Two stage fluid bed-plasma gasification process for solid waste valorisation: technical review and preliminary thermodynamic modelling of sulphur emissions

Gasification of solid waste for energy has significant potential given an abundant feed supply and strong policy drivers. Nonetheless, significant ambiguities in the knowledge base are apparent. Consequently this study investigates sulphur mechanisms within a novel two stage fluid bed-plasma gasification process. This paper includes a detailed review of gasification and plasma fundamentals in relation to the specific process, along with insight on MSW based feedstock properties and sulphur pollutant therein. As a first step to understanding sulphur partitioning and speciation within the process, thermodynamic modelling of the fluid bed stage has been performed. Preliminary findings, supported by plant experience, indicate the prominence of solid phase sulphur species (as opposed to H₂S) - Na and K based species in particular. Work is underway to further investigate and validate this.     

Methodology for quantification of waste generated in Spanish railway construction works

In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C&D) waste. Specifically, in 2006, Spain generated roughly 47million tons of C&D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C&D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C&D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C&D waste management in railway projects, by developing a model for C&D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C&D waste likely to be generated in railway construction projects, including the category of C&D waste generated for the entire project.     

Separation of Organic Materials and Metallic Elements from Marine Waters by the Operation of Gas-Bubble Extraction

A laboratory experimental investigation was conducted to define the action of rising bubbles with respect to heavy-metal enrichment at the sea surface. Analytical data (HMDE-differential pulse anodic stripping voltammetry technique) show possible enrichments of organic-bound Zn, Cu, Cd and Pb at the top of a laboratory bubble-extraction column filled with water samples collected in the Southern Tyrrhenian Sea. In consideration of analogy between natural and laboratory bubble-extraction processes, laboratory results, i.e., enriched-over-original concentration ratios, make it possible to assess the intrinsic heavy-metal flotation capability in marine waters.     

Heavy Metals in Epiphytic Mosses: An Experience in Florence

The epiphytic moss Hypnum cupressiforme has been used for passive monitoring of airborne heavy metals pollution by vehicular traffic in the urban area of Florence. Lead, cadmium, zinc and copper were determined by differential pulse anodic stripping voltammetry (DPASV). in the summer of 1993 about 30 samples were collected from the trunks of holm oak at the same height (1 metre) from the soil. Lead contents fall within the range of 0.02-1.08 μ moles g^-1 (dry weight) and for this metal, the emission source may be attributed mainly to vehicular traffic in poorly industrialized urban areas. Some evaluations have been carried out about the employment of Zn/Pb molar ratio for characterizing airborne pollution in urban areas.     

Detection of mutagens in unconcentrated and concentrated drinking water supplies before and after treatment using a microscale fluctuation test

The aim of this work was to study three different concentration methods coupled with the microscale fluctuation test for routine screening of different drinking water supplies before and after treatment. Unconcentrated samples were also tested. The results showed the formation of direct-acting mutagens in drinking water from surface sources after chlorination.     

Genetic diagnosis by chorionic villus sampling before 8 gestational weeks: Efficiency,reliability, and risks on 317 completed pregnancies

Transabdominal chorionic villus sampling (TA-CVS) was attempted in 328 high-risk pregnancies at 6–7 weeks of gestation. Sampling was feasible in 97.7 per cent of cases; chorionic tissue specimens of more than 10 mg were obtained in 94.4 per cent ofcases at the first needle insertion and in 100 per cent after a second attempt. Fetal karyotyping succeeded in 99.4 per cent of cases, while no diagnostic failures were reported in enzymatic and DNA analyses. Fetal loss rate in the first 4 weeks after CVS was significantly higher than in the later CVS series (7.2 vs. 2.5 per cent), but 50 per cent of losses were observed within 2 weeks in cases of inviable aneuploidies. A high incidence of severe limb abnormalities (1.6 per cent) was detected in pregnancies intended to continue, confirming the aetiological role of early CVS. Unclear visualization of the placental limits and poor control of the needle path are thought to be the main reasons for the vascular disruption of the chorionic plate, and thereby hypoxic embryo tissue damage. A better selection of cases, together with high-resolution vaginal ultrasound visualization, and analytical techniques requiring a minimal amount of tissue should avoid any teratogenic effect of early CVS.     

Value congruence,control, sense of community and demands as determinants of burnout syndrome among hospitality workers

Employees working in the hospitality industry are constantly exposed to occupational stressors that may lead employees into experiencing burnout syndrome. Research addressing the interactive effects of control, community and value congruence to alleviate the impact of workplace demands on experiencing burnout is relatively limited. The present study examined relationships among control, community and value congruence, workplace demands and the three components of burnout. A sample of 418 employees working in a variety of hospitality associations including restaurants and hotels in Spain were recruited. Moderation analyses and linear regressions analyzed the predictive power of control, community and value congruence as moderating variables. Results indicate that control, community and value congruence were successful buffers in the relationships between workplace demands and the burnout dimensions. The present findings offer suggestions for future research on potential moderating variables, as well as implications for reducing burnout among hospitality employees.     

Some Preliminary Observations On Zinc and Cadmium Accumulative Capacity in Arum Italicum Mill

Pot and hydroponic trials as well as tests on samples collected in a mining area and in two different urban sites of Tuscany were carried out on Arum italicum Mill (Italian arum) plants. Zinc and cadmium contents were determined by differential pulse anodic stripping voltammetry (DPASV) in different organs of about 180 samples. After 65 days treatment, zinc and cadmium median contents in leaves of plants grown hydroponically in solutions containing both metals at different concentrations fell within the range of 281-2022 and 8.3-45.1 μg g^-1 (dry weight), respectively. Some Italian arum plants were also cultivated in pots in the presence or absence of malate or citrate in order to evaluate the role of these ligands in zinc and cadmium accumulation. Citrate enhanced cadmium uptake compared to malate.