Mercury transfer from soil to olive trees. A comparison of three different contaminated sites

Mercury contents in soil and olive tree leaves have been studied in 69 plots around three different source areas of this element in Spain: Almadén (Ciudad Real), Flix (Tarragona) and Jódar (Jaén). Almadén was the world’s largest cinnabar (HgS) mining district and was active until 2003, Flix is the oldest Spanish chlor-alkali plant (CAP) and has been active from 1898 to the present day and Jódar is a decommissioned CAP that was active for 14 years (1977–1991). Total mercury contents have been measured by high-frequency modulation atomic absorption spectrometry with Zeeman effect (ZAAS-HFM) in the soils and olive tree leaves from the three studied areas. The average soil contents range from 182 μg kg^?1 in Flix to 23,488 μg kg^?1 in Almadén, while the average leaf content ranges from 161 μg kg^?1 in Jódar to 1213 μg kg^?1 in Almadén. Despite the wide range of data, a relationship between soil–leaf contents has been identified: in Almadén and Jódar, multiplicative (bilogarithmic) models show significant correlations (R?=?0.769 and R?=?0.484, respectively). Significant correlations were not identified between soil and leaf contents in Flix. The continuous activity of the Flix CAP, which remains open today, can explain the different uptake patterns for mercury, which is mainly atmospheric in origin, in comparison to the other two sites, where activity ceased more than 10 years ago and only soil uptake patterns based on the Michaelis–Menten enzymatic model curve are observed.     

Optimization of Microwave-Assisted and Conventional Heating Comparative Synthesis of Poly(lactic acid) by Direct Melt Polycondensation from Agroindustrial Banana (Musa AAA Cavendish) and Pineapple (Ananas comosus) Fermented Wastes

In Costa Rica, a lot of pineapple (Ananas comosus) and banana (Musa AAA) agroindustrial residues are generated each year. These residues can be used to obtain l-lactic acid by fermentation, ultrafiltration and electrodialysis. Poly(l-lactic acid) (PLLA) is a biodegradable and renewable polyester with many industrial and biomedical applications. There is a growing interest to improve the energetic efficiency of the synthesis of PLLA, because the main issue to produce this polymer is the high productive cost compared with petrochemical traditional commodities. In this research, the synthesis of PLLA through two different techniques was compared: microwave-assisted and conventional heating. On microwave synthesis the best results were obtained using lower temperatures and lower reaction times than the conventional heated synthesis. The reaction time was reduced from 15 h by conventional heating to 4.5 h using microwave-assisted synthesis.     

Spatial distribution of illicit drugs in surface waters of the natural park of Pego-Oliva Marsh (Valencia,Spain)

Background, aim and scope  

The Pego-Oliva Marsh is the second most important wetland in the Valencian Community (Spain). It is included in the RAMSAR agreement and represents one key point for migratory birds. Emerging contaminants from the human pressure, such as pharmaceuticals, illicit drugs and personal care product, are not included in the list of priority contaminants of the Water Framework Directive yet, and are neither monitored nor controlled. However, pollution of emerging contaminants can threaten the environment and even human health. In order to understand the status of the emerging contamination and recommend future rationalization of countermeasures, the occurrence of illicit drugs was investigated.     

Obtaining polycyclic aromatic hydrocarbon concentration ratios and molecular markers for residential wood combustion: Temuco, a case study

It is known that residential wood combustion (RWC) is an important source of fine particle emissions. The purpose of this work was to characterize the chemical composition of the particulate matter present in the Temuco urban atmosphere during winter, specifically the polycyclic aromatic hydrocarbon (PAH) profile, because PAHs are considered to be among the key compounds in particulate matter toxicity. During the 2008 winter monitoring campaign, samples of particulate matter with aerodynamic diameters of < or = 10 (PM10) and < or = 2.5 (PM2.5) microm were taken on days with contamination episodes. Sixteen U.S. Environmental Protection Agency (EPA) PAH compounds were extracted with toluene and determined by gas chromatography-mass spectrometry (GC-MS). The results show that phenantrene was the predominant compound associated with particulate matter at a concentration range between 300 and 600 ng m(-3), 18 times higher than the second most abundant PAH compound. High-molecular-mass compounds such as dibenz[a,h]anthracene, benzo[g,h,i]perylene, and indeno[1,2,3,c,d]pyrene were also found, but they were minorities in the set. It was recognized from the PAH concentration ratios of the Temuco atmospheric aerosol that the main contamination source was in fact residential wood combustion; although not all the concentration ratios evaluated match the reported reference values, probably due to the kind of biomass used, the characteristics of Chilean heating appliances and climate.     

Pesticide effects on crabs: How environmental concentrations of endosulfan and chlorpyrifos affect embryos

The objectives of this work were to evaluate the effects of environmentally relevant chlorpyrifos and endosulfan, concentrations in the incubation period, effective hatching and survival of embryos and neonates of the freshwater burrowing crab, Zilchiopsis collastinensis (Decapoda, Trichodactylidae). Both pesticides were prepared from commercial and technical grade products. The exposure to about 100, 200, and 400 ng endosulfan L^?1, and 48, 240, and 1,200 ng chlorpyrifos L^?1 did not cause differences in the incubation period or in effective hatching but decreased survival of neonates, especially in the concentrations prepared from the technical grade product. Even if these concentrations are below the median lethal concentration (LC₅₀) values for embryos, these caused a significant decrease in the survival of neonates, i.e. when crabs are outside the egg and not protected by chorion. The decrease in the neonate population caused by these concentrations, which could be found in the environment, might impact aquatic communities.     

Low-level arsenic exposure is associated with bladder cancer risk and cigarette smoking: a case–control study among men in Tunisia

Although exposure to high levels of arsenic is associated with excess bladder cancer risk, lower exposures generally are not. This study represents the first biomonitoring of arsenic exposure in Tunisia and focuses on a possible association with bladder cancer risk. In this context, 124 male bladder cancer cases and 220 controls were recruited and blood samples were analyzed to determine the concentration of As. The study subjects were stratified into median groups based on concentrations of arsenic in their blood. Blood arsenic (B-As) was significantly two to threefold higher in bladder cancer cases than in controls (p?<?0.05). The arsenic concentrations were significantly higher among both smokers and workers in construction. However, neither drinking water nor seafood was found to be incriminated as exposure sources. The adjusted risk ratios for B-As concentration categories 0.1–0.67 and ≥0.67 μg/L were 0.18 (95% CI?=?0.014–2.95) and 2.44 (95% CI?=?1.11–5.35), respectively. Arsenic levels were not found to be associated with tumor grade or stage. The considerable risk in the category of highest cumulative exposure argues for an association between bladder cancer risk and low-level arsenic exposure. Future investigations with larger samples and using techniques that allow the distinction of the different arsenic species should better elucidate this association. Furthermore, the modulation of arsenic level according to the histological grade may be of potential to be used as a diagnostic marker of the disease process and its possible relationship etiologically.     

Performance of a field-scale permeable reactive barrier based on organic substrate and zero-valent iron for in situ remediation of acid mine drainage

A permeable reactive barrier (PRB) was installed in Aznalcóllar (Spain) in order to rehabilitate the Agrio aquifer groundwater severely contaminated with acid mine drainage after a serious mining accident. The filling material of the PRB consisted of a mixture of calcite, vegetal compost and, locally, Fe⁰ and sewage sludge. Among the successes of the PRB are the continuous neutralisation of pH and the removal of metals from groundwater within the PRB (removals of >95 %). Among the shortcomings are the improper PRB design due to the complexity of the internal structure of the Agrio alluvial deposits (which resulted in an inefficient capture of the contaminated plume), the poor degradability of the compost used and the short residence time within the PRB (which hindered a complete sulphate reduction), the clogging of a section of the PRB and the heterogeneities of the filling material (which resulted in preferential flows within the PRB). Undoubtedly, it is only through accumulated experience at field-scale systems that the potentials and limits of the PRB technology can be determined.     

The Influences of Ambient Particle Composition and Size on Particle Infiltration in Los Angeles,CA, Residences

Abstract

Particle infiltration is a key determinant of the indoor concentrations of ambient particles. Few studies have examined the influence of particle composition on infiltration, particularly in areas with high concentrations of volatile particles, such as ammonium nitrate (NH₄NO₃). A comprehensive indoor monitoring study was conducted in 17 Los Angeles–area homes. As part of this study, indoor/outdoor concentration ratios during overnight (nonindoor source) periods were used to estimate the fraction of ambient particles remaining airborne indoors, or the particle infiltration factor (F_INF), for fine particles (PM_2.5), its nonvolatile (i.e., black carbon [BC]) and volatile (i.e., nitrate [NO₃ ^?]) components, and particle sizes ranging between 0.02 and 10 μm. F_INF was highest for BC (median = 0.84) and lowest for NO₃ ^? (median = 0.18). The low F_INF for NO₃ ^? was likely because of volatilization of NO₃ ^? particles once indoors, in addition to depositional losses upon building entry. The F_INF for PM_2.5 (median = 0.48) fell between those for BC and NO₃ ^?, reflecting the contributions of both particle components to PM_2.5. F_INF varied with particle size, air-exchange rate, and outdoor NO₃ ^? concentrations. The F_INF for particles between 0.7 and 2 μm in size was considerably lower during periods of high as compared with low outdoor NO₃ ^? concentrations, suggesting that outdoor NO₃ ^? particles were of this size. This study demonstrates that infiltration of PM_2.5 varies by particle component and is lowest for volatile species, such as NH₄NO₃. Our results suggest that volatile particle components may influence the ability for outdoor PM concentrations to represent indoor and, thus, personal exposures to particles of ambient origin, because volatilization of these particles causes the composition of PM_2.5 to differ indoors and outdoors. Consequently, particle composition likely influences observed epidemiologic relationships based on outdoor PM concentrations, especially in areas with high concentrations of NH₄NO₃ and other volatile particles.     

Evaluating pollution-related damage and restoration success in urban forests with participatory monitoring and digital tools

Peri-urban forest monitoring requires indicators of vegetation damage. An example is the sacred fir (Abies religiosa) forests surrounding Mexico City, which have been heavily exposed to tropospheric ozone, a harmful pollutant, for over 4 decades. We developed a participatory monitoring system with which local community members and scientists generated data on ozone tree damage. Santa Rosa Xochiac rangers (13) used the digital tool KoboToolBox to record ozone damage to trees, tree height, tree ages, tree condition, tree position, and whether the tree had been planted. Thirty-five percent of the trees (n = 1765) had ozone damage. Younger trees had a lower percentage of foliage damaged by ozone than older trees (p < 0.0001), and asymptomatic trees tended to be younger (p < 0.0001). Symptomatic trees were taller than asymptomatic trees of the same age (R²_c = 0.43, R²_m = 0.27). Involving local communities facilitated forest monitoring and using digital technology improved data quality. This participatory system can be used to monitor forest condition change over time and thus aids restoration efforts driven by government or local communities’ interests, facilitating local decision-making.     

Urban soil quality of Raipur,Chhattisgarh, India

Soil quality in urban areas in India is degraded due to multiple anthropogenic activities. The objectives of this work are to determine the concentration variations, toxicity, and sources of carbons, metals, and ions in the surface soil of Raipur, the industrialized capital city of Chhattisgarh state, India. High concentrations of Al, K, Ca, Ti, Fe, and elemental carbon (EC) were registered. Relatively lower concentrations of V, Cr, Mn, Ni, Cu, Zn, Sr, Ba, Pb, organic carbon (OC), and carbonate carbon (CC), as well as ions (viz. F^–, Cl^–, NO₃^–, SO₄^2–, Na⁺, K⁺, Mg²⁺, and Ca²⁺), were also recorded. EC was found to be one of the major pollutants, although enrichment factors pointed to high contamination with SO₄^2–, K⁺, Mg²⁺_, Cr, Mn, and Pb; and extreme contamination with NO₃^– and Ca²⁺. The spatial and temporal variations, enrichment factors, toxicity, and sources of the chemical species detected in the soil are discussed.