Complexing Capacity of Thermal Waters of Montecatini Terme (Italy)

Two typical waters from thermal springs of Montecatini Terme-used as therapeutical beverages-exhibit a small complexing capacity towards Cu²⁺. By differential pulse anodic stripping voltammetry the following values were found: 0.46 μmol 1^-1 and 0.10 μmol 1^-1, respectively for Regina and Rinfresco waters.

Owing to the presence of a small amount of complexed copper in the original samples, the complexing capacity has to be regarded as residual capacity. In bottled waters from the same springs no complexing capacity was detected. Values of formation constants for copper complexes are given. No residual complexing capacity for Cu²⁺ was displayed for Tamerici and Tettuccio thermal waters.     

Chemical composition and Zn bioavailability of the soil solution extracted from Zn amended variable charge soils

A study on variable charge soils (volcanic Italian and podzolic Scottish soils) was performed to investigate the influence of soil properties on the chemical composition of soil solution. Zinc speciation, bioavailability and toxicity in the soil solution were examined. The soils were spiked with increasing amounts of Zn (0, 100, 200, 400 and 1000 mg/kg) and the soil solutions were extracted using rhizon soil moisture samplers. The pH, total organic carbon (TOC), base cations, anions, total Zn and free Zn2+ in soil solution were analysed. A rapid bioassay with the luminescent bacterium Escherichia coli HB101 pUCD607 was performed to assess Zn toxicity. The influence of soil type and Zn treatments on the chemical composition of soil solution and on Zn toxicity was considered and discussed. Di erent trends of total and free Zn concentrations, base cations desorption and luminescence of E. coli HB101 pUCD607 were observed. The soil solution extracted from the volcanic soils had very low total and free Zn concentrations and showed specific Zn2+/Ca2+ exchange. The soil solution from the podzolic soil had much higher total and free Zn concentrations and showed no evidence of specific Zn2+/Ca2+ exchange. In comparison with the subalkaline volcanic soils, the acidic podzol showed enhanced levels of toxic free Zn2+ and consequently stronger effects on E. coli viability.     

Quantitative cancer risk assessment and local mortality burden for ambient air pollution in an eastern Mediterranean City

Health risks posed by ambient air pollutants to the urban Lebanese population have not been well characterized. The aim of this study is to assess cancer risk and mortality burden of non-methane hydrocarbons (NMHCs) and particulates (PM) based on two field-sampling campaigns conducted during summer and winter seasons in Beirut. Seventy NMHCs were analyzed by TD-GC-FID. PM_2.5 elemental carbon (EC) components were examined using a Lab OC-EC aerosol Analyzer, and polycyclic aromatic hydrocarbons were analyzed by GC-MS. The US EPA fraction-based approach was used to assess non-cancer hazard and cancer risk for the hydrocarbon mixture, and the UK Committee on Medical Effects of Air Pollutants (COMEAP) guidelines were followed to determine the PM_2.5 attributable mortality burden. The average cumulative cancer risk exceeded the US EPA acceptable level (10⁻⁶) by 40-fold in the summer and 30-fold in the winter. Benzene was found to be the highest contributor to cancer risk (39–43%), followed by 1,3-butadiene (25–29%), both originating from traffic gasoline evaporation and combustion. The EC attributable average mortality fraction was 7.8–10%, while the average attributable number of deaths (AD) and years of life lost (YLL) were found to be 257–327 and 3086–3923, respectively. Our findings provide a baseline for future air monitoring programs, and for interventions aiming at reducing cancer risk in this population.

     

Occurrence of imidacloprid,carbendazim, and other biocides in Italian house dust: Potential relevance for intakes in children and pets

The occurrence of pesticides intended for non-agricultural use was investigated in 206 dust samples drawn from vacuum-cleaner bags from residential flats in Italy. The multi-residue analysis targeted on 95 different active principles was performed with UPLC-MS/MS, with a Limit of Quantification (LOQ) of 0.008 μg/g dry weight. The results indicated the presence of imidacloprid (IMI) and carbendazim (CARB) in 30% and 26% of the samples, with a mean and P95 concentration between 1.6 and 39 and between 0.08 and 4.9 μg/g, respectively. Combined presence of two biocides was noted in 19.4% samples, of three biocides in 9.2% samples, of four biocides in 3.4% samples, and of five and six biocides in 0.5% and 1% samples, respectively. According to the estimated dust intake in infants/toddlers aged 6–24 months (16–100 mg d^?1) and cats (200 mg d^?1), it was possible to obtain risk characterization with respect to the Acceptable Daily Intake (ADI) for IMI of 0.060 mg/kg body weight (bw) proposed by the European Food Safety Authority (EFSA) and the chronic Population Adjusted Dose (cPAD) of 0.019 mg/kg bw d^?1 by US-EPA. Under the worst-case scenario, the presence of IMI in dust indicates potential exceedance of the cPAD in kittens, to be considered as sentinel also accounting for combined exposure. This study highlights the relevance of consumer empowerment about the responsible use of pesticides as biocidal products in indoor environment.     

4-hours resolution data to study PM10 in a “hot spot” area in Europe

Nowadays, high-time resolved aerosol studies are mandatory to better understand atmospheric processes, such as formation, removal, transport, deposition or chemical reactions. This work focuses on PM10 physical and chemical characterisation with high-time resolution: elements (from Na to Pb), ions and OC/EC fractions concentration were determined during two weeks in summer and two in winter 2006 with 4-hours resolution. Further measurements aimed at hourly elemental characterisation of fine and coarse fractions and at the determination of particles number concentration in the 0.25-32 microm size range in 31 bins. The chemical mass closure was carried out in both seasons, enhancing intra-day differences in PM10 composition. In Milan, the highest contribution came from organic matter (34% and 33% in summer and winter, respectively); other important contributors were secondary inorganic compounds (16% and 24% in summer and winter, respectively) and, in summer, crustal matter (14%). Temporal trends showed strong variations in PM10 composition during contiguous time-slots and diurnal variations in different components contribution were identified. Moreover, peculiar phenomena, which would have hardly been detected with 24-hours samplings, were evidenced. Particles removal due to precipitations, aerosol local production and long range transport were studied in detail.     

Regional risk assessment for contaminated sites part 2: ranking of potentially contaminated sites

Environmental risks are traditionally assessed and presented in non spatial ways although the heterogeneity of the contaminants spatial distributions, the spatial positions and relations between receptors and stressors, as well as the spatial distribution of the variables involved in the risk assessment, strongly influence exposure estimations and hence risks. Taking into account spatial variability is increasingly being recognized as a further and essential step in sound exposure and risk assessment. To address this issue an innovative methodology which integrates spatial analysis and a relative risk approach was developed. The purpose of this methodology is to prioritize sites at regional scale where a preliminary site investigation may be required. The methodology aimed at supporting the inventory of contaminated sites was implemented within the spatial decision support sYstem for Regional rIsk Assessment of DEgraded land, SYRIADE, and was applied to the case-study of the Upper Silesia region (Poland). The developed methodology and tool are both flexible and easy to adapt to different regional contexts, allowing the user to introduce the regional relevant parameters identified on the basis of user expertise and regional data availability. Moreover, the used GIS functionalities, integrated with mathematical approaches, allow to take into consideration, all at once, the multiplicity of sources and impacted receptors within the region of concern, to assess the risks posed by all contaminated sites in the region and, finally, to provide a risk-based ranking of the potentially contaminated sites.     

Organic–Inorganic Hybrid Coatings for the Modification of Barrier Properties of Poly(lactic acid) Films for Food Packaging Applications

Organic–inorganic hybrid coatings based on poly(ε-caprolactone), poly(ethylene oxide) or poly(lactic acid) as organic phase and silica from tetraethoxysilane as inorganic phase were prepared by the sol–gel approach. Coatings were applied onto poly(lactic acid) films for food packaging in order to improve its barrier properties towards oxygen and water vapour. All the prepared coatings were dense, homogeneous layers characterized by a good adhesion to the substrate. The permeance of the coating layers resulted one order of magnitude lower than that of the uncoated poly(lactic acid) (PLA) film. The hydrophilic character of the coating did not permit to gain a significant decrease in the water vapour permeance. The perfect visual transparency of the coatings allows their application without worsening of the esthetical properties of the substrate PLA film.     

New developments on emerging organic pollutants in the atmosphere

BACKGROUND: The continuous progress in analytical techniques has improved the capability of detecting chemicals and recognizing new substances and extended the list of detectable contaminants widespread in all environmental compartments by human activities. Most concern is focused on water contamination by emerging compounds. By contrast, scarce attention is paid to the atmospheric sector, which in most cases represents the pathway of diffusion at local or global scale. Information concerning a list of organic pollutants is provided in this paper. METHODS: The volatile methyl tert-butyl ether and siloxanes are taken as examples of information insufficient with regard to the potential risk induced by diffusion in the atmosphere. Illicit drugs, whose presence in the air was ascertained although by far unexpected, are considered to stress the needs of investigating not solely the environmental compartments where toxic substances are suspected to display their major influence. Finally, the identification of two recognized emerging contaminants, i.e., tris(2-chloroisopropyl) phosphate and N,N-diethyl-m-toluamide, in aerosols originally run to characterize other target compounds is presented with the purpose of underlining the wide diffusion of the organic emerging contaminants in the environment.