The effects of drainage basin geomorphometry on minimum low flow discharge: the study of small watershed in Kelang River Valley in Peninsular Malaysia

This study investigate the relationships between genomorphometric properties and the minimum low flow dischare of undisturbed drainage basins in the Taman BukitCahaya Seri Alam Forest Reserve,Peninsular Malaysia.The drainage basins selected were third-order basins so as to facilitate a common base for sampling and performing an unbiased statistical analyses.Three levels of relationships were observed in the study.Significant relationships exised between the genomorphometric properties as shown by the correlation network analysis;secondly,individual geomorphometric properties were observed to influence minimum flow discharge;and finally,the multiple regression model set up showed that minimum flow discharge(Qnub)was dependent of basin area(AU),stream length(LS),maximum relief(Hmax),average relief (HAV) and stream frequency(SF).These findings further enforced other studies of this nature that drainage basins were dynamic and functional entities whose operations were governed by complex interrelationships occurring within the basins.Changes to any of the geomorphometric properties would influence their role as basin regulators thus influencing a change in basin response.In the case of the basin‘s minimum low flow,a change in any of the properties considered in the regression model influenced the “time to peak”of flow.A shorter time period would mean higher discharge,which is generally considered the prerquisite to flooding.This research also conclude that the role of geomorphometric properties to control the water supply within the stream through out the year even though during the drought and less precipitations months .Drainage basins are sensitive entities and any deterioratons involve will generate reciprocals and response to water supply as well as the habitat within the areas.     

Waste management strategies for concrete

Recycling and reuse of waste such as building rubble, concrete lumps, etc. generated at construction and demolition sites form part of a wider, complex issue, primarily relating to improving supplies of construction material and solving problems of disposal of waste construction material. Within the framework of the sustainable development of the environment, the use of waste materials with minimum environmental impact has received much attention. The conversion of a large amount of demolished waste into an alternative resource will conserve the depleting natural resources of building materials. Demolished waste is mainly used as a non-stabilized base or sub-base in highway construction. The present paper discusses the recycling process and makes an effort to assess a safe and economic use of recycled concrete as a structural grade material for the construction industry. Extensive tests of structural properties such as compressive strength, flexural strength and split tensile strength of recycled concrete were carried out, in which cement and similarly fine aggregate were partially replaced by demolished waste to obtain recycled concrete and recycled aggregate concrete whose properties were compared with results for the conventional concrete.     

Heavy metal contamination in water, soil, and vegetables of the industrial areas in Dhaka, Bangladesh

Concentrations of Cu, Zn, Pb, Cr, Cd, Fe, and Ni have been estimated in soils and vegetables grown in and around an industrial area of Bangladesh. The order of metal contents was found to be Fe > Cu > Zn > Cr > Pb > Ni > Cd in contaminated irrigation water, and a similar pattern Fe > Zn > Ni > Cr > Pb > Cu > Cd was also observed in arable soils. Metal levels observed in different sources were compared with WHO, SEPA, and established permissible levels reported by different authors. Mean concentration of Cu, Fe, and Cd in irrigation water and Cd content in soil were much above the recommended level. Accumulation of the heavy metals in vegetables studied was lower than the recommended maximum tolerable levels proposed by the Joint FAO/WHO Expert Committee on Food Additives (1999), with the exception of Cd which exhibited elevated content. Uptake and translocation pattern of metal from soil to edible parts of vegetables were quite distinguished for almost all the elements examined.     

Recruiting chemical grafting method for surface modification of stainless steel to fabricate a selective sorbent for solid phase microextraction of mercury metal ion

Environmental Science and Pollution Research - Keeping selectiveness and efficiency in view with solid-phase microextraction (SPME) of metal ions, this work was aimed at synthesis of a novel...     

Antibiofouling hollow-fiber membranes for dye rejection by embedding chitosan and silver-loaded chitosan nanoparticles

Environmental Chemistry Letters - The removal of toxic dyes from the wastewater and industrial effluents is a major environmental challenge. Various techniques have been employed for the removal of...     

Engineered biochar composites with zeolite,silica, and nano-zerovalent iron for the efficient scavenging of chlortetracycline from aqueous solutions

Date palm waste–derived biochar (DBC) was produced through pyrolysis (600 °C) and modified with zeolite (Z-DBC), silica (S-DBC), or nano-zerovalent iron (nZVI-DBC) to design efficient sorbents. The pristine and engineered biochars were characterized by SEM, XRD, BET, TGA, CHNS-O, and FTIR to investigate the surface, structural, and mineralogical composition. The nZVI-DBC exhibited lowest pH (6.15) and highest surface area (220.92 m² g⁻¹), carbon (80.55%), nitrogen (3.78%), and hydrogen (11.09%) contents compared with other biochars. Isotherm sorption data for chlortetracycline (CTC) removal from aqueous solutions was described well by Langmuir and Redlich–Peterson isotherms showing the highest fitness (R² values in the range of 0.88–0.98 and 0.88–0.99, respectively). Langmuir predicted maximum CTC adsorption capacity was in order of nZVI-DBC (89.05 mg g⁻¹) > S-DBC (45.57 mg g⁻¹) > Z-DBC (30.42 mg g⁻¹) > DBC (28.19 mg g⁻¹). Kinetics adsorption data was best described by power function model (R² = 0.93–0.99), followed by interaparticle diffusion (R² = 0.85–0.96) model. The nZVI-DBC performed outclass by removing 98% of CTC, followed by S-DBC (68%), Z-DBC (35%), and DBC (36%). Chemisorption, H-bonding, and interaparticle diffusion were the operating mechanisms for CTC adsorption onto DBC, S-DBC, and Z-DBC, while π-π electron donor–accepter interactions and redox reactions augmented these mechanisms for highest CTC adsorption onto nZVI-DBC. Therefore, nZVI-DBC may serve as an efficient green technology for the removal of CTC from aqueous solutions and to reduce surface date palm waste pollution.

.

     

Dairy wastewater treatment using water treatment sludge as coagulant: a novel treatment approach

The dairy industry is among the most polluting industries as it produces large volume of wastewater that may adversely affect the environment if discharged untreated. Dairy wastewater is characterized by high COD, BOD and nutrient levels. In this study, water treatment sludge was used as a coagulant for the treatment of synthetic dairy wastewater in the pH range of 4–10. Turbidity, COD, BOD, TSS and TDS removals from the synthetic dairy wastewater were found to be around 93, 65, 67, 84 and 85%, respectively, at the optimum conditions. Water treatment sludge was found to perform even better than other conventional coagulants used for the same. Results showed that it has the potential to substitute the conventional coagulants partially or fully in the primary treatment of dairy wastewater. The utilization of water treatment sludge at dairy wastewater treatment plants would provide sustainable sludge management and cost-effective dairy wastewater treatment.     

Vehicular stress a cause for heavy metal accumulation and change in physico-chemical characteristics of road side soils in Pahalgam

In an effort to determine vehicular impact on soil quality, soil samples were collected from three different zones (Pahalgam, Batakote, and Chandanwari) in Pahalgam forest ecosystem. Results showed that a significant decrease in moisture content, organic carbon, available nitrogen, and potassium was observed in nearby road side soils. However, pH was observed to be on neutral side and available phosphorus recorded high concentration. The concentration of heavy metals Pb²⁺, Cu²⁺, Zn²⁺, Ni²⁺, and Cd²⁺ estimated was also significantly high. Furthermore, concentration of Pb²⁺ at high vehicular load subzones was observed to be highest (1.168 mg/Kg) followed by Zn²⁺ (0.896 mg/Kg), Ni²⁺ (0.649 mg/Kg), Cu²⁺ (0.415 mg/Kg), and Cd²⁺ (0.079 mg/Kg). An inter-zone analysis revealed that the concentration of the heavy metals (Pb²⁺?>?Ni²⁺?>?Cd²⁺) was observed to follow the trend, Z-I?>?Z-II?>?Z-III. Variation along the temporal gradient and the impact on soil qualities were notably higher in summer. Vehicular pollution to a great extent impacts physico-chemical characteristics and more interestingly adds substantial concentration of heavy metals in soils.     

Measuring the association of environmental,corporate, financial,and social CSR: evidence from fuzzy TOPSIS nexus in emerging economies

Environmental Science and Pollution Research - The purpose of this research is to measure the combing impact of corporate social responsibility on company performance and to conduct a comparative...     

Growth and properties of hydrothermally derived crystalline ZnSe quantum dots

Environmental Science and Pollution Research - Chalcogenide nanostructures are the materials with diverse applications. Here, we report rapid hydrothermal synthesis of crystalline ZnSe quantum dots...