Contribution of canopy leaching to sulphate deposition in a Scots pine forest

Radioactive sulphate (35SO4) was applied to the soil below a Scots pine forest on 23 June 1989, and its movement into the canopy and into throughfall and stemflow was measured over 4 months. The specific activity, Bq (mg S)(-1), of the canopy increased monotonically; uptake by current-year (1989) expanding needles was initially twice as fast as by older needles or live twigs. By 10 October the canopy average specific activity was 62 Bq (mg S)(-1). The specific activity of net throughfall (throughfall + stemflow - rain), deduced from measurements from six throughfall collectors, six stemflow collectors and two rain collectors, fell rapidly from 12.6 Bq (mg S)(-1) in late July to <1 Bq (mg S)(-1) in mid-August. The results suggest (assuming rapid equilibration of 35S with sulphate in soil) that root-derived sulphate contributed c. 3% of sulphate in net throughfall and that dry deposition of SO2 and sulphate particles contributed c. 97% of the 0.56 g S m(-2) measured in net throughfall over the period. Simultaneous measurements of SO2 at canopy height and of NH3 above and within the canopy gave mean concentrations of 5.9 and 0.86 microg m(-3), respectively, sufficient to account for the sulphate measured in net throughfall only if codeposition of NH3 and SO2 occurred to canopy surfaces. The large values of specific activity observed in July, however, indicate that throughfall composition may be closely related to recent soil input of sulphate, and that equilibrium cannot be safely assumed. The possibility of a significant contribution of soil-derived sulphate to sulphate deposition in net throughfall cannot be ruled out on the basis of this experiment.     

Impact of atrazine-bearing agricultural tile drainage discharge on planktonic drift of a natural stream

Preliminary results are reported from a co-operative study between Agriculture Canada and Environment Canada on environmental impacts of atrazine measured in a field stream receiving agricultural drainage. Systematically, tile drained plots of known crop rotation, area, flow and pesticides use were used in the study. A maximum tile drainage concentration of 13.9 microg liter(-1) atrazine was measured while the maximum measured stream concentration was 1.89 microg liter(-1). Phytoplankton and zooplankton samples were collected on a bi-monthly basis during the growing season. The study indicated possible negative impacts of low concentrations of atrazine on planktonic drift populations, when natural stream flow was reduced, resulting in a lower dilution capacity. A 20 m section of the stream was affected by the tile drainage waters as measured by the resident biological community. Both atrazine and ambient environmental conditions were felt to be contributing to the measured results. No negative impacts on planktonic drift populations were evident beyond 50 m downstream of the tile drainage and stream confluence.     

Factors affecting trace-metal bioaccumulation in Finnish headwater lakes

Fourteen unpolluted Finnish headwater lakes with pH values varying from 4.8 to 7.0 were studied for trace-metal concentrations in water, sediment, aquatic plants (Nuphar luteum L., Sparganium sp.), aquatic insect larvae (Limnophilus sp., Phryganea sp.) and fish (Esox lucius L., Perca fluviatilis L., Coregonus sp., Salvelinus fontinalis L., Salmo trutta L.). Trace-metal deposition was estimated by analysing the snowpack. Non-parametric correlation analysis was carried out between trace metal concentrations in biota and pH, ANC, TOC, CA + Mg concentration in water and a given metal concentration in water and sediment. Bioaccumulation of several trace metals increased with increasing acidity and decreasing ANC in water. This was especially true for Pb and Cd. Aquatic plants were, in general, the best indicator group concerning differences in trace-metal bioaccumulation in lakes with different acidity. There was some evidence that a higher concentration of TOC in water may reduce bioaccumulation of Pb, Cd and Zn in aquatic plants and fish. The copper concentration in sediment was the only background variable explaining Cu concentration in aquatic insects. Multivariate analysis of the whole background data gave comparable preliminary results. Over 80% of the trace metal concentrations in biota of different lakes was explained by the background variables. In general, elevated concentrations of most of these trace metals can be expected to occur in the biota of acidified low calcareous lakes.     

A model for the maximum credible hourly impact on any ground receptor from point sources with momentumdominated plume rise

A pollutant dispersion model is developed, allowing rapid evaluation of the maximum credible one-hour-average concentration on any given ground-level receptor, along with the corresponding critical meteorological conditions (wind speed and stability class) for stacks with momentum-dominated plume rise in urban or rural areas under buoyancy or no buoyancy induced dispersion. Site-specific meteorological data are not required, as the computed concentrations are maximized against all credible combinations of wind speed, stability class, and mixing height.The analysis is based on the dispersion relations of Pasquill-Gifford and Briggs for rural and urban settings respectively, the buoyancy induced dispersion correlation of Pasquill, the wind profile exponent values suggested by Irwin, the momentum plume rise relations of Briggs, as well as the Benkley and Schulman's model for the minimum mixing heights.The model is particularly suited for air pollution management studies, as it allows fast screening of the maximum impact on any selected receptor and evaluation of the ways to have this impact reduced. Also, for regulatory purposes, as it allows accurate setting of minimum stack height requirements as function of the exit gas volume and velocity, the pollutant emission rates and their hourly concentration standards, as well as the source location relative to sensitive receptors.     

A review of the likely causal pathways relating the reduced density of breeding dippers Cinclus cinclus to the acidification of upland streams

Previous work has shown that the breeding density of a bird characteristic of upland streams, the dipper Cinclus cinclus, is markedly reduced at low pH in both Wales and Scotland. Populations also declined when streams became more acidic. Evidence of causal explanation for these relationships is that: (1) Food quantity is reduced in acidic streams, and important prey, including those rich in calcium, are scarce; (2) Blood chemistry in pre-breeding birds differs between acid and circumneutral streams, with plasma calcium reduced in those breeding at low pH. Skeletal sources of calcium are probably limited; (3) The time spent foraging by pre-breeding birds on acidic streams is markedly increased, even though overall energy costs on acidic and circumneutral streams are similar. Body condition is inferior to birds on circumneutral streams; (4) Egg laying is significantly delayed on acidic streams irrespective of an effect on laying of altitude, and clutch and brood sizes are significantly reduced; (5) Eggs are lighter and shells thinner at low pH; (6) Chick growth is reduced at low pH; (7) Contamination by heavy metals and persistent organochlorines is low in the populations on acidic streams and cannot explain the impaired breeding performance. None of these features can exclude the possibilities that acidic streams either hold populations of poor quality birds, which show the above features, or that acidity affects the breeding ecology of all dippers that attempt to breed at low pH. The qualitative outcome of these two alternatives is identical.     

Modelling episodic acidification of surface waters: the state of science

Field studies of chemical changes in surface waters associated with rainfall and snowmelt events have provided evidence of episodic acidification of lakes and streams in Europe and North America. Modelling these chemical changes is particularly challenging because of the variability associated with hydrological transport and chemical transformation processes in catchments. This paper provides a review of mathematical models that have been applied to the problem of episodic acidification. Several empirical approaches, including regression models, mixing models and time series models, support a strong hydrological interpretation of episodic acidification. Regional application of several models has suggested that acidic episodes (in which the acid neutralizing capacity becomes negative) are relatively common in surface waters in several regions of the US that receive acid deposition. Results from physically based models have suggested a lack of understanding of hydrological flowpaths, hydraulic residence times and biogeochemical reactions, particularly those involving aluminum. The ability to better predict episodic chemical responses of surface waters is thus dependent upon elucidation of these and other physical and chemical processes.     

Comparison of episodic acidification in Canada, Europe and the United States

Episodic acidification is practically a ubiquitous process in streams and drainage lakes in Canada, Europe and the United States. Depressions of pH are often smaller in systems with low pre-episode pH levels. Studies on European surface waters have reported episodes most frequently with minimum pH levels below 4.5. In Canada and the United States, studies have also reported a number of systems that have had minimum pH levels below 4.5. In all areas, change in water flowpath during hydrological events is a major determinant of episode characteristics. Episodic acidification is also controlled by a combination of other natural and anthropogenic factors. Base cation decreases are an important contributor to episodes in circumneutral streams and lakes. Sulphate pulses are generally important contributors to episodic acidification in Europe and Canada. Nitrate pulses are generally more important to episodic acidification in the Northeast United States. Increases in organic acids contribute to episodes in some streams in all areas. The sea-salt effect is important in near-coastal streams and lakes. In Canada, Europe and the United States, acidic deposition has increased the severity (minimum pH reached) of episodes in some streams and lakes.     

Effects of clearfelling on stream and soil water aluminium chemistry in three UK forests

Data are presented demonstrating how clearfelling has changed soil and stream water aluminium chemistry. For soil waters, a strong empirical relationship was observed between inorganic aluminium (Al(inorg)) and total inorganic anion (TIA) concentrations. Before felling, chloride and sulphate accounted for the largest proportion of the TIA concentration. After felling, in soils where nitrification was active, nitrate became increasingly important. Where this led to an increase in TIA, Al(inorg) concentrations increased. Over five years, nitrate concentrations have fallen, along with TIA, resulting in a sympathetic decline in Al(inorg). Streams draining clearfelled areas initially became more acid, although chloride and sulphate concentrations decreased. Stream water nitrate concentrations increased soon after felling and remained higher than controls for up to four years. While nitrate concentrations were high, Al(inorg) remained unchanged. Subsequently, as nitrate and TIA decreased, Al(inorg) also declined to concentrations below those in the control stream. Clearfelling upland forests will not necessarily result in immediate improvements in water quality, although long-term benefits may be seen before canopy-closure of the next crop.     

Seasonal trend of fog water chemical composition in the Po Valley

Fog frequency in the Po Valley, Northern Italy, can be as high as 30% of the time in the fall-winter season. High pollutant concentrations have been measured in fog water samples collected in this area over the past few years. The combined effects of high fog occurrence and high pollutant loading of the fog droplets can determine, in this area, appreciable chemical deposition rates. An automated station for fog water collection was developed, and deployed at the field station of S. Pietro Capofiume, in the eastern part of the Po Valley for an extended period: from the beginning of November 1989 to the end of April 1990. Time-resolved sampling of fog droplets was carried out during all fog events occurring in this period, and chemical analyses were performed on the collected samples. Statistical information on fog occurrence and fog water chemical composition is reported in this paper, and a tentative seasonal deposition budget is calculated for H+, NH4+, NO3- and SO4(2-) ions. The problems connected with fog droplet sampling in sub-freezing conditions are also addressed in the paper.     

An introduction to critical loads

The critical loads approach to emission controls of gaseous pollutants is a concept with a short but eventful history. Despite difficulties with definitions and agreed values, its acceptance within the UN-ECE Convention on Long Range Transboundary Air Pollution has provided the impetus for developing methods to put critical loads to a practical use-the revision of the UNECE emission protocols for sulphur and nitrogen. Methodologies first focus upon quantifying a pollutant threshold at which harmful effects occur on particular sensitive receptors (usually biological species). This threshold is known as the critical load for deposited pollutants, and as the critical level for gaseous pollutants acting on receptors. To calculate a critical load, biological effects are usually 'translated' to critical chemical values, e.g. harmful effects on fish 'translate' to alkalinity or aluminium concentrations in water; thus, critical load calculations may be based upon the chemistry of a system. Such calculations may be performed using simple, steady-state models, whilst the use of more complex, dynamic models provides an insight into the past and future trends. Maps of critical loads can be drawn using calculated values, and maps of pollutant deposition data will then show geographical areas where critical loads are exceeded. Spatial emission-deposition models can identify sources contributing to areas of excess loads and quantify necessary emission reductions. Optimization procedures applied to such models can derive abatement strategies related to economic costs and critical load effects. The critical load calculations may also be used to underpin the setting of target loads; these are pollutant loads, determined by political agreement, which take account of social, economic and political considerations.