Cross-boundary transport of air pollution is a difficult issue in pollution control for the North China Plain. In this study, an industrial district (Shahe City) with a large glass manufacturing sector was investigated to clarify the relative contribution of fine particulate matter (PM2.5) to the city's high levels of pollution. The Nest Air Quality Prediction Model System (NAQPMS), paired with Weather Research and Forecasting (WRF), was adopted and applied with a spatial resolution of 5 km. During the study period, the mean mass concentrations of PM2.5, SO2, and NO2 were observed to be 132.0, 76.1, and 55.5 μg/m3, respectively. The model reproduced the variations in pollutant concentrations in Shahe at an acceptable level. The simulation of online source-tagging revealed that pollutants emitted within a 50-km radius of downtown Shahe contributed 63.4% of the city's total PM2.5 concentration. This contribution increased to 73.9±21.2% when unfavorable meteorological conditions (high relative humidity, weak wind, and low planetary boundary layer height) were present; such conditions are more frequently associated with severe pollution (PM2.5 ≥ 250 μg/m3). The contribution from Shahe was 52.3±21.6%. The source apportionment results showed that industry (47%), transportation (10%), power (17%), and residential (26%) sectors were the most important sources of PM2.5 in Shahe. The glass factories (where chimney stack heights were normally < 70 m) in Shahe contributed 32.1% of the total PM2.5 concentration in Shahe. With an increase in PM2.5 concentration, the emissions from glass factories accumulated vertically and narrowed horizontally. At times when pollution levels were severe, the horizontally influenced area mainly covered Shahe. Furthermore, sensitivity tests indicated that reducing emissions by 20%, 40%, and 60% could lead to a decrease in the mass concentration of PM2.5 of of 12.0%, 23.8%, and 35.5%, respectively. 相似文献
Phenols have been shown to influence the cellular proliferation and function of thyroid in experimental models. However, few human studies have investigated the association between phenol exposure and thyroid cancer, and the underlying mechanisms are also poorly understood. We conducted a case-control study by age- and sex-matching 143 thyroid cancer and 224 controls to investigate the associations between phenol exposures and the risk of thyroid cancer, and further to explore the mediating role of oxidative stress. We found that elevated urinary triclosan (TCS), bisphenol A (BPA) and bisphenol S (BPS) levels were associated with increased risk of thyroid cancer (all P for trends < 0.05), and the adjusted odds ratios (ORs) comparing the extreme exposure groups were 3.52 (95% confidence interval (CI): 2.08, 5.95), 2.06 (95% CI: 1.06, 3.97) and 7.15 (95% CI: 3.12, 16.40), respectively. Positive associations were also observed between urinary TCS, BPA and BPS and three oxidative stress biomarkers measured by 8-hydroxy-2′-deoxyguanosine (8-OHdG), 8-iso-prostaglandin F2α (8-isoPGF2α) and 4-hydroxy-2-nonenal-mercapturic acid (HNE-MA), as well as between urinary 8-isoPGF2α and HNE-MA and the risk of thyroid cancer. Mediation analysis showed that urinary 8-isoPGF2α mediated 28.95%, 47.06% and 31.08% of the associations between TCS, BPA and BPS exposures and the risk of thyroid cancer, respectively (all P < 0.05). Our results suggest that exposure to TCS, BPA and BPS may be associated with increased risk of thyroid cancer and lipid peroxidation may be an intermediate mechanism. Further studies are warranted to confirm the findings. 相似文献
The widespread contamination of water systems with antibiotics and heavy metals has gained much attention. Intimately coupled visible -light-responsive photocatalysis and biodegradation (ICPB) provides a novel approach for removing such mixed pollutants. In ICPB, the photocatalysis products are biodegraded by a protected biofilm, leading to the mineralization of refractory organics. In the present study, the ICPB approach exhibited excellent photocatalytic activity and biodegradation, providing up to ∼1.27 times the degradation rate of sulfamethoxazole (SMX) and 1.16 times the Cr(VI) reduction rate of visible-light-induced photocatalysis . Three-dimensional fluorescence analysis demonstrated the synergistic ICPB effects of photocatalysis and biodegradation for removing SMX and reducing Cr(VI). In addition, the toxicity of the SMX intermediates and Cr(VI) in the ICPB process significantly decreased. The use of MoS2/CoS2 photocatalyst accelerated the separation of electrons and holes, with•O2– and h+ attacking SMX and e– reducing Cr(VI), providing an effective means for enhancing the removal and mineralization of these mixed pollutants via the ICPB technique. The microbial community results demonstrate that bacteria that are conducive to pollutant removal are were enriched by the acclimation and ICPB operation processes, thus significantly improving the performance of the ICPB system. 相似文献
Abstract The accumulation of chlorophenols, including 2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TCP) and pentachlorophenol (PCP), from river sediments from southern Taiwan were studied. Through simple or more exhaustive extractions, the results showed that 99% of the samples containing 2,4,6-TCP and PCP could be removed by simple extraction. the concentrations were found to range from non-detectable to 16.60 ngg1 for 2,4,6-TCP and to 25.02 ngg1 for PCP. Partition coefficients (Kp) were 0.71, 0.74 mlg1 for 2,4,6-TCP, 1.35 and 1.41 mlg1 for PCP. Biodegradation by DCP-adapted or unadapted anaerobes in sediment was carried out. During 21 days' incubation, the complete degradation time for 2,4,6-TCP in DCP-adapted anaerobic, unadapted anaerobic, and unadapted aerobic conditions were found to be 9, 10, 12 days for N3 sediment, and 8, 10, 11 days for N6 sediment, respectively; for PCP it was 19 days, without degradation, 14 days for N3 sediment, and 13, 17, 10 days for N6 sediment, respectively. the biodegradable products were identified as 2,3,4,5-tetrachlorophenol (2,3,4,5-TeCP), 3,4,5-TCP, 3,5-DCP, 3-MCP, phenol, methylphenol, and benzoate for PCP, and 2,4-DCP, 4-MCP, phenol, methylphenol, and benzoate for 2,4,6-TCP. 相似文献
The phosphorus chemical industry is an important source of heavy metals in farmland. Vegetables grown on contaminated soil potentially impose adverse effects on human health. In this study, the pollution status and health risks of heavy metals in vegetables around a phosphorus chemical plant in Kaiyang County, Guizhou Province, southwestern China, were assessed, and the low-accumulation vegetables were screened by bioaccumulation factor (BAF) and cluster analysis. Results showed the average concentrations of Hg, As, Cd, Pb, Cr, Mn, Co, and Zn in vegetables were 0.015, 0.728 0.382, 0.227, 0.850, 27.227, 0.525, and 6.438 mg/kg, respectively. The single-factor pollution index showed that Cd was moderately polluted, and Cr, Hg, As, and Pb were slightly polluted. The Nemerow pollution index showed that the overall heavy metal pollution was classified as moderately polluted. The accumulation of heavy metals in different vegetables varied greatly, and chard, crown daisy, chayote, pumpkin, eggplant, white radish, sweet potato, carrot, and potato were selected as the low-accumulator vegetables. The consumption of all vegetables except chayote poses both carcinogenic and noncarcinogenic risks; among them, the consumption of sweet potato leaves has the highest health risks. The local population needs to adjust plantation structure and change dietary habits, and government should strengthen the management of phosphorus chemical plant pollution.
Environmental Science and Pollution Research - Nitrite oxidation as the second step of nitrification can become the determining step in disturbed soil systems. As a beneficial fertilization... 相似文献