Economic and Spatial Impacts of an Existing Reserve Network on Future Augmentation

An optimization model for land reservation was developed that explicitly selects parcels in the most compact or contiguous manner possible while meeting habitat requirements and a budget limitation. The model was used to compare the effects of an existing reserve network on future parcel spatial locations and total cost. Using habitat and land value data from Josephine County, Oregon, it was found that a system of existing reserves created by various policies and overseen by different agencies can decrease future reserve compactness and contiguity, and increase total cost. This work suggests that coordinated planning can result in more efficient conservation efforts for less cost.     

Should foliar cadmium concentrations be expressed on a dry weight or dry ash weight basis?

Foliar analysis is a valuable tool for evaluating the pollution status of forests. However, the use of foliar diagnosis in large-scale surveys is a complicated process owing to the high variability within the crown. The method used to express foliar concentrations has often been found to diminish the variability. The effect of the method used to express element concentrations on the spatial variability of cadmium (Cd) in the leaves of crack willow (Salix fragilis L.) was investigated by sampling the leaves of one willow at 292 locations in the crown, each sampling location having a volume of 0.027 m3 (0.3 m x 0.3 m x 0.3 m). Cadmium showed a distinct spatial trend in the crown of the tree. Concentrations as low as 2.4 mg kg(-1) dry weight (DW) or 23.1 mg kg(-1) dry ash weight (DAW) were obtained in the top of the crown, and 10.6 mg kg(-1) DW or 73.0 mg kg(-1) DAW in the bottom of the crown. The lower relative standard deviation and weaker correlation with the sampling height support the use of DAW in large-scale surveys especially. The lower variability of the DAW Cd concentration makes this variable less sensitive to fluctuations caused by differences in growing conditions and sampling methodology. However, the majority of publications in this field report metal concentrations on a DW basis. Therefore, the restrictions set on the use of results expressed on a DAW basis in large-scale surveys of foliar metal concentrations have to be offset against the advantages offered by a reduction of the variability in metal concentrations.     

Chromium speciation and fractionation in ground and surface waters in the vicinity of chromite ore processing residue disposal sites

Chromium concentrations of up to 91 mg l(-1) were found by ICP-OES for ground water from nine boreholes at four landfill sites in an area of S.E. Glasgow/S. Lanarkshire where high-lime chromite ore processing residue (COPR) from a local chemical works had been deposited from 1830 to 1968. Surface water concentrations of up to 6.7 mg l(-1) in a local tributary stream fell to 0.11 mg l(-1) in the River Clyde. Two independent techniques of complexation/colorimetry and speciated isotope dilution mass spectrometry (SIDMS) showed that Cr was predominantly (>90%) in hexavalent form (CrVI) as CrO4(2-), as anticipated at the high pH (7.5-12.5) of the sites. Some differences between the implied and directly determined concentrations of dissolved CrIII, however, appeared related to the total organic carbon (TOC) content. This was most significant for the ground water from one borehole that had the highest TOC concentration of 300 mg l(-1) and at which < 3% of Cr was in the form of CrVI. Subsequent ultrafiltration produced significant decreases in Cr concentration with decreasing size fractions, e.g. <0.45 microm, < 100 kDa, <30 kDa and < 1 kDa by the tangential-flow method. As this appeared related more to concentrations of humic substances than of TOC per se, horizontal bed gel electrophoresis of freeze-dried ultrafilter retentates was carried out to further characterise the CrIII-organic complex. This showed for the main Cr-containing fraction, 100 kDa-0.45 microm, that the Cr was associated with a dark brown band characteristic of organic (humic) matter. Comparison of gel electrophoresis and FTIR results for ultrafilter retentates of ground water from this borehole with those for a borehole at another site where CrVI predominated suggested the influence of carboxylate groups, both in reducing CrVI and in forming soluble CrIII-humic complexes. The implications of this for remediation strategies (especially those based on the addition of organic matter) designed to reduce highly mobile and carcinogenic Cr(VI)O4(2-) to the much less harmful CrIII as insoluble Cr(OH)3 are discussed.     

Distribution of Chlorinated Organic Pollutants in Harbor Sediments of Livorno (Italy): A Multivariate Approach to Evaluate Dredging Sediments

Dredging is a very important procedure for harbor management. InItaly the guidelines for the offshore dumping of dredged materials are issued by the Ministry of Environment. Theydescribed a few steps of dredging activities, such as thesampling strategy, but do not deal with limits or guide-valuesfor the chemical, physical and biological composition of theresulting sediments. The quality of dredged materials is mainlydependent on the presence of inorganic and organic pollutants.In particular, polychlorinated biphenyls (PCBs) and organo-chlorinated pesticides are seen as a high priority inmarine environment by international organizations because oftheir persistence, toxicity and bioaccumulation capacity.In this article the presence of some PCBs and organo-chlorinatedpesticides in sediment samples collected from the harbor ofLivorno (Northern Tyrrhenian Sea) was investigated. Theconcentration of HCHs, Aldrin, Chlordanes, DDEs, DDTs, and PCBsin 12 representative sites ranged between <1 g kg^–1and 95, 19, 32, 35, 107, and 111 g kg^–1, respectively.The application of univariate and multivariate statisticaltechniques, such as linear regression analysis and principalcomponent analysis, to the experimental data showed a differentdistribution of PCBs in the two sediment layers. On thecontrary, the vertical distribution of the other investigatedpollutants was more homogeneous and affected by randomvariability. The multivariate approach was an important tool to establish more rational criteria for the management of dredged materials.     

Preliminary air pollution monitoring in San Miguel, Buenos Aires

Passive diffusion samplers were employed in San Miguel(Buenos Aires Metropolitan Area) for a preliminary airpollution monitoring. The highest loads were observedin downtown, compared with an urban background site.Total suspended particulate matter (TSPM) varied from0.257 to 0.033 mg cm^-2 month^-1; dust was examinedfor particle nature and size distribution. A similartrend was observed for nitrogen dioxide (NO₂) andTSPM spatial distribution, suggesting that traffic isthe major pollution source. Sulphur dioxide (SO₂)values were low and rather homogeneous. Levels for theinvestigated pollutants are below EPA's guide linevalues. Geographic (flat area, near to Rio de LaPlata) and climatologic factors (rainfalls andvariable wind directions) contribute to disperse pollutants.     

A Study on Transfer Factors of 60Co and 65Zn from Soil to Plants in the Tropical Environment of Bangladesh

Soil to plant transfer factor (TF) of⁶⁰Co and ⁶⁵Zn was determined fromradioisotope experiments on plants grown in pots underoutdoor ambient tropical conditions for three growingseasons (1995–1998). The TFs were obtained fordifferent plants/crops such as, rice, bean, peanutspineapple, cabbage, tomato, spinach and grass. Theaverage TF values of ⁶⁰Co are found to be 0.087,0.15, 0.12, 0.67, 0.28, 0.79, 1.03 and 0.34respectively for the above mentioned plants/crops. Incase of ⁶⁵Zn, the average TF values are found tobe 2.24, 1.17, 0.89, 1.09, 0.78, 1.34, 2.92 and 1.78,respectively, for the above mentioned plants/crops. Thedata will be useful to assess the radiation exposureto man associated with the releases of radionuclidesfrom nuclear facilities by means of radiologicalassessment models that require transfer factors asinput parameters to predict the contamination ofradionuclides in foodchain.     

Ambient Air Quality Monitoring Network Design for Assessing Human Health Impacts from Exposures to Airborne Contaminants

Existing methods of establishing ambientair quality monitoring networks typically evaluateonly parameters related to ambient concentrations ofthe contaminant(s) of interest such as emissionsource characteristics, atmospheric transport anddispersion, secondary reactions, depositioncharacteristics, and local topography. However,adverse health risks from exposures to airbornecontaminants are a function of the contaminant andthe anatomic and physiologic characteristics of theexposed population. Thus, ambient air qualitymonitoring networks designed for the protection ofpublic health or for epidemiological studiesevaluating adverse health impacts from exposures toambient air contaminants should account for bothcontaminant characteristics and human healthparameters. A methodology has been establishedwhich optimizes ambient air quality monitoringnetworks for assessments of adverse human healthimpacts from exposures to airborne contaminants byincorporating human health risk assessmenttechniques. The use of risk assessment techniquesas the basis for designing ambient air qualitymonitoring networks will help to target limitedfinancial and human resources to evaluate humanhealth risks from exposures to airbornecontaminants.     

Mulberry-silkworm food chain--a templet to assess heavy metal mobility in terrestrial ecosystems

Assessment of the food chain mobility of heavy metals inthe natural ecosystem receives more attention nowadays. Inthe present study, mulberry-silkworm food chain has beenfocused as a templet to assess the biomobility of heavymetals in soil-higher plant-insect hierarchy. Both in thecase of Cd and Cu treatments, higher mobility wasobserved in the level-1 (soil–root) followed by level-3(leaf–larva), level-4 (larvae–faecal) and level-2(root–leaf). Consequently, roots accumulated more amountsof Cd and Cu, with a limited transport to the leaves.Among the two metals (Cd and Cu) tested, in the plant,the transfer potential of Cd exceeds that of Cu. Whereasin the case of leaf–larval transfer, Cu precedes overCd. Accumulation of Cd and Cu in all the levels (1–4)tested showed a concentration dependent increase, except inthe level 4 (larva–faecal) of Cd treatment where adeclining trend was noticed.     

A Watershed-based Cumulative Risk Impact Analysis: Environmental Vulnerability and Impact Criteria

Swine Concentrated Animal Feeding Operations (CAFOs) have received much attention in recent years. As a result, a watershed-based screening tool, the Cumulative Risk Index Analysis (CRIA), was developed to assess the cumulative impacts of multiple CAFO facilities in a watershedsubunit. The CRIA formula calculates an index number based on: 1) the area of one or more facilities compared to the area of the watershed subunit, 2) the average of the environmental vulnerability criteria, and 3) the average of the industry-specific impact criteria. Each vulnerability or impact criterion is ranked on a 1 to 5 scale, with a low rank indicating low environmental vulnerability or impact and a high rank indicating high environmental vulnerability or impact. The individual criterion ranks, as well as the total CRIA score, can be used to focus the environmental analysis and facilitate discussions with industry, public, and other stakeholders in the Agency decision-making process.     

Data needs for occupational epidemiologic studies

Data needs in an epidemiologic study can appear to be substantial in light of the other responsibilities of an industrial hygienist. Many of the data needed for this type of investigation, however, are already collected for other exposure assessment purposes. To increase understanding of this concept, the data needs for the major purposes for conducting an exposure assessment are identified. The purposes include determining compliance; implementing industrial hygiene programs, such as personal protective and respiratory equipment, hazard communication training, and medical surveillance; investigating health complaints and worker concerns; investigating tasks or engineering control effectiveness; investigating toxic tort or worker compensation claims; and conducting epidemiologic studies. A comprehensive exposure assessment system is then described that incorporates the data needs for all these purposes, including epidemiologic studies. The data needs of epidemiologic studies and how the data are used are then described and illustrated with examples taken from published epidemiologic studies.