The Biodiversity Crisis and Adaptation to Climate Change: A Case Study from Australia's Forests

If current trends continue, human activities will drastically alter most of the planet's remaining natural ecosystems and their composite biota within a few decades. Compounding the impacts on biodiversity from deleterious management practices is climate variability and change. The Intergovernmental Panel on Climate Change (IPCC) recently concluded that there is ample evidence to suggest climate change is likely to result in significant impacts on biological diversity. These impacts are likely to be exacerbated by the secondary effects of climate change such as changes in the occurrence of wildfire, insect outbreaks and similar disturbances. Current changes in climate are very different from those of the past due to their rate and magnitude, the direct effects of increased atmospheric CO₂ concentrations and because highly modified landscapes and an array of threatening processes limit the ability of terrestrial ecosystems and species to respond to changed conditions. One of the primary human adaptation option for conserving biodiversity is considered to be changes in management. The complex and overarching nature of climate change issues emphasises the need for greatly enhanced cooperation between scientists, policy makers, industry and the community to better understand key interactions and identify options for adaptation. A key challenge is to identify opportunities that facilitate sustainable development by making use of existing technologies and developing policies that enhance the resilience of climate-sensitive sectors. Measures to enhance the resilience of biodiversity must be considered in all of these activities if many ecosystem services essential to humanity are to be sustained. New institutional arrangements appear necessary at the regional and national level to ensure that policy initiatives and research directed at assessing and mitigating the vulnerability of biodiversity to climate change are complementary and undertaken strategically and cost-effectively. Policy implementation at the national level to meet responsibilities arising from the UNFCCC (e.g., the Kyoto Protocol) and the UN Convention on Biological Diversity require greater coordination and integration between economic sectors, since many primary drivers of biodiversity loss and vulnerability are influenced at this level. A case study from the Australian continent is used to illustrate several key issues and discuss a basis for reform, including recommendations for facilitating adaptation to climate variability and change.     

Ambient Air Quality at the Site of a Former Manufactured Gas Plant

Prior to the 1950's, manufactured gas was commerciallyproduced from the pyrolysis of coal, coke, and oil atfacilities that are termed manufactured gas plants (MGPs). The constituents of residual coal tar present on many MGPsites are an environmental health concern because of theirtoxicity and the possibility for their off-site migration viawater and air. Atmospheric concentrations of five volatileorganic compounds (VOCs, e.g., benzene), sixteen polycyclicaromatic hydrocarbons (PAHs, e.g., naphthalene), and particulate matter less than 10 microns in aerodynamicdiameter (PM₁₀) were measured at the site of a former MGP. Air samples were obtained before, during, and after excavationof subterranean coal tar at the site. The results of thisinvestigation indicate that subterranean coal tar was not aprimary source of VOCs and PAHs in the local atmosphere beforeor after remediation of the site. However, excavation,treatment, blending, and transfer of the coal tar duringremediation generated concentrations of selected aromatic andsemi-volatile organic compounds that were substantiallygreater than typical ambient levels. In addition, these datasuggest that blending and mixing of coal tars could lead toexceedance of the U.S. National Ambient Air Quality Standardfor PM₁₀, although additional research is required to fullyevaluate this possibility. Nuisance odors associated with thesite remediation were likely the result of naphthalene andpossibly isomers of xylene. Air pollutant concentrationsmeasured adjacent to the excavation area and at the siteperimeter during remediation activities were less than therelevant occupational and environmental exposure limits.     

Twenty-five years of nationwide ambient metals measurement in the United Kingdom: concentration levels and trends

Ambient air quality has been an important issue for humans and the environment for hundreds of years. More recently, definitive links have been identified between pollutants and adverse effects on human health and on environmental sustainability. Of particular concern since the last quarter of the twentieth century has been the presence of toxic 'heavy metals' in ambient air. In order to measure the concentrations of pollutants, including 'heavy metals', in ambient air, to assess human and environmental exposure, comply with developing legislation, and assess newly introduced abatement strategies, the UK government established nationwide air quality measurement networks in the late 1970s. The nationwide measurement of 'heavy metals' in ambient air began in the late 1970s, and in 1980 was developed into several national networks, aimed at different metals and different emissions sources. These networks were rationalised into the current UK Heavy Metals Monitoring Network in 2003. The data produced by the current scientific operator of the Network, the National Physical Laboratory (NPL), in 2005, marked 25 years of ambient 'heavy metals' measurement in the UK at a nationwide level. This paper celebrates this milestone and provides a novel and critical examination of Network operations, measured concentration levels, and trends, over the last quarter of a century.     

Selenium in surface and irrigation water in the Kendrick irrigation district, Wyoming

High selenium (Se) concentrations have been found in surface waters in the Kendrick Reclamation Project, Wyoming. Precipitation and irrigation water moving over seleniferous soils are contributing causes, and drought may exacerbate this. This study surveyed Se concentrations and discharges in local surface streams, irrigation drains, and the delivery canal. Sites were sampled monthly and analyzed for Se and total suspended solids (TSS). A completely randomized design with two factors (soil parent material and location, inside or outside irrigation district) was used. Mean Se concentrations were 64 μg L^???1 inside the irrigation district on shale soils, 17 μg L^???1 inside the district off shale soils, 5 μg L^???1 outside the district on shale soils, and 3 μg L^???1 outside the district off shale soils. Correlations between discharge and Se concentrations were generally negative, while correlations between discharge and Se load were generally positive. There was little correlation between load and concentration, and little correlation between TSS and Se. A comparison of Se concentrations in streams and drains showed Se concentrations were significantly higher (p?<?0.001) in streams during the irrigation season, but not in the off-season (p?=?0.515). We conclude that higher discharges decrease Se concentration, but increase load. Conversion from flood to sprinkle irrigation may increase Se concentrations by reducing discharge, but decrease Se loads going into the N. Platte River, and will likely alter the timing and magnitude of flows. Both load and concentration should be considered when implementing Se regulations and standards.     

Comparison of USEPA digestion methods to heavy metals in soil samples

The use of appropriate analytical methods is of paramount importance for risk assessment and monitoring of potentially toxic metals in soils. In this sense, the objective of this study was to compare the effectiveness of two sample digestion methods, recommended by the Brazilian legislation for the management of contaminated areas (CONAMA 2009), aiming at the determination of environmentally available metal concentrations (USEPA 3050B, USEPA 3051A), as well as a total digestion method (USEPA 3052). Samples from 10 classes of soils were analyzed for Cu, Zn, Cd, Pb, Ni, and Hg. The results showed that the USEPA method 3051A is more efficient than the USEPA method 3050B in the extraction of levels considered environmentally available of Zn, Cu, Cd, Pb, and Ni. Besides providing a higher recovery of these elements, the method requires shorter digestion time, lower consumption of acids, and reduced risk of contamination. The USEPA method 3051A showed greater efficiency in Hg extraction in soils with higher clay content. Therefore, it is suitable for situations where a wide range of soils with different mineralogical characteristics are analyzed or in order to decrease the losses due to volatilization of the element in open systems.     

Trace metal levels in fruit juices and carbonated beverages in Nigeria

Trace metal levels in selected fruit juices and carbonated beverages purchased in Lagos, Nigeria were determined using atomic absorption spectrophotometer (Unicam model 969) equipped with SOLAAR 32 windows software. Fruit juices analysed were grape, pineapple, apple, orange, lemon juices and their brand names were used. Some carbonated drinks were also evaluated for metal levels. Trace metals investigated were Cr, Cu, Pb, Mn, Ni, Zn, Sn, Fe, Cd and Co. Trace metal contents of fruit juices were found to be more than the metallic contents of carbonated beverages. Pb level in the fruit juices ranged from 0.08 to 0.57 mg/l but was not detected in the carbonated drinks. Concentrations of Pb in lemon juice and Mn in pineapple juice were relatively high. Cd and Co were not detected in the selected juices and beverages. Additionally, Pb, Cu, Cr and Fe were not detected in canned beverages but were present in bottled beverages. However, the metal levels of selected fruit juices and carbonated beverages were within permissible levels except for Mn in pineapple juice and Pb in lemon juice.     

Water Planning and Hydro-Climatic Change in the Murray-Darling Basin,Australia

More than a third of humanity lives in regions with less than 1 million liters of fresh water per person per year. Population growth will increase water demand while climate change in arid and semi-arid areas may reduce water availability. The Murray-Darling Basin in Australia is a region where water reform and planning have been used to reduce consumptive extraction to better sustain river ecosystems under climate variability. Using actual data and previously published models that account for climate variability and climate change, the trade-off between water extractions and water essential to the long-term ecological function of river systems is analysed. The findings indicate that better water planning and a more complete understanding of the effects of irrigation on regional climate evapotranspiration could: (1) increase the overall benefits of consumptive and non-consumptive water use; (2) improve riparian environments under climate variability; and (3) be achieved with only small effects on the profits and gross value of food and fiber production.     

Measurement of transferable chemical residue from nylon carpet using the California roller and a new mega-California roller

Human chemical exposures resulting from transfer of surface deposition on indoor nylon carpets may be estimated by measuring transferable residues (μ g chemical/cm² carpet). A weighted roller developed at California Department of Food and Agriculture (CDFA) has been extensively used to sample transferable residue for estimates of human exposure in risk characterization. A modified roller has been developed to evaluate the influence of pressure on transferable chemical residue since weight and force (or pressure, kg/m²) may vary person-to-person and activity-to-activity. A 30.5 cm diameter roller was used to apply 60 to 2100 kg/m² to bracket pressures exerted by humans on a flat nylon-carpeted surface. Measurements of transferable cyfluthrin residues were made after 1, 7, and 21 days. Total Soxhlet extractable cyfluthrin residues were relatively constant during the test period. Residue transferability decreased during the study period. Modest increases in the transferability of surface residues were observed over the broad range of pressures applied by the modified roller.