Characterization of Air Quality Problems in Five Finnish Indoor Ice Arenas

ABSTRACT

The air quality in five Finnish ice arenas with different volumes, ventilation systems, and resurfacer power sources (propane, gasoline, electric) was monitored during a usual training evening and a standardized, simulated ice hockey game. The measurements included continuous recording of carbon monoxide (CO), nitric oxide (NO), and nitrogen dioxide (NO₂) concentrations, and sampling and analysis of volatile organic compounds (VOCs). Emissions from the ice resurfacers with combustion engines caused indoor air quality problems in all ice arenas. The highest 1-hour average CO and NO₂ concentrations ranged from 20 to 33 mg/m³ (17 to 29 ppm) and 270 to 7440 µg/m³ (0.14 to 3.96 ppm), respectively. The 3-hour total VOC concentrations ranged from 150 to 1200 µg/m³. The highest CO and VOC levels were measured in the arena in which a gasoline-fueled resurfacer was used. The highest NO₂ levels were measured in small ice arenas with propane-fueled ice resurfacers and insufficient ventilation.

In these arenas, the indoor NO₂ levels were about 100 times the levels measured in ambient outdoor air, and the highest 1-hour concentrations were about 20 times the national and World Health Organization (WHO) health-based air quality guidelines. The air quality was fully acceptable only in the arena with an electric resurfacer. The present study showed that the air quality problems of indoor ice arenas may vary with the fuel type of resurfacer and the volume and ventilation of arena building. It also confirmed that there are severe air quality problems in Finnish ice arenas similar to those previously described in North America.     

Acute toxicity of the insect larvicide abate® (temephos) on the fish tilapia melanopleura and the dragonfly larvae neurocordelia virginiensis.

Abstract

Acute bioassay tests on the toxic effects of the insect larvicide Abate® (temephos) on the mouth brooder cichlid fish Tilapia melanopleum and the dragonfly larvae (Odonata) Neurocordulia virginiensis were conducted in static non renewal toxicity test set ups. The 96h‐LC50 (95% confidence intervals) was 30.2 (20.5‐ 44.20) mg/L for the fish and 2.0 (1.16–2.0) mg/L for the dragonfly larvae. The dragonfly larvae were 15 times more susceptible to the larvicide than the tilapia. The calculated NOEC (No Observable Effect Concentration) was 14.1 mg/L for the fishand less than 1.0 mg/L for the insect larvae. The estimated ‘safe’ concentration of the pesticide to the fish was 3.0 mg/L and 0.2 mg/L for insect larvae. These figures are far above the concentrations approved for use in the control of mosquito larvae(0.0004–0.01 mg/L). It appears that the application of toxic levels of the insecticide for the elimination of some aquatic invertebrates may be ‘safe’ for normal survival, growth and reproduction offish and some aquatic insect larvae.     

Characterization of Emissions from Vehicles Using Methanol and Methanol-Gasoline Blended Fuels

Exhaust and evaporative emissions were examined from vehicles fueled with methanol or a gasoline-methanol blend. Regulated automobile pollutants, as well as detailed hydrocarbons, methanol, and aldehydes were measured, and exhaust emission trends were obtained for vehicle operation over five different driving cycles. Results indicated that use of the blended fuel does not generally have any significant effect on base-line exhaust emission rates of regulated pollutants; however, emission rates of aldehydes increased during the Federal Test Procedure. Aldehyde emissions from the methanol-fueled car were roughly an order of magnitude higher than those resulting from blended fuel usage. The hydrocarbon composition of evaporative emissions with the blended fuel was similar to that with the base-line fuel except when canister breakthrough occurred. Evaporative emissions during breakthrough were comprised chiefly of N-butane.     

The application of the vermicomposting process in the bioremediation of diesel contaminated soils

Abstract

Polycyclic Aromatic Hydrocarbons (PAHs) are among the environmental pollutants that have very high carcinogenic and mutagenic activity. Among hundreds of different PAHs, 17 are considered priority pollutants and routinely monitored for regulatory purposes. Extended periods of exposure and expensive clean-up costs are typically associated with the vast majority of processes used for the remediation of areas contaminated with PAHs. The results of this study indicate that bioremediation via vermicomposting could be an effective method for remedying soils contaminated with toxic organic compounds, such as PAHs. This study was conducted over 90?days in the presence of various quantities of organic matter (cattle manure) to recover soils contaminated with PAHs. High-performance liquid chromatography (HPLC) was applied to identify PAHs. An evaluation of the toxicity of the final material and the transformation of the organic matter throughout the process was also conducted. The data presented here suggest a relationship between the molar mass of the PAHs and the ability of the vermicomposting process to promote biodegradation. These results suggest that vermicomposting has great potential to be utilized as a tool for the bioremediation of soils impacted by PAHs.     

Uncertainty requirements of the European Union’s Industrial Emissions Directive for monitoring sulfur dioxide emissions: Implications from a blind comparison of sulfate measurements by accredited laboratories

When annual average PM_2.5 (fine particulate matter sized 2.5 microns and less) data for 2005 became available in April 2006 and the 3-yr average PM_2.5 concentration in an area just north of the Houston Ship Channel reached 15.0 µg/m³, the Texas Commission on Environmental Quality (TCEQ) initiated daily collection of quartz fiber as well as Teflon PM_2.5 filter samples for chemical speciation analysis. The purpose of the chemical speciation analysis was to use the speciation data, together with meteorological data and hourly TEOM (tapered element oscillating microbalance) PM_2.5 mass data, to identify the causes of the high PM_2.5 concentrations affecting the monitoring site and the neighborhood. The ultimate purpose was to target emission reduction efforts to sources contributing to the high measured PM_2.5 concentrations. After a year of data collection, it was recognized that a specific source, unpaved driveways and loading areas along the Ship Channel and dirt tracked onto Clinton Drive, the main artery running east-west north of the Ship Channel, were the primary cause for the Clinton Drive site's measuring PM_2.5 concentrations significantly higher than other sites in Houston. The source characterization and remediation steps that have led to sustained reduced concentrations are described in this paper.

Implications: With PM_2.5 exceedances it can be essential to have or develop chemical speciation data as part of the process of identifying the source types causing exceedances of an annual standard. Positive matrix factorization (PMF) analysis proved to be a powerful tool that identified the two locally emitted species contributing to exceedances, which did not occur at other sites in the region. They were calcium sulfate (gypsum), an industrial by-product, and soil minerals. Other data analysis approaches were necessary to distinguish North African dust events, which PMF failed to identify.     

Significance of Atmospheric Ozone as a Phytotoxicant

Since the recognition of ozone as a major phytotoxicant in crop plants in 1957, ozone type symptoms have been observed in a wide range of vegetation. These observations include leafy vegetables, field, forage, and textile crops, also shrubs, broad-leafed ornamental, fruit and forest trees, and various conifers. Fumigation experiments at various institutions have confirmed the etiological relation of ozone in many of these observations. Such visible injuries fail to provide a reliable index to the damaging impact of ozone on the numerous plants affected. Hidden injury or damage by ozone at sub-necrotic levels has been reported and experimentally established in a number of crop plants. Evidence is available which indicats that citrus varieties are so affected, and that much of the citrus decline in Southern California may be ozone induced. Photochemically induced ozone may prove to be the most persistent, if not the most difficult, of atmospheric phytotoxicants to control. Ozone type injury has been reported from eighteen different states, and from Canada to Japan.     

Photochemical Behavior of Parathion in the Presence of Humic Acids from Different Origins

This paper reports the effect of ultraviolet radiation on the degradation of pesticide ethyl parathion in the presence of humic acids. Ethyl parathion was completely degraded in 300 min using an artificial lamp of 7.41 × 10^{? 10} einstein/s. Humic acid from peat did not influence the photochemical rate (k = 8.92 × 10^?3 min). However, in the presence of aquatic humic acid, the photochemical rate was higher (11.5 × 10^?3 min). The analytical determinations show the presence of p-nitrophenol and aminophenol in the reaction medium during the photochemical experiments. The kinetic of degradation in all experiments obeyed a first-order reaction pattern.     

Structure and diversity of Erica ciliaris and Erica tetralix heathlands at different successional stages after cutting

In NW Europe, it is known that cutting is a useful tool for managers with regard to decisions about the conservation and management of wet heathlands. Nevertheless it is rarely described quantitatively in the international literature. In Spain, knowledge about this is scarce or lacking. In this study, twenty communities were selected in Galicia (NW Spain) that would represent from one to four stages of vegetation development after cutting. Two 5?×?5?m plots were established for each stage to characterise the vegetation on the basis of its species composition, frequency values, vertical structure and linear cover features. The Diversity Shannon index was calculated and multivariate analyses were performed. As succession advanced, notable changes were produced in the cover of dominant species, Erica ciliaris and Ulex gallii in the first stages and Erica tetralix and Genista berberidea in mature ones. Also, the species richness decreased because of the reduced number of herbs species in the mature stages and, finally, the cover values are indicators of the degree of vegetation development, together with the other parameters of height, overlayering or diversity. Cutting is a useful tool for management of heathlands because the existence of vegetation units belonging to different succession stages increases the internal diversity of communities. On the other hand, the vertical and horizontal structure reflects the formidable resilience of the vegetation community to this practice. This study offers a global vision of the dynamics of wet heathlands after cutting, with very useful ecological information that can be used by the people responsible for their management.     

Influence of Sampling Frequency on Estimation of Annual Total Phosphorus and Total Suspended Solids Loads1

Abstract: The determination of sediment and nutrient loads is typically based on the collection and analysis of grab samples. The frequency and regularity of traditional sampling may not provide representation of constituent loading, particularly in systems with flashy hydrology. At two sites in the Little Bear River, Utah, continuous, high‐frequency turbidity was used with surrogate relationships to generate estimates of total phosphorus and total suspended solids concentrations, which were paired with discharge to estimate annual loads. The high frequency records were randomly subsampled to represent hourly, daily, weekly, and monthly sampling frequencies and to examine the effects of timing, and resulting annual load estimates were compared to the reference loads. Higher frequency sampling resulted in load estimates that better approximated the reference loads. The degree of bias was greater at the more hydrologically responsive site in the upper watershed, which required a higher sampling frequency than the lower watershed site to achieve the same level of accuracy in estimating the reference load. The hour of day and day of week of sampling impacted load estimation, depending on site and hydrologic conditions. The effects of sampling frequency on the determination of compliance with a water quality criterion were also examined. These techniques can be helpful in determining necessary sampling frequency to meet the objectives of a water quality monitoring program.