SPECTRAL ANALYSIS OF TIDAL FLUCTUATIONS IN GROUND WATER LEVEL1

ABSTRACT: Water level data at 16 ground water wells and two sea water gauging stations, coupled with barometric measurements in an alluvial plain in the central‐west region of Taiwan, are analyzed using spectral analysis in the time and frequency domains. The semi‐diurnal component from water level station is observed to be the most noticeable signal while the diurnal component is the less distinct signal recorded at the water level stations. Both semidiurnal and diurnal components are coupled with atmospheric pressure measurements. From the atmospheric pressure data, spectral analysis indicates that both the raw and the pressure adjusted water levels are almost in phase and retain the same amplitude in this area. It implies that the effect of pressure variations is not significant for the sea water and ground water level nearby; the astronomical tidal components, as expected, are the main factor causing fluctuation of ocean water and ground water levels in the Choshuihsi alluvial plain.     

OPTIMUM STORAGE VOLUME OF ROOFTOP RAIN WATER HARVESTING SYSTEMS FOR DOMESTIC USE1

ABSTRACT: Major parameters and optimum storage volumes of rooftop rain water harvesting systems (RRWHSs) have not been investigated in detail in Taiwan. Accordingly, the four major parameters of RRWHSs were herein identified and elucidated using a simulation method. Because the performance of the RRWHSs is sensitive to the runoff coefficient, a field experiment was conducted to determine the runoff coefficient more precisely for various types of roofs. A simulation model including production theory was developed and employed to estimate the most cost effective combination of the roof area and the storage capacity that best supplies a specific volume of water. Consequently, the expansion path of optimum solutions for different volumetric reliability of water supply can be determined. Additionally, the method based on the marginal rate of substitution can be used for determining the rational volumetric reliability. The procedures developed herein constitute an effective tool for preliminarily estimating the most satisfactory storage capacity of any specific roof area and for determining the rational reliability of a corresponding water supply.     

Conservation Implications of the Natural Loss of Lineages in Wild Mammals and Birds

Because populations in zoological parks and nature reserves often are derived from only a few individuals, conservationists have attempted to minimize founder effects by equalizing family group sizes and increasing the reproductive contributions of all individuals. Although such programs reduce potential losses of genetic diversity, information is rarely available about the actual persistence of family groups or genetic lineages in natural populations. In the absence of such data, it can be difficult to weigh the importance of human intervention in the conservation of small populations. Separate long-term studies of two mammals, the North American bison (Bison bison) and the white-nosed coati (Nasua narica), and a bird, the Acorn Woodpecker (Melanerpes formicivorus), demonstrate differential extinction of genetic lineages. Irrespective of the mechanisms affecting population structure, which may range from stochastic environmental events to such behavioral phenomena as poor intrasexual competitive abilities, our results show that lineages can be lost at rapid rates from natural populations. A survey of comparable studies from the literature indicates that the loss of matrilines over the course of the study varies from 3% to 87% in wild mammals and from 30% to 80% in birds, with several small mammals losing approximately 20% of matrilines per year of study. These lineage extinctions were not an artifact of the length of the study or the generation time of the species. Such rapid losses of lineages in less than 20-year periods in natural populations suggest that efforts to maintain maximal genetic diversity within populations may not always reflect processes that occur in the wild. Conservation biologists need to give further thought to the extent to which parity among genetic lines should be a primary goal of management of captive and small wild populations.     

Greening Nigeria's economy for industrial and environmental sustainability: Polyurethane production as a test case

The study focused on Nigeria's polyurethane (PU) production process as a test case. Though it is currently insignificant when viewed from a global perspective, PU production in Nigeria is not eco‐friendly. Traditionally, PU is produced by reacting petro‐based polyol with a poly‐isocyanate, which is made from amines and phosgene and are currently imported into the country. These two materials are detrimental to the human health and environment, indicating that Nigeria's PU industries need to re‐examine their production inputs for environmental compliance. The objective of this study is to review the PU industry for nontoxic reagents that could be sourced locally vis‐à‐vis overcoming sustainable development (greening the economy) challenges in Nigeria. Non‐isocyanate polyurethane (NIPU) is preferred to petro‐polyurethane because, in comparison, NIPU has improved thermal and chemical resistance, porosity and water absorption, and is less toxic. Engaging local resources to produce PU is economically feasible; in addition, NIPU is relatively advantageous to human health and the environment. Aside from being economically feasible, production of NIPU in Nigeria has the propensity to greatly enlarge the growth of the existing PU industry to tremendous heights and contribute to diversifying and improving the overall economy.     

Towards sustainable consumption: Predicting the impact of social‐psychological factors on energy conservation intentions in Northern Cyprus

The incessant demand and consumption of energy services among individuals’ is increasing throughout the world. Individuals’ electricity consumption in Northern Cyprus has risen considerably. However, the demand for electrical energy services on the island is heavily reliant on imported fossil fuels. Burning fossil fuels has adverse effects on its environment. Therefore, sustainable energy consumption is required and individuals are targeted for energy conservation to reduce electricity consumption. Against this background, using the Structural Equation Modeling approach, this research incorporates social‐psychological factors; personal norms, positive and negative emotions into the theory of planned behaviour (TPB) model to assess the relationships among the variables, explain their impact on consumers’ electricity conservation intentions and enhance the explanatory power of the model. Data was conveniently obtained from a quantitative sample of 400 electricity consumers. The results indicate that negative emotions have the strongest significant influence on intentions, but personal norms have the least effect on intentions to save electricity. Furthermore, the study revealed that our expanded TPB model can provide improved explanatory power more than the original TPB. Policy implications, limitations and future research are discussed.     

Thriving at work: A meta‐analysis

Thriving at work refers to a positive psychological state characterized by a joint sense of vitality and learning. On the basis of Spreitzer and colleagues' model, we present a comprehensive meta‐analysis of antecedents and outcomes of thriving at work (K = 73 independent samples, N = 21,739 employees). Results showed that thriving at work is associated with individual characteristics, such as psychological capital (r_c = .47), proactive personality (r_c = .58), positive affect (r_c = .52), and work engagement (r_c = .64). Positive associations were also found between thriving at work and relational characteristics, including supportive coworker behavior (r_c = .42), supportive leadership behavior (r_c = .44), and perceived organizational support (r_c = .63). Moreover, thriving at work is related to important employee outcomes, including health‐related outcomes such as burnout (r_c = ?.53), attitudinal outcomes such as commitment (r_c = .65), and performance‐related outcomes such as task performance (r_c = .35). The results of relative weights analyses suggest that thriving exhibits small, albeit incremental predictive validity above and beyond positive affect and work engagement, for task performance, job satisfaction, subjective health, and burnout. Overall, the findings of this meta‐analysis support Spreitzer and colleagues' model and underscore the importance of thriving in the work context.     

Practical Perspectives of 1,4‐Dioxane Investigation and Remediation

1,4‐Dioxane (dioxane) is a contaminant of emerging concern that is classified by the U.S. Environmental Protection Agency as a likely human carcinogen. Dioxane has been used as a minor or major ingredient in many applications, and is also generated as an unwanted by‐product of industrial processes associated with the manufacturing of polyethylene, nonionic surfactants, and many consumer products (cosmetics, laundry detergents, shampoos, etc.). Dioxane is also a known stabilizer of chlorinated solvents, particularly 1,1,1‐trichloroethane, and has been commonly found comingled with chlorinated solvent plumes. Dioxane plumes at chlorinated solvent sites can complicate site closure strategies, which to date have not typically focused on dioxane. Aggressive treatment technologies have greatly advanced and are clearly capable of achieving lower parts per billion cleanup criteria using ex situ advanced oxidation processes and sorption media. In situ chemical oxidation has also been demonstrated to effectively remediate dioxane and chlorinated solvents. Other in situ remedies, such as enhanced bioremediation, phytoremediation, and monitored natural attenuation, have been studied; however, their ability to achieve cleanup levels is still somewhat questionable and is limited by co‐occurring contaminants. This article summarizes and provides practical perspectives on dioxane analysis, plume stability relative to other contaminants, and the development of investigation tools and treatment technologies.