Modelling Tracer Dispersion from Landfills

Several wind tunnel experiments of tracer dispersion from reduced-scale landfill models are presented in this paper. Different experimental set-ups, hot-wire anemometry, particle image velocimetry and tracer concentration measurements were used for the characterisation of flow and dispersion phenomena nearby the models. The main aim of these experiments is to build an extensive experimental data set useful for model validation purposes. To demonstrate the potentiality of the experimental data set, a validation exercise on several mathematical models was performed by means of a statistical technique. The experiments highlighted an increase in pollutant ground level concentrations immediately downwind from the landfill because of induced turbulence and mean flow deflection. This phenomenon turns out to be predominant for the dispersion process. Tests with a different set-up showed an important dependence of the dispersion phenomena from the landfill height and highlighted how complex orographic conditions downwind of the landfill do not affect significantly the dispersion behaviour. Validation exercises were useful for model calibration, improving code reliability, as well as evaluating performances. The Van Ulden model proved to give the most encouraging results.     

Comparative study based on sediment characteristics and macrobenthic communities in two Italian lagoons

The aims of this study were to analyse sediment characteristics and macrobenthic assemblages in two very close Italian coastal lagoons (Lesina and Varano) and to assess the different behaviour between the two basins and the relationship between sediment matrix and benthic organisms within and between the two lagoons. The comparative study was performed in July 2007 at 13 sampling sites in Lesina lagoon and 15 sites in Varano basin for sediment grain size, total organic carbon (TOC), total nitrogen (TN), total phosphorus (TP) and macrobenthic structure analyses. Both lagoons were generally dominated by fine-grained sediments (clay and silt components). The average contents of TOC and TN measured in Lesina was higher than in Varano (3.31% vs 2.52% for TOC and 5,200 μg·g^???1 vs 3,713 μg·g^???1 for TN); in contrast, the TP was lower (540 μg·g^???1 vs 620 μg·g^???1). Based on macrobenthic community patterns, the central zone in Varano lagoon and the eastern area in Lesina lagoon were characterised by the lowest abundance (168.7 ind·m^???2 and 503.2 ind·m^???2, respectively) and by the lowest number of species, as highlighted by the diversity indices (Shannon–Wiener, H ^′ range was 0.47–1.45 for Lesina and 0.00–1.68 for Varano; Margalef species richness, d range was 0.00–1.67 for Lesina lagoon and 0.00–2.38 for Varano basin). Ordination diagrams suggested an influence of marine and freshwater inputs on the sediment distribution in Varano lagoon and on macrobenthic assemblages in Lesina lagoon.     

Environmental odours assessment from waste treatment plants: dynamic olfactometry in combination with sensorial analysers "electronic noses"

After an overview about the criteria of odour nuisance in different technical laws, about electronic noses analysers and about dynamic olfactometry, in the present paper the authors describe an application of dynamic olfactometry in combination with the determinations of electronic noses. The coordination of the two approaches permits optimisation of the advantages offered by both methods to the measurable and objective evaluation of the odour nuisance from waste treatment plants and chemical plants.     

POPs in the Lagoon of Venice: budgets and pathways

Dioxins and furans (PCDD/Fs), polychlorobiphenyls (PCBs) and hexachlorobenzene (HCB) in the ecosystem of the Lagoon of Venice were studied, in order to provide a general picture of conditions in the lagoon in terms of contamination by persistent organic pollutants (POPs). We present here novel data on atmospheric deposition, water, sediment and clam samples collected in the lagoon during the period January 2001-December 2004. Atmospheric deposition was sampled monthly at six sites located both close and far from large industrial and urban sources. Water samples were collected monthly from fifteen stations, and twenty-five samples of sediments and clams (Tapes philippinarum) were collected in four areas where clams are farmed and harvested inside the lagoon. All samples were analysed for PCDD/Fs, PCBs and HCB by HRGC/HRMS in the same laboratory. All samples examined (atmospheric deposition and water) substantially confirmed the spatial pattern reported in previously published data on sediments and atmospheric deposition: the zone surrounding the Porto Marghera petrochemical plant always had the highest levels of POPs (i.e., PCDD/Fs: atmosphere approximately 6 pg of 2,3,7,8-TCDD equivalents (I-TE) m(-2)d(-1); water 0.37 pg I-TEl(-1); sediment: 300 ng kg(-1); clam 2.8 pg I-TE g(-1)), and the minima were found at points on the margins of the lagoon (PCDD/Fs: atmosphere approximately 1 pg I-TEm(-2)d(-1); water 0.05 pg I-TEl(-1); sediment: approximately 5 ng kg(-1); clam approximately 0.2 pg I-TE g(-1)). Intermediate values were often encountered in the historical city centre of Venice and in the central part of the lagoon. To confirm this, new data on correlation between levels of PCDD/F in sediments and clams are reported, both for absolute values and for the PCDD/F "fingerprint". There is always a clear fingerprinting signature (PCDF/PCDD>1) for samples collected near Porto Marghera, and the opposite (PCDF/PCDD<1) in the rest of the lagoon.     

Is the diversity of epiphytic lichens a reliable indicator of air pollution? A case study from Italy

This work provided additional information for a better interpretation of lichen diversity values in biomonitoring studies of air pollution. The effects of 12 predictive variables were estimated for the Genova province (NW Italy) by means of a non-parametric model. The diversity of epiphytic lichens was strictly correlated with mean annual rainfall and mean annual temperature. Different variables were found to affect the lichen diversity in urban vs. forested areas. In urban areas, air pollutants, mainly SO2, are still the main limiting factor, even if under ameliorating conditions this relationship becomes less significant. In forested areas, harvesting and forest fires showed a predominant effect, suggesting the need to develop a more defined sampling protocol to estimate atmospheric pollution in such ecosystems.     

Validation and global uncertainty of a gas chromatographic with mass spectrometry method for fenamidone analysis in grapes and wines

Fenamidone is an imidazolinone fungicide recently introduced in viticulture practices. This work reports the validation and assessment of global uncertainty of a gas chromatographic with mass spectrometry method to analyze fenamidone in grapes and wines. This method consists in a simple and fast liquid-liquid extraction step followed by chromatographic determination. Limits of detection for fenamidone in grapes and wines were, respectively, 0.05 mg/kg and 0.06 mg/L, precision was below 9.4% and average recovery was 89 +/- 5%. In the concentration range from 0.05 to 1.00 mg/kg (or mg/L) of fenamidone, global uncertainty calculated following the EURACHEM/CITAC rules, and also by the Horwitz function, was below 25%. The EURACHEM/CITAC global uncertainty budget used gave lower estimates than those obtained from the Horwitz function.     

Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.     

Occurrence of phenols in leachates from municipal solid waste landfill sites in Japan

The concentrations of 41 phenols in leachates from 38 municipal solid waste (MSW) landfill sites in Japan were measured. The main phenols detected in leachates were phenol, three cresols, 4-tert-butylphenol, 4-tertoctylphenol, 4-nonylphenol, bisphenol A, and some chlorophenols. The concentration levels of phenols were affected by the pH values of the leachates and the different types of landfill waste. The origins of phenol and p-cresol were considered to be incineration residues, and the major origin of 4-tert-butylphenol, bisphenol A, and 2,4,6-trichlorophenol was considered to be solidified fly ash. In contrast, the major origins of 4-tert-octylphenol and 4-nonylphenol were considered to be incombustibles. The discharge of leachates to the environment around MSW landfill sites without water treatment facilities can cause environmental pollution by phenols. In particular, the disposal of incineration residues including solidified fly ash and the codisposal of solidified fly ash and incombustibles might raise the possibility of environmental pollution. Moreover, the discharge of leachates at pH values of 9.8 or more could pollute the water environment with phenol. However, phenol, 4-nonylphenol, and bisphenol A can be removed to below the con centration levels that impact the environment around landfill sites by a series of conventional water treatment processes.