Study of cyanide removal from contaminated water using zinc peroxide nanomaterial

The present study highlights the potential application of zinc peroxide(ZnO_2)nanomaterial as an efficient material for the decontamination of cyanide from contaminated water. A process patent for ZnO_2 synthesis has been granted in United States of America(US Patent number 8,715,612; May 2014),South Africa,Bangladesh,and India. The ZnO_2 nanomaterial was capped with polyvinylpyrrolidone(PVP)to control the particle size. The PVP capped ZnO_2nanomaterial(PVP-ZnO_2)before and after adsorption of cyanide was characterized by scanning electron microscope,transmission electron microscope,X-ray diffractometer,Fourier transform infrared spectroscopy and time of flight-secondary ion mass spectrometry. The remaining concentration of cyanide after adsorption by PVP-ZnO_2 was determined using ion chromatograph. The adsorption of cyanide over PVP-ZnO_2 was also studied as a function of p H,adsorbent dose,time and concentration of cyanide. The maximum removal of cyanide was observed in p H range 5.8–7.8 within 15 min. The adsorption data was fitted to Langmuir and Fruendlich isotherm and it has been observed that data follows both the isotherms and also follows second order kinetics.     

Tissue distribution of perfluoroalkyl acids and health status in wild Mozambique tilapia (Oreochromis mossambicus) from Loskop Dam, Mpumalanga, South Africa

This study examined concentrations of 15 perfluoroalkyl acids (PFAAs) in tissues from male Mozambique tilapia (Oreochromis mossambicus) collected at Loskop Dam, Mpumalanga, South Africa in 2014 and 2016. Nine of the 15 PFAAs were detected frequently and were included in statistical analysis and included two of the most commonly known PFAAs, perfluorooctanesulfonic acid (PFOS) (median, 41.6 ng/g) and perfluorooctanoic acid (PFOA) (median, 0.0825 ng/g). Of the tissues measured, plasma (2016 and 2014 median, 22.2 ng/g) contained the highest PFAA burden followed by (in descending order): liver (median, 11.6 ng/g), kidney (median, 9.04 ng/g), spleen (median, 5.92 ng/g), adipose (median, 2.54 ng/g), and muscle (median, 1.11 ng/g). Loskop Dam tilapia have been affected by an inflammatory disease of the adipose tissue known as pansteatitis, so this study also aimed to investigate relationships between PFAA tissue concentrations and incidence of pansteatitis or fish health status. Results revealed that healthy tilapia exhibited an overall higher (p-value < 0.05) PFAA burden than pansteatitis-affected tilapia across all tissues. Further analysis showed that organs previously noted in the literature to contain the highest PFAA concentrations, such as kidney, liver, and plasma, were the organs driving the difference in PFAA burden between the two tilapia groups. Care must be taken in the interpretations we draw from not only the results of our study, but also other PFAA measurements made on populations (human and wildlife alike) under differing health status.     

A new fossil thryonomyid from the Late Miocene of the United Arab Emirates and the origin of African cane rats

Cane rats (Thryonomyidae) are represented today by two species inhabiting sub-Saharan Africa. Their fossil record is predominately African, but includes several Miocene species from Arabia and continental Asia that represent dispersal events from Africa. For example, Paraulacodus indicus, known from the Miocene of Pakistan, is closely related to living Thryonomys. Here we describe a new thryonomyid, Protohummus dango, gen. et sp. nov., from the late Miocene Baynunah Formation of the United Arab Emirates. The new thryonomyid is less derived than “Thryonomys” asakomae from the latest Miocene of Ethiopia and clarifies the origin of crown Thryonomys and the evolutionary transition from Paraulacodus. A phylogenetic analysis shows Protohummus dango to be morphologically intermediate between Paraulacodus spp. and extinct and living Thryonomys spp. The morphological grade and phylogenetic position of Protohummus dango further supports previous biochronological estimates of the age of the Baynunah Formation (ca. 6–8 Ma).     

Seasonal changes in burrow geometry of the common mole rat (Rodentia: Bathyergidae)

Sociality in mole rats has been suggested to have evolved as a response to the widely dispersed food resources and the limited burrowing opportunities that result from sporadic rainfall events. In the most arid regions, individual foraging efficiency is reduced, and energetic constraints increase. In this study, we investigate seasonal differences in burrow architecture of the social Cryptomys hottentotus hottentotus in a mesic region. We describe burrow geometry in response to seasonal weather conditions for two seasons (wet and dry). Interactions occurred between seasons and colony size for the size of the burrow systems, but not the shape of the burrow systems. The fractal dimension values of the burrow systems did not differ between seasons. Thus, the burrow complexity was dependent upon the number of mole rats present in the social group.     

Influence of dissolved organic matter character on mercury incorporation by planktonic organisms：An experimental study using oligotrophic water from Patagonian lakes

Ligands present in dissolved organic matter （DOM） form complexes with inorganic divalent mercury （Hg^2＋） affecting its bioavailability in pelagic food webs. This investigation addresses the influence of a natural gradient of DOM present in Patagonian lakes on the bioaccumulation of Hg^2＋ （the prevailing mercury species in the water column of these lakes） by the algae Cryptomonas erosa and the zooplankters Brachionus calyciflorus and Boeckella antiqua. Hg^2＋ accumulation was studied through laboratory experiments using natural water of four oligotrophic Patagonian lakes amended with^197Hg^2＋. The bioavailability of Hg^2＋ was affected by the concentration and character of DOM. The entrance of Hg^2＋ into pelagic food webs occurs mostly through passive and active accumulation. The incorporation of Hg^2＋ by Cryptomonas, up to 27% of the Hg^2＋ amended, was found to be rapid and dominated by passive adsorption, and was greatest when low molecular weight compounds with protein-like or small phenolic signatures prevailed in the DOM. Conversely, high molecular weight compounds with a humic or fulvic signature kept Hg^2＋ in the dissolved phase, resulting in the lowest Hg^2＋ accumulation in this algae. In Brachionus and Boeckella the direct incorporation of Hg from the aqueous phase was up to 3% of the Hg^2＋ amended. The dietary incorporation of Hg^2＋ by Boeckella exceeded the direct absorption of this metal in natural water, and was remarkably similar to the Hg^2＋ adsorbed in their prey. Overall, DOM concentration and character affected the adsorption of Hg^2＋ by algae through competitive binding, while the incorporation of Hg^2＋ into the zooplankton was dominated by trophic or dietary transfer.     

Warm forming die design,part I: Experimental validation of a novel thermal finite element modeling code

Finite element analysis (FEA) has become an invaluable tool in the design of sheet metal stamping dies and processes. FEA has gained widespread acceptance as the best method of optimizing dies for conventional stamping processes. More recently, FEA has been shown to be an effective method of designing tooling for sheet forming processes. In this work, an FEA based approach is applied to the warm stamping (warm forming) process. This work introduces a new thermal finite element analysis software called PASSAGE®/Forming (PASSAGE) that enables the up-front design of the thermal management of warm forming dies. This thermal finite element analysis software is designed to specifically handle the forming and optimization scenarios related to the heating of a stamping die while minimizing user interface time. In this work, PASSAGE has been applied to a simple block of steel embedded with cartridge heaters to validate the prediction capability of this software under two different heating conditions. The results show that PASSAGE is capable of predicting the actual steady-state temperature distribution within the block with an acceptable level of accuracy while yielding notable information to the user with respect to specifying power requirements. A finite element software package like PASSAGE is a valuable tool that will aid greatly in the implementation of warm forming as a manufacturing process beyond the scope of the laboratory and into production.     

Management strategies to mitigate the impacts of climate change on sea turtle’s terrestrial reproductive phase

Climate change poses a serious threat to sea turtles (Cheloniidae) as their terrestrial reproductive phase is only successful within a limited range of environmental and physical conditions. These conditions are likely to become less optimal as climate change progresses. To date, management and conservation of sea turtles has focused almost entirely on non-climatic stressors, due at least in part to practitioners not knowing what strategies to take and the feasibility and risks of potential strategies. To aid the management of sea turtles in a changing environment, we identified management strategies via a focus workshop and surveys to mitigate the impacts of climate change to the terrestrial reproductive phase of sea turtles. The effectiveness, ecological risks and potential social and logistical constraints associated with implementing each of the identified management strategies is discussed. Twenty management strategies were identified; strategies varied from habitat protection to more active and direct manipulation of nests and the nesting environment. Based on our results, we suggest a three-pronged approach to sea turtle conservation in light of climate change, where managers and researchers should: 1) enhance sea turtle resilience to climate change by mitigating other threats; 2) prioritise implementing the ‘no regret’ and ‘reversible’ management strategies identified here; and 3) fill the knowledge gaps identified to aid the trial and implementation of the potential strategies identified here. By combining these three approaches our collective toolkit of sea turtle management strategies will expand, giving us an array of viable approaches to implement as climate change impacts become more extreme.     

Incorporating stakeholder decision support needs into an integrated regional Earth system model

A new modeling effort exploring the opportunities, constraints, and interactions between mitigation and adaptation at regional scale is utilizing stakeholder engagement in an innovative approach to guide model development and demonstration, including uncertainty characterization, to effectively inform regional decision making. This project, the integrated Regional Earth System Model (iRESM), employs structured stakeholder interactions and literature reviews to identify the most relevant adaptation and mitigation alternatives and decision criteria for each regional application of the framework. The information is used to identify important model capabilities and to provide a focus for numerical experiments. This paper presents the stakeholder research results from the first iRESM pilot region. The pilot region includes the Great Lakes Basin in the Midwest portion of the United States as well as other contiguous states. This geographic area (14 states in total) permits cohesive modeling of hydrologic systems while also providing strong gradients in climate, demography, land cover/land use, and energy supply and demand. The results from the stakeholder research indicate that, for this region, iRESM should prioritize addressing adaptation alternatives in the water resources, urban infrastructure, and agriculture sectors, including water conservation, expanded water quality monitoring, altered reservoir releases, lowered water intakes, urban infrastructure upgrades, increased electric power reserves in urban areas, and land use management/crop selection changes. For mitigation in this region, the stakeholder research implies that iRESM should focus on policies affecting the penetration of renewable energy technologies, and the costs and effectiveness of energy efficiency, bioenergy production, wind energy, and carbon capture and sequestration.     

Time allocation between work and recreation and the associated injury risks among young people

PROBLEM: The purpose of this study was to examine the relationship between overall risk of injury and time use patterns between work and active recreation among adolescents and young adults. METHODS: Using a representative sample of 9,795 Canadians aged 15-24 years, a multivariate logistic regression on the likelihood of any medically attended injury was conducted, including sociodemographic, individual, and time factors. RESULTS: Young people who engaged in a combination of high work and high activity hours were twice as likely to sustain a medically attended injury compared to those who worked low hours, but did not participate in any recreational activity. Those respondents who were not in school had a 43% increase in injury risk compared to full-time students. SUMMARY: Our findings suggest that injury risk was not a simple function of fatigue and cumulative exposure time. Our findings suggest the importance of considering time use and the associated injury risk tradeoffs. IMPACT ON INDUSTRY: Relevant to state and federal work safety policy makers, our findings suggest the importance of understanding where youth might otherwise spend their time if constraint were placed on their employment opportunities, and the associated injury risk tradeoffs must be taken into consideration.     

A direct observation study of nighttime safety belt use in Indiana

INTRODUCTION: Nearly all direct observation studies of safety belt use are conducted exclusively during daylight hours. Recent work has suggested that safety belt use at night may differ from daytime belt use. METHODS: An observational study of nighttime safety belt use, utilizing specialized night vision equipment, was conducted in Indiana surrounding the Click It or Ticket 2006 safety belt mobilization activities. A pre- and a post-mobilization statewide direct observation survey was conducted at night coinciding with daytime safety belt use data collection conducted by the state of Indiana. Daytime and nighttime belt use rates were compared. RESULTS: The comparisons across the mobilization period revealed a significant increase during the day, but a significant decrease at night. Comparisons between daytime and nighttime belt use revealed no overall difference during the pre wave, but a significant difference during the post wave. Finally, many common daytime trends in belt use were also found at night, with the exception of the typical age and seating position effects. DISCUSSION: The mobilization activities had a positive effect on daytime belt use, but no effect on nighttime belt use, likely resulting in the differences between daytime and nighttime belt use observed during the post wave. IMPACT ON INDUSTRY: The findings of this study suggest that safety belt mobilizations implemented only during the day do not influence nighttime safety belt use. Changes to how these programs are implemented or additional programs specifically targeting belt use at night should be considered, along with continued monitoring of nighttime belt use.