A MODELING APPROACH FOR OPTIMUM SEDIMENT DETENTION POND DESIGN1

ABSTRACT: A design procedure to determine optimum size for a sediment detention pond is presented. The procedure is based on simulating the sediment removal efficiency of the pond in conjunction with temporal variations in rainfall and potential land use and/or management options. The simulation procedure is based on a combined probabilistic-deterministic modeling approach. The probabilistic model generates daily rainfall with hourly increments for a selected site. The deterministic model simulates sediment yield and concentration for drainage area (pond inflow) and sediment trapping efficiency of the pond. The sediment yield and concentration in pond effluent is estimated from the difference between sediment inflow to the pond and sediment trapped by the pond. As an example, the procedure is applied to determine optimum design for a sediment detention pond in a surface mined area using several pond design options and alternative mining operation/land reclamation strategies.     

Face mask and medical waste generation in the City of Baguio,Philippines: its current management and GHG footprint

Journal of Material Cycles and Waste Management - The daily use of facemask to prevent virus transmission increases the negative effect on the environment because of improper waste disposal. Due to...     

Importance of cholinesterase kinetic parameters in environmental monitoring using estuarine fish

The aim of the present study was to determine the kinetic parameters and cholinesterase (ChE) activity in two teleost fish, the white mouth croaker Micropogonias furnieri (Scianidae) and the Madamango sea catfish Cathorops spixii (Ariidae), to verify their suitability as sentinel species of aquatic pollution by anticholinergic compounds. Individuals of each species were captured in one reference and one polluted site in the Southern Brazilian coast. Brain tissue was used as enzyme source. Inhibition kinetic parameters indicated that ChE from C. spixii collected at the reference site showed more affinity (Ka) for eserine that from those collected at the polluted site. The opposite was observed for the carbamylation constants (Kc). Thus, similar inhibition constants (Ki) were observed. M. furnieri brain showed an extremely low sensitivity to in vitro inhibition by eserine, indicating that it is not a suitable biomarker to be employed in environmental monitoring of anticholinergic compounds. Results from the present study also point to the need for considering kinetic analysis when cholinesterase activity is employed as a biomarker.     

Enhancement of chemical-oxygen demand and color removal of distillery spent-wash by ozonation.

Distillery spent-wash has very high organic content (75,000 to 125,000 mg/L chemical-oxygen demand [COD]), color, and contains difficult-to-biodegrade organic compounds. For example, anaerobic treatment of the distillery spent-wash used in this study resulted in 60% COD reduction and low color removal. Subsequent aerobic treatment of the anaerobic effluent resulted in enhancement of COD removal to 66%. In this paper, the effect of ozonation on various properties of the anaerobically treated distillery effluent, including the effect on its subsequent aerobic biodegradation, was investigated. Ozonation of the anaerobically treated distillery effluent at various ozone doses resulted in the reduction of total-organic carbon (TOC), COD, COD/TOC ratio, absorbance, color, and increase in the biochemical-oxygen demand (BOD)/COD ratio of the effluent. Further, ozonation of the anaerobically treated distillery effluent at an ozone dose of 2.08 mg/mg initial TOC and subsequent aerobic biodegradation resulted in 87.4% COD removal, as compared to 66% removal when ozonation was not used.     

Preparation and characterization of green bricks using pharmaceutical industrial wastes

This paper reports on recycling of industrial wastes (three pharmaceutical industrial sludges) into environmental friendly value-added materials. Stabilization/Solidification (S/S or bricks) process was applied to make a safer way for the utilization of pharmaceutical waste. The additives in this study include binders (cement, lime and bentonite) and strengthening material (pulverized fuel ash (PFA), silica fume and quarry dust) was used at different compositions. Bricks were cured for 28 days, and the following analysis-like compressive strength, leachability of heavy metals, mineralogical phase identity by X-ray diffraction (XRD) spectroscopy, Fourier transform infrared spectroscopy (FTIR) and thermal behaviour by thermogravimetric-differential thermal analysis (TG-DTA) had done. All the bricks were observed to achieve the standard compressive strength as required for construction according to BIS standards. Metal concentration in the leachate has reached the dischargeable limits according to Brazilian standards. Results of this study demonstrate that production of bricks is a promising and achievable productive use of pharmaceutical sludge.     

EuroBionet: a pan-European biomonitoring network for urban air quality assessment

EuroBionet, the 'European Network for the Assessment of Air Quality by the Use of Bioindicator Plants', is an EU-funded cooperative project currently consisting of public authorities and scientific institutes from 12 cities in 8 countries. In 2000, the bioindicator plants tobacco (Nicotiana tabacum Bel W3), poplar (Populus nigra 'Brandaris'), spiderwort (Tradescantia sp. clone 4430), Italian rye grass (Lolium multiflorum italicum) and curly kale (Brassica oleracea acephala) were exposed to ambient air at 90 monitoring sites according to standardised methods. Visible injuries and growth parameters were assessed and the accumulation of toxic substances in leaves determined. The exposure of tobacco resulted in a gradient with low levels of ozone-induced foliar injury in N and NW Europe, and medium to high values in the southern and central regions. The results of heavy metal and sulphur analyses in rye grass samples generally showed low to very low sulphur and low to medium heavy metal concentrations in leaves. In some cities, however, local hot spots of heavy metal contamination were detected. Analyses of the PAH contents in curly kale leaves gave low to medium values, with locally elevated levels at traffic-exposed sites.     

The Role of Industry

A series of partitioning agents were studied to determine their ability to separate organic sulfur compounds by gas chromatography. Several columns showed promise, but did not separate organic sulfur compounds from normally occurring atmospheric hydrocarbons. Higher concentrations of organic sulfur compounds in stack gases are separated as metallic salts in a series of impingers. The nature of the precipitated sulfur compound can be determined by gas chromatography after regeneration of the compound by addition of acid to the metallic precipitate.     

Influence of experimental conditions on manifestation of the group effect in the gypsy moth, <Emphasis Type="Italic">Lymantria dispar</Emphasis> L.

The effect of rearing conditions for gypsy moth larvae on parameters of their development (its duration and mortality) was studied in experiments with early instar larvae reared singly or in groups. The manifestation of the group effect was analyzed depending on the choice of experimental unit (the larva or the rearing container) and the amount of volume per larva. The observed effects were evaluated quantitatively.     

Delineating shallow saline groundwater zones from Southern India using geophysical indicators

A geophysical survey was conducted over an industrial belt encompassing 80 functional leather factories in Southern India. These factories discharge untreated effluents which pollute shallow groundwater where electrical conductivity (EC) value had a wide range between 545 and 26,600 μS/cm (mean, 3, 901 μS/cm). The ranges of Na⁺ and Cl^? ions were from 46 to 4,850 mg/L (mean, 348 mg/L) and 25 to 10,390 mg/L (mean, 1,079 mg/L), respectively. Geoelectrical layer parameters of 37 vertical electrical soundings were analyzed to demarcate fresh and saline water zones. However, the analysis not did lead to a unique resolution of saline and fresh waters. It was difficult to assign a definitive value to the aquifer resistivity of any area. Thus, geophysical indicators, namely longitudinal unit conductance (S), transverse unit resistance (T), and average longitudinal resistivity (R _s), were calculated for identifying fresh and saline waters. Spatial distributions of S, T, and R _s reflected widely varying ranges for the saline and fresh water zones. Further, the empirical relation of formation factor (F) was established from pore-water resistivity and aquifer resistivity for fresh and saline aquifers, which may be used to estimate local EC values from the aquifer resistivity, where well water is not available.     

On the ecology and biology of invasive species Cyclachaena xanthiifolia (Nutt.) Fresen. in the Southern Urals and Cisural region

Ecological and biological characteristics of Cyclachaena xanthiifolia (Nutt.) Fresen., have been studied in four regions of the Southern Urals and Cisural region. Communities including this species have been attributed to association Ivetum xanthiifoliae Fija?kowski 1967 of the class Stellarietea mediae R.Tx., Lohmeyer et Preising 1950. It has been shown that ecological habitat conditions have a significant effect on the majority of morphometric parameters of C. xanthiifolia, accounting for 1.3 to 51.4% of their total variance. Seed production averages 6500 seeds per plant. Extensive dispersal of the species over the Southern Ural region is predicted.