A study on the activities of a few free radicals scavenging enzymes present in five roadside plants

The road side plants are continuously exposed to the high levels of oxides of nitrogen and sulphur dioxide, emitted from automobile. Resistance to automobile exhaust pollution was studied with Nerium indicum Mill, Boerhaavia diffusa L., Amaranthus spinosus L., Cephalandra indica Naud., and Tabernaemontana divaricata L., growing on the edges of Delhi Road, National Highway 2 (NH 2) near Dankuni, West Bengal. By analysing the activities of a few enzymes like superoxide dismutase, catalase, ascorbate peroxidase, glutathione reductase and phenolic peroxidase, it appears that among the five plants examined,Amaranthus and Cephalandra are equipped with a very good scavenging system to combat effects of air pollution.     

Mercury and organomercurial resistance in bacteria isolated from freshwater fish of wetland fisheries around Calcutta

Mercury-resistant bacteria belonging to the genera Bacillus, Escherichia, Klebsiella, Micrococcus, Pseudomonas, Salmonella, Sarcina, Shigella, Staphylococcus and Streptococcus were isolated from gills and guts of fresh water fish collected from wetland fisheries around Calcutta, India, contaminated with mercury compounds. The total number of bacteria, as well as Hg-resistant bacteria, were always higher in guts than gills. Bottom-dwelling fish contained higher number of bacteria, including Hg-resistant bacteria, than surface and middle water dwelling fish. They belonged either to narrow-spectrum or to broad-spectrum Hg-resistant groups and they also possessed other heavy metal and antibiotic resistant properties. In the presence of toxic levels of HgCl(2), phenylmercuric acetate (PMA) and methylmercuric chloride (MMC), the lag in growth of the bacterial strains gradually increased with increasing concentration of Hg-compounds. Narrow-spectrum Hg-resistant bacterial strains volatilized only HgCl(2) from the liquid medium in the range of 64-89%, whereas the broad-spectrum group exhibited a high level of HgCl(2) (80-94%), PMA (72-84%) and MMC (64-80%) volatilizing capacity with inducible mercuric reductase and organomercurial lyase enzyme activities in their cell-free extracts. Cell-free extracts prepared from narrow-spectrum Hg-resistant bacterial strains induced by HgCl(2) exhibited Hg(+2)-dependent NADPH oxidation, indicating the presence of only mercuric reductase enzyme.     

Carbonaceous aerosol emissions from India

Budget estimate for carbonaceous aerosols including black carbon (BC) and organic carbon, emitted from the combustion of various fuels, is very important for regional climate studies. Emission factors for carbonaceous aerosols from bio-fuels and soft coke were determined in a controlled combustion study. The emission factors thus obtained along with those available for other fossil fuels consumed in different sectors have been applied to assess the budget for carbonaceous aerosols from India. Preliminary calculations give a range of 1.6–1.8 Tg of carbonaceous aerosols that include 0.4–1.4 Tg of BC. A major (80%) portion of carbonaceous aerosols emitted from India is found to originate from the use of biomass for energy as 70–80% of energy requirement in rural India is met by combustion of traditional bio-fuels.     

Arsenic in groundwater in six districts of West Bengal,India

Arsenic in groundwater above the WHO maximum permissible limit of 0.05 mg l^–1 has been found in six districts of West Bengal covering an area of 34 000 km² with a population of 30 million. At present, 37 administrative blocks by the side of the River Ganga and adjoining areas are affected. Areas affected by arsenic contamination in groundwater are all located in the upper delta plain, and are mostly in the abandoned meander belt. More than 800 000 people from 312 villages/wards are drinking arsenic contaminated water and amongst them at least 175 000 people show arsenical skin lesions. Thousands of tube-well water in these six districts have been analysed for arsenic species. Hair, nails, scales, urine, liver tissue analyses show elevated concentrations of arsenic in people drinking arsenic-contaminated water for a longer period. The source of the arsenic is geological. Bore-hole sediment analyses show high arsenic concentrations in only few soil layers which is found to be associated with iron-pyrites. Various social problems arise due to arsenical skin lesions in these districts. Malnutrition, poor socio-economic conditions, illiteracy, food habits and intake of arsenic-contaminated water for many years have aggravated the arsenic toxicity. In all these districts, major water demands are met from groundwater and the geochemical reaction, caused by high withdrawal of water may be the cause of arsenic leaching from the source. If alternative water resources are not utilised, a good percentage of the 30 million people of these six districts may suffer from arsenic toxicity in the near future.     

Modelling of the contribution of dissolved inorganic nitrogen (DIN) from litterfall of adjacent mangrove forest to Hooghly–Matla estuary,India

Hooghly–Matla estuarine ecosystem of India is very rich in natural resources and receives large amount of nutrients through litterfall from adjacent mangrove forest. Nitrogen as an important nutrient occurs in various forms and plays a crucial role in the regulation of productivity in this estuarine system. Modelling of nitrogen dynamics from mangrove litterfall and particularly the release of dissolved inorganic nitrogen in this estuarine system is important because of its role in augmenting growth of phytoplankton and other higher plants and all other biological components of grazing food chain.     

Impact of raking and bioturbation-mediated ecological manipulation on sediment–water phosphorus diagenesis: a mesocosm study supported with radioactive signature

The study examined the impact of raking and fish bioturbation on modulating phosphorus (P) concentrations in the water and sediment under different trophic conditions. An outdoor experiment was set to monitor physicochemical and microbiological parameters of water and sediment influencing P diagenesis. A pilot study with radioactive ³²P was also performed under the agency of raking and bacteria (Bacillus sp.). Raking was more effective in release of P under unfertilized conditions by significantly enhancing orthophosphate (35%) and soluble reactive phosphate (31.8%) over respective controls. Bioturbation increased total and available P in sediments significantly as compared to control. The rates of increase were higher in the unfertilized conditions (17.6–28.4% for total P and 12.2 to 23.2% for available P) than the fertilized ones (6.5–12.4% for total P and 9.1 to 15% for available P). The combined effects of raking and bioturbation on orthophosphate and soluble reactive phosphate were also stronger under unfertilized state (54.5 and 81.8%) than fertilized ones (50 and 70%). The tracer signature showed that coupled action of introduced bacteria and repeated raking resulted in 59.2, 23 and 16% higher counts of radioactive P than the treatments receiving raking once, repeated raking and bacteria inoculation, respectively. Raking alone or in sync with bioturbation exerted pronounced impact on P diagenesis through induction of coupled mineralization and nutrient release. It has significant implication for performing regular raking of fish-farm sediments and manipulation of bottom-grazing fish to regulate mineralization of organic matter and release of obnoxious gases from the system. Further, they synergistically can enhance the buffering capacity against organic overload and help to maintain aquatic ecosystem health.

     

Chemical characteristics and source apportionment of PM<Subscript>2.5</Subscript> using PCA/APCS,UNMIX, and PMF at an urban site of Delhi,India

The present study investigated the comprehensive chemical composition [organic carbon (OC), elemental carbon (EC), water-soluble inorganic ionic components (WSICs), and major & trace elements] of particulate matter (PM_2.5) and scrutinized their emission sources for urban region of Delhi. The 135 PM_2.5 samples were collected from January 2013 to December 2014 and analyzed for chemical constituents for source apportionment study. The average concentration of PM_2.5 was recorded as 121.9 ± 93.2 μg m^?3 (range 25.1–429.8 μg m^?3), whereas the total concentration of trace elements (Na, Ca, Mg, Al, S, Cl, K, Cr, Si, Ti, As, Br, Pb, Fe, Zn, and Mn) was accounted for ～17% of PM_2.5. Strong seasonal variation was observed in PM_2.5 mass concentration and its chemical composition with maxima during winter and minima during monsoon seasons. The chemical composition of the PM_2.5 was reconstructed using IMPROVE equation, which was observed to be in good agreement with the gravimetric mass. Source apportionment of PM_2.5 was carried out using the following three different receptor models: principal component analysis with absolute principal component scores (PCA/APCS), which identified five major sources; UNMIX which identified four major sources; and positive matrix factorization (PMF), which explored seven major sources. The applied models were able to identify the major sources contributing to the PM_2.5 and re-confirmed that secondary aerosols (SAs), soil/road dust (SD), vehicular emissions (VEs), biomass burning (BB), fossil fuel combustion (FFC), and industrial emission (IE) were dominant contributors to PM_2.5 in Delhi. The influences of local and regional sources were also explored using 5-day backward air mass trajectory analysis, cluster analysis, and potential source contribution function (PSCF). Cluster and PSCF results indicated that local as well as long-transported PM_2.5 from the north-west India and Pakistan were mostly pertinent.     

Preparation of char from lotus seed biomass and the exploration of its dye removal capacity through batch and column adsorption studies

Char was obtained from lotus seed biomass by a simple single-step acid treatment process. It was used as an adsorbent for the removal of malachite green dye (MG) from simulated dye bath effluent. The adsorbent was characterized for its surface morphology, surface functionalities, and zero point charge. Batch studies were carried out by varying the parameters such as initial aqueous pH, adsorbent dosage, adsorbent particle size, and initial adsorbate concentration. Langmuir and Freundlich isotherms were used to test the isotherm data and the Freundlich isotherm best fitted the data. Thermodynamic studies were carried out and the thermodynamic parameters such as ?G, ?H, and ?S were evaluated. Adsorption kinetics was carried out and the data were tested with pseudofirst-order model, pseudosecond-order model, and intraparticle diffusion model. Adsorption of MG was not solely by intraparticle diffusion but film diffusion also played a major role. Continuous column experiments were also conducted using microcolumn and the spent adsorbent was regenerated using ethanol and was repeatedly used for three cycles in the column to determine the reusability of the regenerated adsorbent. The column data were modeled with the modeling equations such as Adam-Bohart model, Bed Depth Service Time (BDST) model, and Yoon-Nelson model for all the three cycles.     

Heterocatalytic Fenton oxidation process for the treatment of tannery effluent: kinetic and thermodynamic studies

Background, aim, scope

Treatment of wastewater has become significant with the declining water resources. The presence of recalcitrant organics is the major issue in meeting the pollution control board norms in India. The theme of the present investigation was on partial or complete removal of pollutants or their transformation into less toxic and more biodegradable products by heterogeneous Fenton oxidation process using mesoporous activated carbon (MAC) as the catalyst.

Materials and methods

Ferrous sulfate (FeSO₄·7H₂O), sulfuric acid (36?N, specific gravity 1.81, 98% purity), hydrogen peroxide (50% v/v) and all other chemicals used in this study were of analytical grade (Merck). Two reactors, each of height 50?cm and diameter 6?cm, were fabricated with PVC while one reactor was packed with MAC of mass 150?g and other without MAC served as control.

Results and discussion

The oxidation process was presented with kinetic and thermodynamic constants for the removal of COD, BOD, and TOC from the wastewater. The activation energy (Ea) for homogeneous and heterogeneous Fenton oxidation processes were 44.79 and 25.89?kJ/mol, respectively. The thermodynamic parameters ??G, ??H, and ??S were calculated for the oxidation processes using Van??t Hoff equation. Furthermore, the degradation of organics was confirmed through FTIR and UV?Cvisible spectroscopy, and cyclic voltammetry.

Conclusions

The heterocatalytic Fenton oxidation process efficiently increased the biodegradability index (BOD/COD) of the tannery effluent. The optimized conditions for the heterocatalytic Fenton oxidation of organics in tannery effluent were pH 3.5, reaction time?C4?h, and H₂O₂/FeSO₄·7H₂O in the molar ratio of 2:1.