Energy Supply Potentials and Needs, and the Environmental Impact of their Use in Sudan

Sudan is an agricultural country with fertile land, plenty of water resources, livestock, forestry resources, and agricultural residues. An overview of the energy situation in Sudan is introduced with reference to the end uses and regional distribution. Energy sources are divided into two main types; conventional energy (biomass, petroleum products, and electricity); and non-conventional energy (solar, wind, hydro-electricity, etc.). Sudan possesses a relatively high abundance of solar radiation, and moderate wind speeds, hydro, and biomass energy resources. The application of the new and renewable sources of energy available in Sudan is now a major issue in future energy strategic planning and for an alternative to fossil conventional energy. Sudan is an important case study in the context of renewable energy. It has a long history of meeting its energy needs through renewables. Sudan's renewables' portfolio is broad and diverse, due in part to the country's wide range of climates and landscapes. Like many of the African leaders in renewable energy utilization, Sudan has a well-defined commitment to continue research, development, and implementation of new technologies. Sustainable low-carbon energy scenarios for the new century emphasize the untapped potential of renewable resources. Rural areas of Sudan can benefit from this transition. The increased availability of reliable and efficient energy services stimulates new development alternatives. It is concluded that renewable, environmentally friendly, energy must be encouraged, promoted, invested, implemented, and demonstrated by full-scale plants, especially for use in the remote rural areas of Sudan.     

Level of heavy metals in some edible and poisonous macrofungi from Batman of South East Anatolia, Turkey

The macrofungi specimens were collected and identified from locations around Batman province of Turkey. A group of 21 macrofungi were collected from 29 different locations and analysed for the heavy metal contents. The highest Pb and Cu levels were found in Russula rubroalba while the highest Cd level was determined for the species Agaricus xanthodermus. Fe level was maximum for the species Funalia trogii; Mn for Mycena personsii; Zn level was for Morchella esculenta and Co level was for the species Agaricus xanthodermus. The lowest Cd, Cu, Mn and Zn contents were found in Inotus hispidus.     

Strength properties of concrete incorporating coal bottom ash and granulated blast furnace slag

Coal bottom ash (CBA) and fly ash (FA) are by-products of thermal power plants. Granulated blast-furnace slag (GBFS) is developed during iron production in iron and steel plants. This research was conducted to evaluate the compressive strength property and some durability characteristics of concrete incorporating FA, CBA, and GBFS. FA is used as an effective partial cement replacement; CBA and GBFS are used as partial replacement for fine aggregate without grinding. Water absorption capacity, unit weight and compressive strengths in 7, 28, and 90-day ages were assessed experimentally. For these experiments, concrete specimens were produced in the laboratory in appropriate shapes. The samples are divided into two main categories: M1, which incorporated CBA and GBFS; and M2, which incorporated FA, CBA, and GBFS. Remarkable decreases are observed in compressive strength and water absorption capacity of the concrete; bulk density of the concrete is also decreased. It can be concluded that if the content of CBA and GBFS is limited to a reasonable amount, the small decreases in strength can be accepted for low strength concrete works.     

Nitrogen-efficient rice cultivars can reduce nitrate pollution

Introduction  

Environmental pollution by un-utilized nitrogenous fertilizer at the agricultural field is one of the key issues of the day. Rice-based cropping system, the mainstay of Indian agriculture, is one of the main sources of unused N-fertilizer since rice utilizes only 30–40% of total applied N, and the rest goes to waste and creates environmental as well as economic loss.     

Atmospheric deposition of organochlorine pesticides by precipitation in a coastal area

Wet deposition fluxes of organochlorine pesticides (OCPs) were determined for rain samples collected in a coastal area of Turkey. Seventeen precipitation samples were collected over a 1-year period from 2008 to 2009. Rainwater was accumulated at the beginning of rain events using real time monitoring. Atmospheric concentrations were also measured in parallel with deposition samples. Both atmospheric concentrations and deposition fluxes were determined as particle and gas phases. The particle phase and dissolved phase deposition fluxes were 794.26?±?756.70 ngm^?2 day^?1 and 800.77?±?672.63 ngm^?2 day^?1, respectively. The washout ratios for OCP compounds were calculated separately for the particle and dissolved phases using the atmospheric concentrations and rain concentrations. The minimum washout ratio for the particle phase was 2339.47 for Endrin aldehyde, whereas the maximum washout ratio was 497593.34 for Methoxychlor. The maximum washout ratio for the dissolved phase was 247523.89 for Endosulfan beta, whereas the minimum washout ratio was 10169.69 for p,p′-DDT. The dry deposition velocities ranged from 0.01 to 1.67 cms^?1. The partitioning of wet deposition between the particle and dissolved phases was 50 % in terms of total OCP deposition.     

Development of new computational machine learning models for longitudinal dispersion coefficient determination: case study of natural streams,United States

Environmental Science and Pollution Research - Natural streams longitudinal dispersion coefficient (Kx) is an essential indicator for pollutants transport and its determination is very important....     

Statistical inference using stratified judgment post-stratified samples from finite populations

This paper develops statistical inference for population mean and total using stratified judgment post-stratified (SJPS) samples. The SJPS design selects a judgment post-stratified sample from each stratum. Hence, in addition to stratum structure, it induces additional ranking structure within stratum samples. SJPS is constructed from a finite population using either a with or without replacement sampling design. Inference is constructed under both randomization theory and a super population model. In both approaches, the paper shows that the estimators of population mean and total are unbiased. The paper also constructs unbiased estimators for the variance (mean square prediction error) of the sample mean (predictor of population mean), and develops confidence and prediction intervals for the population mean. The empirical evidence shows that the proposed estimators perform better than their competitors in the literature.     

Sources and evolution of anthropogenic lead in dated sediments from Lake Clair, Québec, Canada

Two sediments cores were collected from the deepest part of Lake Clair (Québec, Canada) to assess the historical sources of Pb additions to the lake. The cores were collected by divers by carefully inserting a Plexiglas tube into the sediments. To determine the stratigraphic ages of the sediments, (210)Pb and (137)Cs activities were counted by gamma-ray spectroscopy. Lead concentrations and isotopic ratios were performed by inductively coupled plasma-mass spectrometry (ICP-MS), following digestion of the samples with a mixture of HF, HNO(3), and HClO(4) acids and Pb separation by anion-exchange chromatography. Starting at the middle of the 19th century, Pb content of the sediments increased until 1975. The maximum Pb enrichment factor of 35 times (relative to the natural background) was found in sediments deposited in 1975. At this time, excess Pb flux was estimated to be about 0.03 g m(-2) yr(-1). Before 1872, the Pb isotopic ratios were relatively stable (mean (206)Pb/(207)Pb = 1.20 +/- 0.01), reflecting the natural Pb background. Between 1872 and 1894, the source of anthropogenic Pb was highly radiogenic as shown by the Pb isotopic signatures of the sediments (mean (206)Pb/(207)Pb = 1.22 +/- 0.01), possibly reflecting deforestation and agricultural developments in the St.-Lawrence Valley. Between 1894 and 1937, widespread use of industrial and domestic charcoals may explain the isotopic composition of Pb accumulated in the sediments (mean (206)Pb/(207)Pb = 1.19 +/- 0.01). From 1937 to 1975, Pb isotopic compositions became less radiogenic ((206)Pb/(207)Pb from 1.18 to 1.17) even though elemental Pb abundance reached extremely high values (623 mg kg(-1)). This isotopic shift reflects increased use of alkyl-lead in gasoline. For sediments accumulated between 1967 and 1996, the U.S. contribution to anthropogenic Pb accumulated in Lake Clair sediments amounted to between 30 and 63%.     

IMPACT OF VARIED DATA RESOLUTION ON HYDRAULIC MODELING AND FLOODPLAIN DELINEATION1

ABSTRACT: Current data collection technologies such as light detection and ranging (LIDAR) produce dense digital terrain data that result in more accurate digital terrain models (DTMs) for engineering applications. However, such data are redundant and often cumbersome for hydrologic and hydraulic modeling purposes. Data filtering provides a means of eliminating redundant points and facilitates model preparation. This paper demonstrates the impact of varied data resolution on a case study completed for a 2.3 mi² area with mild slopes (about 001 ft/ft) along Leith Creek near Laurinburg, North Carolina. For the original data set and seven filtered data sets, filtering induced changes in elevation, area, and hydraulic radius were determined for 10 water depths at 23 cross sections. Water surface elevations resulting from HEC‐RAS (Hydrologic Engineering Center‐River Analysis System) models for each data set were then compared. A hydraulic model sensitivity analysis was also conducted to compare filtering error to error introduced by variation in flow rates and roughness values. Finally, automated floodplain delineation was performed for each filter level based on the computed hydraulic model results and the filtered LIDAR elevations. Data filtering results indicate that significant time savings are achieved throughout the modeling process and that filtering to four degrees can be performed without compromising cross‐sectional geometry, hydraulic model results, or floodplain delineation results.     

Nickel accumulation and its effect on biomass, protein content and antioxidative enzymes in roots and leaves of watercress (Nasturtium officinale R. Br.)

In order to understand its response towards nickel stress,watercress(Nasturtium officinale R.Br.) was exposed to nickel(1-25 mg/L) for 1,3,5 and 7 days.The accumulation and translocation of nickel were determined and the influence of nickel on biomass,protein content and enzymatic antioxidants was examined for both roots and leaves.It was determined that N.officinale could accumulate appreciable amounts of Ni in both roots and leaves.Nickel accumulated particularly in the roots of plants.Biomass increased at low nickel concentrations but certain measurable change was not found at high concentrations.Under stress conditions the antioxidant enzymes were up-regulated compared to control.An increase in protein content and enzyme activities was observed at moderate exposure conditions followed by a decline at both roots and leaves.The maximum enzyme activities were observed at different exposure conditions.Our results showed that N.officinale had the capacity to overcome nickel-induced stress especially at moderate nickel exposure.Therefore,N.officinale may be used as a phytoremediator in moderately polluted aquatic ecosystems.