greenhouse gas fluxes at the local, regional, and global scales.     

Spatial and temporal variations in groundwater nitrate at an intensive dairy farm in south-east Ireland: Insights from stable isotope data

Achievement of at least “good ecological status” in all waterbodies under the EU Water Framework Directive by 2015 will in some cases be a challenge. The twin challenge is to manage expectations of policy makers for such waterbodies as to a realistic length of time required for improvement in water quality. Hence, understanding the source, transformation processes and residence time of nitrate in a hydrological system is an essential part of meeting such challenges. On a dairy farm with 24 shallow groundwater wells, the dual isotopic composition of nitrate (δ¹⁵N and δ¹⁸O) was used to clarify nitrate sources, to assess spatial and temporal variability in nitrate concentrations and to determine if and where denitrification was occurring. Vertical travel time was estimated to correlate nitrate concentrations with management practices. Organically derived nitrogen was the predominant source contributing to groundwater nitrate concentrations. Denitrification was identified as prevalent within specific regions of the study site. The distinct low temporal variability in the isotopic data suggests constancy among nitrate sources and processes over time across the study site. Vertical travel times of up to 3 years were estimated on site indicating the influence of recent management practices on nitrate concentrations. Very slow horizontal migration of groundwater (decades) indicates a legacy of older management practices. Stable isotope techniques, together with an understanding of time lag, provide an extra mechanism to test the efficacy of monitoring and mitigation programmes.     

Assays with Daphnia magna and Danio rerio as alert systems in aquatic toxicology

For the evaluation and monitoring of the water quality, a series of methodologies, which have as basis an ample variety of bioindicators, may be applied. The aim of this research was to evaluate the use of ecotoxicity assays with Daphnia magna and Danio rerio as alert systems in water contaminated with toxic substances. Using two toxicity databases, the sensibility of those aquatic organisms to a wide variety of chemical products and elements and to some chemical categories was investigated. The relation between the reference dose for human oral chronic exposure (RfD) of all chemical products and the acute toxicity values for both bioindicators was also studied. Acute toxicity tests with D. magna respond to a larger variety of chemicals with a higher sensitivity than those with D. rerio. Although mammals, crustaceans and fish have different routes of exposure, target organs and toxic mechanisms, acute toxicity essays with fish and Daphnia may be used as an initial screening before mammal models are used.