The Chemical Sensitivity Scale: Psychometric properties and comparison with the noise sensitivity scale

A questionnaire-based tool for quantifying self-reported affective reactions to and behavioral disruptions by odorous/pungent substances, called the Chemical Sensitivity Scale (CSS), analogous to the Noise Sensitivity Scale (NSS), was evaluated regarding psychometric properties. Twenty-six members from the Swedish Asthma and Allergy Association and 124 control participants responded to the CSS, the NSS, and to additional questions for evaluation of the validity of the CSS and NSS. The results showed that the CSS generates approximately normal distributions, has good test–retest reliability (r_xy=0.87), good internal consistency (r_α=0.88), and satisfying predictive and concurrent validity. These metric properties of the CSS and NSS were in general very similar. The content validity of the CSS is discussed. Two major dimensions of the CSS appear to represent sensory/somatic and neurasthenic symptoms, respectively. The analogy of the CSS to the NSS implies that use of both scales in combination may enhance understanding for the issue of general environmental sensitivity versus specific sensitivity to chemicals. Correlation coefficients between CSS and NSS scores for the asthma and allergy members (r_xy=0.40) and controls (r_xy=0.42) imply a moderate correspondence between chemical and noise sensitivity.     

Release of sex pheromone and its precursors in the pine sawfly Diprion pini (Hym., Diprionidae)

Summary. The first identification of a sex pheromone of a pine sawfly (Hymenoptera, Diprionidae) dates back almost thirty years. Since then, female-produced pheromones of over twenty diprionid species have been investigated by solvent extraction followed by separation and identification. However, no study has shown what the females actually release. Collection of airborne compounds using absorbtion on charcoal filter as well as solid phase microextraction (SPME) followed by analysis employing gas chromatography combined with mass spectrometry (GC-MS), revealed an unusual system in Diprion pini, in which the pheromone precursor alcohol, 3,7-dimethyl-2-tridecanol, is released together with acetic, propionic, butyric and isobutyric acids. The corresponding acetate, propionate and butyrate esters of 3,7-dimethyl-2-tridecanol were also found in the samples. All esters were electrophysiologically active, and the propionate and isobutyrate were attractive in trapping experiments. Based on these and earlier reported results, it seems that at least in part of its range, the pheromone response of D. pini is not very specific with regard to the functional group, as long as this is an ester.     

Exposure to anti-cancer drugs during preparation and administration. Investigations of an open and a closed system

Systems for the preparation and administration of drugs are designed to ensure that the drug is not contaminated. They do not necessarily consider the work environment for the medical staff and new techniques are therefore desirable. The aim of this work is to compare a new closed system for the preparation and administration of drugs with the traditional technique with regard to airborne emission and surface spillage of drugs. Platinum, determined using adsorptive voltammetry, was used as the tracer for airborne emission. Air samples were collected during the preparation and administration, and the collected platinum on the filters was determined by adsorptive voltammetry. For determination of spills and leakage onto surfaces the radioisotope 99m-technetium was used as a tracer. The radiation from the isotope was determined on protective gloves and bench covers after preparation and administration. The mean airborne emission was 6 ng m(-3) with the closed system and 15 ng m(-3) with the traditional pump technique. The average surface spillage using the closed technique was 0.005 microL. This is significantly smaller than with the traditional technique, which resulted in an average spillage of 64 microL. Our results also show that the dominant part of the leakage is surface spillage. Inexperienced nurses could also adequately handle the closed system.     

New approaches for assessment of occupational exposure to metals using on-site measurements

Traditional assessment of occupational exposure to metals typically involves static or personal aerosol sampling on a membrane filter followed by a laboratory determination of the metal content on the filter sample. These techniques give results with high accuracy and low detection limits. However, they all have a drawback in that, since the samples have to be analysed in a laboratory, the results will usually be obtained days or weeks after the sampling took place. Today there is available a new generation of portable electronic micro-balances and instruments for metal analysis based on X-ray fluorescence. These instruments will make on-site measurements of metal exposure possible, which opens the way for new approaches for assessment of occupational exposure to metals. In combination with high-flow pumps, short-term sampling is possible, which allows monitoring of the exposure variation during a work shift as well as the exposure during individual work tasks of short duration. Screening measurements and emission measurements are other examples of monitoring that are facilitated using on-site determinations. Measure control monitoring can effectively be performed using on-site measurements and is an effective tool in the assessment of workplace improvements. On-site determinations can also form an effective and pedagogic tool showing workers how to perform specific tasks and demonstrating the effectiveness of different measures intended to improve their work environment. Other examples are the assessment of skin exposure using aerosol deposition on pads and screening of contamination using bulk samples.     

Determination of Mancozeb in air. Occupational exposure during its use in control of potato late blight

A simple method for the determination of occupational exposure to Mancozeb (an ethylenebisdithio-carbamate) was evaluated. This method is based on filter sampling and determination of the manganese content in the samples by means of atomic absorption spectroscopy. The method shows good linearity and accuracy for determinations in the range 0.05 to 2 mg/m³. Exposure during field application of Mancozeb in potato cultivations was studied and was found, during preparation and filling of the spraying liquid, to be 0.22 mg/m³ on average (n=18). The highest individual eight-hour time-weighted average exposure was 0.05 mg/m³.     

Conflict resolution by participatory management: remote sensing and GIS as tools for communicating land-use needs for reindeer herding in northern Sweden

When seeking to resolve complex land-management issues, geographical assessment of resources that are in short supply or in dispute can aid the communication of knowledge and the understanding among and between different stakeholders. In this paper, we illustrate how remote sensing and GIS can be used to gather and compile information regarding land-use activities and patterns among reindeer herders and other land users (forestry, mining, tourism, etc) in northern Sweden. The project represents a novel user-oriented effort largely based on the work carried out by the principal end user, i.e. the reindeer herders themselves. The basis for development of land-use plans for reindeer husbandry, was the following: to collect and digitally systemize traditional ecological and landscape knowledge of reindeer habitat use; to integrate this information with results from field inventories and satellite-based vegetation classifications; to map activities of other land users. The resulting land-use plans provide information that can facilitate consultation between the reindeer herders and other stakeholders and can facilitate operational work in reindeer management. This project can serve as a model for participatory involvement and planning, bringing indigenous knowledge and advanced remote-sensing techniques together in an interactive process.     

Wipe sampling as a tool for monitoring aerosol deposition in workplaces

As a complement to traditional exposure assessment, monitoring deposition of aerosols can be a simple and quick screening method for identifying deposited aerosols. In this presentation examples of screening studies, based on wipe sampling in combination with adequate analytical techniques, are described. These screening methods are rapid, simple and easy to carry out. The examples given in this presentation show a broad applicability and the methods are proven useful for assessing aerosol distribution in the workplace as well as to identify target spots for more extensive assessment of a worker's exposure situation.     

Reply: Investor demand and spot commodity prices

In a recent article (Tilton, Humphreys, and Radetzki, 2011), Tilton et al. argue that even when investor stocks are declining an increase in investor demand can cause a commodity's price to rise. They contend that this conclusion, which is based on two hypothetical examples, is both contrary to conventional wisdom and counter-intuitive. In my comment on the article (Olle Östensson, 2011), I challenged this finding. In a reply to my article, Tilton et al. maintain that their original finding is valid: investor demand can be driving commodity prices higher even when stocks are falling. In my present reply, I contend that their argument with respect to the first example confuses the actions of a minority of investors with those of all investors and is well accommodated within the framework of traditional theory. I further argue that their second example rests on an assumption regarding investor behavior that is unproven and that in any case falls outside the framework of analysis of futures markets.     

Alternating Copolymers and Alternative Device Geometries for Organic Photovoltaics

Bathymetry, the underwater topography, is a fundamental property of oceans, seas, and lakes. As such it is important for a wide range of applications, like physical oceanography, marine geology, geophysics and biology or the administration of marine resources. The exact requirements users may have regarding bathymetric data are, however, unclear. Here, the results of a questionnaire survey and a literature review are presented, concerning the use of Baltic Sea bathymetric data in research and for societal needs. It is demonstrated that there is a great need for detailed bathymetric data. Despite the abundance of high-quality bathymetric data that are produced for safety of navigation purposes, the digital bathymetric models publicly available to date cannot satisfy this need. Our study shows that DBMs based on data collected for safety of navigation could substantially improve the base data for administrative decision making as well as the possibilities for marine research in the Baltic Sea.