Management of disease complex caused by root knot nematode and root wilt fungus on pigeonpea through soil organically enriched with Vesicular Arbuscular Mycorrhiza, karanj (Pongamia pinnata) oilseed cake and farmyard manure

This investigation was undertaken to compare the percentage response of colonization and development of VA-Mycorrhiza (Glomus fasciculatum) on a number of pulse crops viz. cowpea, chickpea, soybean, pigeonpea and lentil under glasshouse conditions. Among the above-mentioned crops, pigeonpea exhibited the best performance and was selected for further studies. In this host the development and colonization percentage of G. fasciculatum was investigated under two separate substrates i. e. soil amended with FYM and karanj oilseed cake keeping a control treatment of field soil. A third treatment amended with karanj oilseed cake and farm yard manure (FYM) was also kept which responded best in terms of colonization percentage. This treatment showing improved plant health as well as integration with G. fasciculatum was selected as an ideal treatment for the management of disease complex caused by root knot nematode, Meloidogyne incognita and root wilt fungus, Fusarium udum on pigeonpea. Thus the treatment constituting FYM, karanj oilseed cake and VA-Mycorrhiza reduced the disease incidence caused by both maladies to a great extent with the most promising improvement in plant growth parameters as compared to all others. The present investigation, in addition to proposing an ideal eco-friendly treatment for the management of this disease complex also proposed an excellent medium for the proliferation of the obligate bio-protectant, G. fasciculatum.     

Nickel recovery from spent nickel catalyst.

A process for nickel recovery from a spent catalyst of definite composition has been developed using the hydro-metallurgical route. The processing steps includes direct sulphuric acid leaching followed by separation of iron as well as silica and other impurities. For a 152 microm particle size catalyst, extraction of about 98% nickel was achieved at 363 K in 2 h using a sulphuric acid concentration (v/v) of 8% and a pulp density of 10%. The dissolution of nickel followed diffusion-controlled leaching kinetics. Increase in temperature and sulphuric acid concentration resulted in increase in the nickel recovery. The activation energy for nickel dissolution was calculated to be 62.8 kJ mol(-1). Finally, nickel was recovered as value-added products such as sulphide and oxalate with overall recovery of 90 and 88% of nickel, respectively.     

Revegetating fly ash landfills with Prosopis juliflora L.: impact of different amendments and Rhizobium inoculation

A revegetation trial was conducted to evaluate the feasibility of growing a legume species, Prosopis juliflora L., on fly ash ameliorated with combination of various organic amendments, blue-green algal biofertilizer and Rhizobium inoculation. Significant enhancements in plant biomass, photosynthetic pigments, protein content and in vivo nitrate reductase activity were found in the plants grown on ameliorated fly ash in comparison to the plants growing in unamended fly ash or garden soil. Higher growth was obtained in fly ash amended with blue-green algae (BGA) than farmyard manure or press mud (PM), a waste from sugar-processing industry, due to the greater contribution of plant nutrients, supply of fixed nitrogen and increased availability of phosphorus. Nodulation was suppressed in different amendments of fly ash with soil in a concentration-duration-dependent manner, but not with other amendments. Plants accumulated higher amounts of Fe, Mn, Cu, Zn and Cr in various fly ash amendments than in garden soil. Further, inoculation of the plant with a fly ash tolerant Rhizobium strain conferred tolerance for the plant to grow under fly ash stress conditions with more translocation of metals to the above ground parts. The results showed the potential of P. juliflora to grow in plantations on fly ash landfills and to reduce the metal contents of fly ash by bioaccumulation in its tissues.     

Heavy Metal Accumulation in Lichens from the Hetauda Industrial Area Narayani Zone Makwanpur District, Nepal

Lichen samples collected in and around Hetauda Industrial area,(HIA) Narayani zone, Makwanpur district, Nepal, were analyzedfor Cr, Ni, Pb, Zn, Ca, Mn, Fe, Si, and Al. The samples fromthe location inside the industrial area have higher levels ofmetal than the outside areas. Pyxine meissnerina growinginside the industrial area accumulated higher levels of all themetals analyzed.     

Mining and the environment: a case study from Bijolia quarrying site in Rajasthan, India

Mining is essentially a destructive developmental activity, where ecology suffers at the altar of economy. Unfortunately, in most regions of the Earth, the underground geological resources are superimposed by biological resources (forests). This is particularly evident in India. Hence mining operations necessarily involve deforestation, habitat destruction, biodiversity erosion and destruction of geological records which contain information about past biodiversity. Extraction and the processing of ores and minerals also lead to widespread environmental pollution.However, mankind cannot afford to give up the underground geological resources which are the basic raw materials for development. An unspoiled nature can provide ecological security to people but cannot bring economic prosperity. Scientific mining operations accompanied by ecological restoration and regeneration of mined wastelands and judicious use of geological resources, with search for eco-friendly substitutes and alternatives must provide the answer.A case study from the Bijolia quarrying area in Rajasthan, India, provides some sensational revelations of the impact of mining on the human ecosystem.     

Microbial decolorization and bioremediation of melanoidin containing molasses spent wash

Molasses spent wash from cane-molasses based distilleries contains a brown coloured recalcitrantpolymer melanoidin, which if disposed untreated poses a great threat to environment. Microbial decolorization and chemical oxygen demand (COD) reduction was found to be dependent on specific carbon and nitrogen source. Under optimal condition of pH, carbon and nitrogen concentration for each treatment, it was found that Bacillus sp isolated from soil was capable of removing COD (85. 35%) and colour (81.10%) from distillery waste to the maximum extent after 9 days atpH 7 in the medium containing 0.5% peptone, 2% glucose and 10% (v/v), followed by Phanerochaete chrysosporium and lowest reduction was obtained by using native microbial consortium.     

Impact of cadmium and lead on Catharanthus roseus--a phytoremediation study

The Madagascar Periwinkle, Catharanthus roseus (L.) G. Don (a valued medicinal plant) was exposed to different concentrations ofheavymetals like, CdCl, and PbCl, with a view to observe their bioaccumulation efficiency. Germination was inhibited by both the heavy metals in the seeds previously imbibed in GA, and KNO, for 24 hr. EC50 (the effective concentration which inhibits root length by 50%) was recorded as 180 microM for CdCl2, and 50 microM for PbCl2. Both alpha-amylase and protease activity were reduced substantially on treatment of seeds with increasing concentrations of CdCl2, and PbCl2. Malondialdehyde (MDA) a product of lipoxigenase (LOX) activity also increased due to the treatment of both CdCl, and PbCl2. When two-months-old plants grown in normal soil were transferred to soils containing increasing amounts of these two heavy metals, senescence of lower leaves and extensive chlorosis were noticed after four days of transfer However, plants gradually acclimatized and after 20 days the chlorophyll content was almost comparable to normal. Plants receiving CdCl2 treatment (250 microg g(-1) and less) became acclimatized after two weeks and started normal growth. But PbCl2 of 432 microg g(-1) and less could not affect the plant growth throughout, after a preliminary shock was erased. In case of CdCl2 treatment, a stunted growth with reduced leaf area, reduced biomass and sterility were recorded after six months, while plants show normal growth and flowering in case of PbCl2 treatment. Total alkaloid was also found to be decreased in the roots of CdCl2 treated plants. No change was observed in case of PbCl2. GA3 treatments to the CdCl2 treated plants show internode elongation and increase in leaf area with relatively elongated leaves and thinning of stem diameter AAS analyses of leaves of treated plants exhibited 5-10% accumulation of cadmium, but there was no accumulation of lead at all.     

Detecting Extinction Risk from Climate Change by IUCN Red List Criteria

Anthropogenic climate change is a key threat to global biodiversity. To inform strategic actions aimed at conserving biodiversity as climate changes, conservation planners need early warning of the risks faced by different species. The IUCN Red List criteria for threatened species are widely acknowledged as useful risk assessment tools for informing conservation under constraints imposed by limited data. However, doubts have been expressed about the ability of the criteria to detect risks imposed by potentially slow‐acting threats such as climate change, particularly because criteria addressing rates of population decline are assessed over time scales as short as 10 years. We used spatially explicit stochastic population models and dynamic species distribution models projected to future climates to determine how long before extinction a species would become eligible for listing as threatened based on the IUCN Red List criteria. We focused on a short‐lived frog species (Assa darlingtoni) chosen specifically to represent potential weaknesses in the criteria to allow detailed consideration of the analytical issues and to develop an approach for wider application. The criteria were more sensitive to climate change than previously anticipated; lead times between initial listing in a threatened category and predicted extinction varied from 40 to 80 years, depending on data availability. We attributed this sensitivity primarily to the ensemble properties of the criteria that assess contrasting symptoms of extinction risk. Nevertheless, we recommend the robustness of the criteria warrants further investigation across species with contrasting life histories and patterns of decline. The adequacy of these lead times for early warning depends on practicalities of environmental policy and management, bureaucratic or political inertia, and the anticipated species response times to management actions. Detección del Riesgo de Extinción a partir del Cambio Climático por medio del Criterio de la Lista Roja de la UICNKeith et al.     

Modelling fertility: an application of count regression models

Often the lifecycle data occur as count of the vital events and are recorded as integers. The purpose of this article is to model the fertility behavior based on religious, educational, economic, and occupational characteristics. The responses of classified groups according to these determinants are examined for significant influence on fertility using Poisson regression model (PRM) based on the National Family Health Survey -3 dataset. The observed and predicted probabilities under PRM indicate modal value of two children for the Poisson distribution modeled data. Presence of dominance of two child in the data motivates the authors to adopt multinomial regression model (MRM) in order to link fertility with various socioeconomic indicators responsible for fertility variation. Choice of the explanatory factors is limited to the availability of data. Trends and patterns of preference for birth counts suggest that religion, caste, wealth, female education, and occupation are the dominant factors shaping the observed birth process. Empirical analysis suggests that both the models used in the study perform similarly on the sample data. However, fitting of MRM by taking birth count of two as comparison category shows improved Akaike information criterion and consistent Akaike information criterion values. Current work contributes to the existing literature as it attempts to provide more insight into the determinants of Indian fertility using Poisson and MRM.     

Study of ultrasonic assisted cryogenically cooled EDM process using sintered (Cu–TiC) tooltip

In most EDM operations, the maximum contribution in the total operation cost is the tool cost. Electrode wear is a major problem in EDM process. Therefore, in this paper, the process performance of sintered copper (Cu)–titanium carbide (TiC) electrode tip in ultrasonic assisted cryogenically cooled electrical discharge machining (UACEDM) has been studied. The performance parameters studied in this paper are electrode wear ratio (EWR), material removal rate (MRR), surface roughness (SR), out of roundness and surface integrity. The process parameters considered in this study are discharge current, pulse on time, duty cycle and gap voltage. Cermet was fabricated, having copper content of 75% and titanium carbide content of 25%, by mixing, pressing, and sintering. The performance of the newly formed cermet electrode tip is compared with conventional copper electrode tip for UACEDM process and analyzed. It has been observed that EWR and out of roundness decreases when cermet electrode tip is used as compared to conventional tooltip. It has also been observed that MRR and SR increase when cermet tooltip is used. The surface cracks density and crack width on workpiece machined by cermet tooltip have been found to be lesser as compared to the specimen machined by conventional tooltip.