Nitrous oxide (N2O) emissions from waste and biomass to energy plants.

Following the Kyoto protocol with respect to reducing emissions of greenhouse gases emissions, and EU energy policy and sustainability in waste management, there has been an increased interest in the reduction of emissions from waste disposal operations. From the point of view of nitrous oxide (N2O) emissions, waste incineration and waste co-combustion are very acceptable methods for waste disposal. In order to achieve very low N2O emissions from waste incineration, particularly for waste with higher nitrogen content (e.g. sewage sludge), two factors are important: temperature of incineration over 900 degrees C and avoiding the selective non-catalytic reduction (SNCR) de-NO(X) method based on urea or ammonia treatments. The more modern selective catalytic reduction (SCR) systems for de-NO(X) give rise to negligible sources of N2O.     

The importance of training for environmental management

Conclusion I wish to conclude as I began, with a quotation from a newspaper on the potential damage and the attendant costs of not applying sound environmental management: The Guardian, Wednesday, 5 October 1983: “The Shell Oil Company which admitted yesterday that it had allowed dangerous pesticides to escape near Denver, Colorado has received a demand from the US Army for $1 8 billion to help to stop pollution from reaching the city ... Shell and the US Army research, which includes experiments with nerve gas, may have caused far more serious pollution in the area.” The need for sustainable development and for training in environmental management in Third World countries, should ensure that reports on environmental damage, such as the one above, do not become a common occurrence in developing countries in the next decade or hopefully forever after. This paper was presented at the conference “The Environmental Dimension in World Development, the contribution that British Companies can make”, organized by the Centre for World Development Education, London, UK, during October 1983. Dr Jose I. Furtado is Professor of Zoology in Malaysia, and is seconded as Science Adviser with the Commonwealth Secretariat in London.     

Mercury accumulation in soils and plants in the Almadén mining district, Spain: one of the most contaminated sites on Earth

Although mercury (Hg) mining in the Almadén district ceased in May 2002, the consequences of 2000 years of mining in the district has resulted in the dissemination of Hg into the surrounding environment where it poses an evident risk to biota and human health. This risk needs to be properly evaluated. The uptake of Hg has been found to be plant-specific. To establish the different manners in which plants absorb Hg, we carried out a survey of Hg levels in the soils and plants in the most representative habitats of this Mediterranean area and found that the Hg concentrations varied greatly and were dependent on the sample being tested (0.13–2,695 μg g⁻¹ Hg). For example, the root samples had concentrations ranging from 0.06 (Oenanthe crocata, Rumex induratus) to 1095 (Polypogon monspeliensis) μg g⁻¹ Hg, while in the leaf samples, the range was from 0.16 (Cyperus longus) to 1278 (Polypogon monspeliensis) μg g⁻¹ Hg. There are four well-differentiated patterns of Hg uptake: (1) the rate of uptake is constant, independent of Hg concentration in the soil (e.g., Pistacia lentiscus, Quercus rotundifolia); (2) after an initial linear relationship between uptake and soil concentration, no further increase in Hg_plant is observed (e.g., Asparagus acutifolius, Cistus ladanifer); (3) no increase in uptake is recorded until a threshold is surpassed, and thereafter a linear relationship between Hg_plant and Hg_soil is established (e.g., Rumex bucephalophorus, Cistus crispus); (4) there is no relationship between Hg_plant and Hg_soil (e.g., Oenanthe crocata and Cistus monspeliensis). Overall, the Hg concentrations found in plants from the Almadén district clearly reflect the importance of contamination processes throughout the study region.     

Vapour pressures, aqueous solubility, Henry's law constants and air/water partition coefficients of 1,8-dichlorooctane and 1,8-dibromooctane

New data on the vapour pressures and aqueous solubility of 1,8-dichlorooctane and 1,8-dibromooctane are reported as a function of temperature between 20 °C and 80 °C and 1 °C and 40 °C, respectively. For the vapour pressures, a static method was used during the measurements which have an estimated uncertainty between 3% and 5%. The aqueous solubilities were determined using a dynamic saturation column method and the values are accurate to within ±10%. 1,8-Dichlorooctane is more volatile than 1,8-dibromooctane in the temperature range covered (p_sat varies from 3 to 250 Pa and from 0.53 to 62 Pa, respectively) and is also approximately three times more soluble in water (mole fraction solubilities at 25 °C of 5.95 × 10⁻⁷ and 1.92 × 10⁻⁷, respectively). A combination of the two sets of data allowed the calculation of the Henry’s law constants and the air water partition coefficients. A simple group contribution concept was used to rationalize the data obtained.     

Aquatic risk assessment of the new rice herbicide profoxydim

A tiered protocol for assessing ecological risks has been applied to the rice pesticide profoxydim. The initial assessment (Tier I) was based on toxicity exposure ratio (TER) calculations based on laboratory data using a worst-case rice scenario. The first refinement (Tier II) was based on direct toxicity assessment (DTA) of water samples collected during a field-mesocosm study. Finally, a higher-tier assessment on the in situ assessment of paddy community responses (field-mesocosm-Tier III) was performed. A successive application of three pesticides, the herbicides azimsulfuron, propanil and the insecticide malathion, was used as reference controls. The refined assessments indicated a lower risk than that predicted from TER estimations. DTA-based Tier II showed toxicity effects only for concentrations above the recommended dose of profoxydim. Effects for reference controls were observed in DTA which were not expected from Tier I. The field-mesocosm study confirmed these effects but also showed that they were transient and of low relevance.