Assessment of anticipated performance index of some deciduous plant species under dust air pollution

Environmental Science and Pollution Research - Green vegetation improvement is an economical strategy to mitigate dust air pollution. The anticipated performance index (API) is considered a main...     

Distribution of Metals in the Edible Plants Grown at Jajmau, Kanpur (India) Receiving Treated Tannery Wastewater: Relation with Physico-Chemical Properties of the Soil

The implications of metal contamination of agricultural soils due to long term irrigation with treated industrial wastewater and their subsequent accumulation in the vegetables/crops growing on such soils has been assessed in an area of industrial complex, Jajmau, Kanpur (India). Physico-chemical properties of the soil were also studied. The soil and vegetables/crops were sampled from an area of 2100 acre agricultural land and analyzed for physico-chemical properties and metal accumulation in different parts of the plants. The comparison of the data of physico-chemical properties of control and contaminated soil showed that salinity, electrical conductivity, available phosphorous, sodium and potassium content (both water soluble and exchangeable) were found high in contaminated soil. The analysis of plant available metal content in the soil showed the highest level of Fe, which ranged from 529.02 to 2615 μg g⁻¹ dw and lowest level of Ni (3.12 to 10.51 μg g⁻¹ dw). The analysis of the results revealed that accumulation of toxic metal Cr in leafy vegetables was found more than fruit bearing vegetables/crops. Thus, it is recommended that the leafy vegetables are unsuitable to grow in such contaminated sites. It is important to note that toxic metal, Ni was not detected in all the plants. The edible part of the vegetables (under ground) such as, garlic (19.27 μg g⁻¹ dw), potato (11.81 μg g⁻¹ dw) and turmeric (20.86 μg g⁻¹ dw) has accumulated lowest level of toxic metal, Cr than leafy and fruit bearing vegetables. In some fruit part of vegetables such as, bitter gourd, egg plant, jack tree, maize and okra, the accumulation of Cr was not detected and may be grown in this area.     

Pattern of Hexa-Valent Chromium in Air Borne Respirable Dust Generated at Various Workplaces in Opencast Chromite Mines

The paper presents a study into air borne respirable dust (ARD) concentration at various workplaces in two open cast chromite mines of Sukinda chromite belt, India. One of these mines is mechanised and the other one is semi-mechanised. The study has been conducted in three phases and ARD concentration has been measured at various workplaces in both the mines. Apart from the determination of ARD concentration, the dust samples collected on filter papers were analysed for hexa-valent chromium by colorimetric method and Cr(VI) direct absorption measurement. In addition, the particle size ranges in ARD have been determined by using cascade impactor fitted onto high volume samplers and laser guided particle size analyser. The paper finally presents a comparison between ARD concentration vis-à-vis the presence of hexa-valent chromium concentration in collected samples of both mechanised and semi-mechanised mines.     

Geospatial strategy for sustainable management of municipal solid waste for growing urban environment

This paper presents the implementation of a Geospatial approach for improving the Municipal Solid Waste (MSW) disposal suitability site assessment in growing urban environment. The increasing trend of population growth and the absolute amounts of waste disposed of worldwide have increased substantially reflecting changes in consumption patterns, consequently worldwide. MSW is now a bigger problem than ever. Despite an increase in alternative techniques for disposing of waste, land-filling remains the primary means. In this context, the pressures and requirements placed on decision makers dealing with land-filling by government and society have increased, as they now have to make decisions taking into considerations environmental safety and economic practicality. The waste disposed by the municipal corporation in the Bhagalpur City (India) is thought to be different from the landfill waste where clearly scientific criterion for locating suitable disposal sites does not seem to exist. The location of disposal sites of Bhagalpur City represents the unconsciousness about the environmental and public health hazards arising from disposing of waste in improper location. Concerning about urban environment and health aspects of people, a good method of waste management and appropriate technologies needed for urban area of Bhagalpur city to improve this trend using Multi Criteria Geographical Information System and Remote Sensing for selection of suitable disposal sites. The purpose of GIS was to perform process to part restricted to highly suitable land followed by using chosen criteria. GIS modeling with overlay operation has been used to find the suitability site for MSW.     

Identification and analysis of polyaromatic hydrocarbons (PAHs)—biodegrading bacterial strains from refinery soil of India

Polyaromatic hydrocarbons (PAHs) utilizing bacteria were isolated from soils of seven sites of Mathura refinery, India. Twenty-six bacterial strains with different morphotypes were isolated. These strains were acclimatized to utilize a mixture of four polycyclic aromatic hydrocarbons, i.e., anthracene, fluorene, phenanthrene, and pyrene, each at 50 mg/L concentration as sole carbon source. Out of total isolates, 15 potent isolates were subjected to 16S rDNA sequencing and identified as a member of diverse genera, i.e., Bacillus, Acinetobacter, Stenotrophomonas, Alcaligenes, Lysinibacillus, Brevibacterium, Serratia, and Streptomyces. Consortium of four promising isolates (Acinetobacter, Brevibacterium, Serratia, and Streptomyces) were also investigated for bioremediation of PAH mixture. This consortium was proved to be efficient PAH degrader resulting in 40–70 % degradation of PAH within 7 days. Results of this study indicated that these genera may play an active role in bioremediation of PAHs.     

Applicability of high rate transpiration system for treatment of biologically treated distillery effluent

The biologically treated distillery effluent (BTDE) contains intense colour, high total dissolved solids (TDS), chemical oxygen demand (COD) and biochemical oxygen demand (BOD). These properties even after primary, secondary and tertiary treatments contain high concentrations of TDS, COD and BOD. The paper highlights the safe disposal and treatment of BTDE on land through High Rate Transpiration System (HRTS). HRTS is a zero discharge, low cost, high-tech method for improving the quality of BTDE for potential reuse. The experiments conducted at bench and pilot scale showed that HRTS having coconut husk as a bedding material could successfully treat the BTDE with a hydraulic load of 200 m³ ha⁻¹ day⁻¹ having BOD of 100 mg l⁻¹ and 500 m³ ha⁻¹ day⁻¹ having BOD of 500 mg l⁻¹ with average COD load of 0.686 and 2.88 ton ha⁻¹ day⁻¹ during the post and pre monsoon periods respectively. There was no significant increase in the organic carbon of the soil irrigated with BTDE. The concentrations of various pollutants analyzed in the leachate were within the prescribed limit for the drinking water sources. The colour removal was 99 to 100% and BOD and COD were possible to treat with optimum hydraulic loading of BTDE through HRTS planted with Dendrocalamus strictus.     

Concentrations of heavy metals and aquatic macrophytes of Govind Ballabh Pant Sagar an anthropogenic lake affected by coal mining effluent

Five heavy metals Cu, Cd, Mn, Pb and Hg were found in high concentration from three sampling sites located in Asia’s largest anthropogenic lake Govind Ballabh Pant GBP Sagar. Concentrations of these heavy metals were measured in Water, bottom sediment and in different parts of the aquatic macrophytes collected from the reservoir. Plants collected from the lake were Eichhornia crassipes, Azolla pinnata, Lemna minor, Spirodela polyrrhiza, Potamogeton pectinatus, Marsilea quadrifolia, Pistia stratiotes, Ipomea aquqtica, Potamogeton crispus, Hydrilla verticillata and Aponogeton natans. These plants have shown the high concentrations of Cu, Cd, Mn, Pb and Hg in their different parts due to bioaccumulation. In general plant roots exhibited higher concentrations of heavy metals than corresponding sediments. A comparison between different morphological tissues of the sampled plants reveled the metal concentration in following order roots > leaves. Analyses of bottom sediment indicated the higher concentrations of Cd, Mn, Cu and Pb. Strong positive correlations were obtained between the metals in water and in plants as well as between metal in sediment and in plants. Indicating the potential of these plants for pollution monitoring of these metals.     

Cellular uptake and mutagenic potential of metal oxide nanoparticles in bacterial cells

Extensive production and consumption of nanomaterials such as ZnO and TiO₂ has increased their release and disposal into the environment. The accumulation of nanoparticles (NPs) in ecosystem is likely to pose threat to non-specific targets such as bacteria. The present study explored the effect of ZnO and TiO₂ NPs in a model bacterium, Salmonella typhimurium. The uptake of ZnO and TiO₂ bare NPs in nano range without agglomeration was observed in S. typhimurium. TEM analysis demonstrated the internalization and uniform distribution of NPs inside the cells. Flow cytometry data also demonstrates that both ZnO and TiO₂ NPs were significantly internalized in the S. typhimurium cells in a concentration dependent manner. A significant increase in uptake was observed in the S. typhimurium treated even with 8 and 80 ng mL⁻¹ of ZnO and TiO₂ NPs with S9 after 60 min, possibly the formation of micelles or protein coat facilitated entry of NPs. These NPs exhibited weak mutagenic potential in S. typhimurium strains TA98, TA1537 and Escherichia coli (WP2uvrA) of Ames test underscoring the possible carcinogenic potential similar to certain mutagenic chemicals. Our study reiterates the need for re-evaluating environmental toxicity of ZnO and TiO₂ NPs presumably considered safe in environment.     

The Indian perspective of utilizing fly ash in phytoremediation, phytomanagement and biomass production

Coal-based power generation is a principal source of electricity in India and many other countries. About 15–30% of the total amount of residue generated during coal combustion is fly ash (FA). FA is generally alkaline in nature and contains many toxic metals like Cr, Pb, Hg, As and Cd along with many essential elements like S, B, Ca, Na, Fe, Zn, Mn and P. Dumped FA contaminates the biosphere by mobilization of its fine particles and hazardous metals. Despite the negative environmental impact of FA, coal continues to be a major source of power production in India and therefore FA disposal is a major environmental issue. To overcome this problem, FA dumping sites have been started as a potential resource for biomass production of tree species. Phytoremediation is a strategy that uses plants to degrade, stabilize, and remove contaminants from soils, water and waste FA. Phytomanagement of FA is based on the plants' root systems, high biomass, woody nature, native nature, and resistance to pH, salinity, and toxic metals. Recently Indian researchers mostly from the National Botanical Research Institute have been working on phytoremediation and revegetation of FA dykes, inoculation of bacterial strains for reducing FA stress and biomass production from FA dykes. Many international researchers have worked on reclamation, revegetation and utilization of FA. FA utilization saves resources, mainly land (topsoil), water, coal, limestone and chemical fertilizer. Safe utilization of FA is a major concern around the world and regulatory bodies are enforcing stringent rules for the proper management of FA. This article summarizes various viable avenues in India for FA utilization and environmental management.     

Assessing links between crop diversity and food self-sufficiency in three agroecological regions of Nepal

Increasing on-farm crop diversity is one agroecological approach to enhancing food self-sufficiency that helps small-scale farmers keep their food systems stable by reducing risks associated with stressors, such as a pest outbreaks or droughts. But understanding how crop diversity and food self-sufficiency are related is unknown. To explore this complex relation, this study presents household data (n = 1664) from Nepal to test the hypothesis that families with high crop diversity enjoy greater household food self-sufficiency. Data are presented for three districts that are representative of three distinct agroecological regions of the country: (1) Sarlahi, which is affluent, market-oriented, and on the plains; (2) Makwanpur District in the hills, which has well-developed integrated farm production; and (3) the mountainous District of Humla, which has the poorest quality environment and is the most remote. Results show that in the Humla District, families with greater crop diversity were more self-sufficient. In contrast, farmers in Makwanpur, who have already established a high degree of crop diversity based on vegetable production, do not benefit from additional crop diversity in terms of their ability to provide for themselves. Finally, data from Sarlahi show that families’ food self-sufficiency benefits from crop diversification. We conclude that boosting crop diversity is a viable strategy for maintaining stability in food systems, but this varies depending on the accessibility of a farm and, in particular, access to markets.