Sampling and analysis for radon-222 dissolved in ground water and surface water

Radon-222 is a naturally occurring radioactive gas in the uranium-238 decay series that has traditionally been called, simply, radon. The lung cancer risks associated with the inhalation of radon decay products have been well documented by epidemiological studies on populations of uranium miners.The realization that radon is a public health hazard has raised the need for sampling and analytical guidelines for field personnel. Several sampling and analytical methods are being used to document radon concentrations in ground water and surface water worldwide but no convenient, single set of guidelines is available. Three different sampling and analytical methods-bubbler, liquid scintillation, and field screening-are discussed in this paper. The bubbler and liquid scintillation methods have high accuracy and precision, and small analytical method detection limits of 0.2 and 10 pCi/l (picocuries per liter), respectively. The field screening method generally is used as a qualitative reconnaissance tool.     

Life-history parameters and vertical distribution of Maurolicus muelleri in Masfjorden in summer

Population characteristics, individual life-history variables, feeding and vertical distribution of the mesopelagic fish Müller's pearlside Maurolicus muelleri collected in 1990 in Masfjorden, western Norway, are reported as well as environmental variables from the fjord. Minimum size at maturity was far smaller than reported from previous investigations in the same region. Fecundity was size-dependent and total egg numbers were higher than reported from other investigations of M. muelleri world wide, while the number of maturing eggs was far lower than observed in the same region earlier. Food concentration in the fjord was an order of magnitude lower than previous early summer observations, and several factors indicated that feeding opportunities may have been low for a long period. Daily feeding rate (g prey g^-1 fish) decreased with increasing fish size. These observations fit well with a model of maximizing fitness by means of a flexible size at maturity. Minimum age at maturity seems to be achieved at the expense of fecundity. M. muelleri was concentrated in a 20 to 30 m deep sound scattering layer (SSL). The SSL stayed close to the surface during the night and at 100 to 180 m during the daytime. The vertical position of the SSL varied instantaneously with changes in surface light intensity, remaining at 10^-3 to 10^-4 mol m^-1 s^-1 at the top of the SSL. Stomach fullness was highest during the night; feeding intensity seems to have been peaked at dusk. Cladocerans were the main prey ranked by number, copepods by biomass. Intake of large copepods increased with fish size.     

Polycyclic aromatic compounds in Northwest Atlantic COD (Gadus morhua)

Twenty-seven polycyclic aromatic compounds (PAC) including polycyclic aromatic hydrocarbons (PAH) and polycyclic aromatic sulphur heterocycles were analysed in muscle, liver and ovaries of cod (Gadus morhua) from the Northwest Atlantic. These PAC include the 16 PAH priority pollutants (EPA recommendation), alkylated naphthalenes, phenanthrene-anthracenes as well as dibenzothiophenes (DBT). Aromatics were undetectable in muscle. One of the analysed PAC was detected in one ovary and six in another ovary sample. Liver samples contained between 1 and 9 PAC. Of the parental PAH, only acenapthene (18 ng/g, dry weight), fluorene (28 ng/g) and chrysene (22 ng/g) were detected once each in two liver samples, while fluorene (72 ng/g) was detected once in one of the ovaries. C-2 DBT was the major component in ovaries and liver (8-86 ng/g), while C-3 and C-4 alkylated phenanthrene-anthracene (12-78 ng/g) were the next major components detected in the liver samples. This is the first detailed study of PAH and PAC in finfish from the Northwest Atlantic.     

Induction of metamorphosis in larvae of the oyster Crassostrea gigas using neuroactive compounds

Chemical (neuroactive compounds at different concentrations and exposure times) and physical (water agitation, light) factors with potential effects on the metamorphosis of larvae of the oyster Crassostrea gigas (Thunberg) larvae have been studied. The neurotransmitters l-dihydroxyphenylalanine (DO), epinephrine (EP), norepinephrine (NE), and acetylcholine (AC) have been identified as very active inducers of metamorphosis, whilst serotonin (SE), dopamine (DA) and potassium (K) were less effective inducers. The -aminobutyric acid (GA) and ammonium (AM) were found ineffective at the concentrations tested. Exposure to 10^-4 M EP for 15 min was sufficient to promote >80% metamorphosis within 48 h, whereas NE required 2 h to exert comparable induction. Maximum induction by DO (>50%) was achieved after 2 h exposure to 10^-4 M. However, unlike EP and NE, DO was lethal at that concentration in the long term. Maximum induction by AC (30% metamorphosis) was achieved at a concentration of 10^-4 M. In contrast to other neurotransmitters, AC induced settlement behaviour, cementation and eventual metamorphosis, yielding postlarvae which were all attached to the substratum. EP and NE triggered the morphogenetic changes, by-passing settlement and leading to postlarvae not cemented to the substratum. DO induced mostly attached spat at low concentrations (10^-5 M) and unattached spat at high concentrations (10^-4 M), and a similar pattern was apparent for the weaker inducers SE and DA. Regarding physical factors, a highly reflectant surface significantly increased the percentage of attached spat obtained, compared to a dark bottom. No consistent effect of water current or light was detected on the production of unattached spat. The three different forms of induction are discussed in relation to different regulatory pathways of settlement and metamorphosis.     

Interactions between copper and cadmium modify metal organ distribution in mature tilapia, Oreochromis mossambicus

Sexually mature female tilapia were exposed to sublethal concentrations of waterborne Cu and/or Cd over 6 days, and subsequent body concentrations of these metals were determined in several organs. The results show that the distribution of Cu and Cd was metal and organ specific. This is demonstrated, for example, by the observation that in tilapia, Cu exposure did not result in Cu accumulation in the liver, whereas in the intestinal wall, notably high concentrations of Cu and Cd were measured in metal exposed fish. In addition to single metal exposed fish, we also determined Cu and Cd body distribution in Cu?Cd co-exposed fish. The observed interactions in metal accumulation were most pronounced in the organs of fish exposed to low, environmentally realistic, metal concentrations.     

Linear least squares method for time series analysis with an application to a methane time series

A simple method of time series analysis, based upon linear least squares curve fitting, is developed. The method's advantages and disadvantages are discussed, and an example is presented using the Vostok Core methane record.     

Fractionation of Cu, Pb and Zn in certified reference soils SRM 2710 and SRM 2711 using the optimized BCR sequential extraction procedure

Sequential extraction of metals from solid media is a common analytical tool used in environmental and exploration geochemistry. A number of procedures exist, but without harmonization and standardization, meaningful comparisons are tenuous without baseline data. A newly developed, standardized sequential extraction procedure (optimized BCR) was applied to two contaminated certified reference soils from Montana, US (SRM 2710 and SRM 2711) for Cu, Pb and Zn. Four operationally defined fractions were isolated, acid extractable, reducible, oxidizable, and residual (by aqua regia). Fraction-specific concentrations, percentages and recoveries for Cu, Pb and Zn were used to explore differences between the optimized BCR procedure and three other sequential extraction schemes with published data for SRM 2710 and 2711 (i.e. Tessier scheme, Geological Survey of Canada scheme and the original BCR scheme). Results indicate significant differences between the four schemes, even for schemes that are closely associated (i.e. the original and optimized BCR schemes). Order-of-magnitude fraction-specific concentration differences were observed, especially for Pb in the reducible fraction. Differences between schemes are worrisome because trends varied between metals, between fractions and between reference soils. These data reinforce the need for increased adoption of standardized sequential extraction procedures and further examination of different solid media.     

不锈钢壳体的冷挤压工艺及模具设计

壳体是机械中广泛使用的重要零件之一.采用冷挤压工艺可提高质量、降低成本.对不锈钢壳体成形工艺及模具设计作了详细讨论.     

Ecoprofit-Styria-prepare Thirteen pollution prevention case studies in the Styrian industry

The paper focuses upon the organization of a federal state-funded pollution prevention project in the Styrian industry. The project includes 13 companies from the textile, pulp and paper, machine building, wood working and printed circuit board manufacturing industries, covering most of the sectors and sizes in the Styrian industry. It started in January 1994 and will last for one year. It will demonstrate the possibilities of pollution prevention and the need for further research work. This project will make use of the methods and tools that were refined in the Austrian Prepare project. As a first step, a systematic balance of all the inputs and outputs of a company is made, after which the weak points and inefficiencies of material and energy use are identified and the options for improvements, both economical and ecological, are defined. Consequently, modifications in products and production lead to a situation with less waste and emissions. The preliminary lessons from these projects are presented: as a rule, the utilities (consumption of process materials and water, cleaning, energy, preparatory and finishing steps) are treated as black boxes and usually represent a considerable optimization potential. In these areas especially there is usually a lack of information and coordination as well as a need for a systematic and comprehensive approach. Leadership in the company and creative consultants are needed for starting lasting successful pollution prevention projects.