Climate,land, energy and water (CLEW) interlinkages in Burkina Faso: An analysis of agricultural intensification and bioenergy production

This paper discusses climate, land, energy and water (CLEW) interactions in Burkina Faso. It shows that integrated assessments of resource use at the national level can provide important insights and benefits, especially for a resource constrained least developed country. Agricultural policy is shown to have strong implications for energy use, whereas energy policies are found to be strongly interrelated with water constraints. Without an integrated and coordinated approach, strategy and policy formulation efforts to increase energy, food and water security could become both incoherent and counter‐productive.     

Toxic effects of four sulphonylureas herbicides on soil microbial biomass

The effect of four triazinyl-sulfonylurea herbicides (cinosulfuron, prosulfuron, thifensulfuron methyl, triasulfuron) on soil microbial biomass, soil respiration, metabolic activity, metabolic quotient, and some enzymatic activities (acid and alkaline phosphatase, β-glucosidase, arylsulphatase, and fluorescein diacetate hydrolysis) were monitored under controlled conditions over 30 days. The herbicides were applied at the normal field dose (FD) and at ten-fold (10 FD) the field dose, in order to mimic a long term toxic effect. The measured soil microbial parameters showed that the FD had slight effects on soil microflora, while at 10 FD the tested herbicides exerted a stronger detrimental effect on soil microbial biomass and its biochemical activities.     

Chemical, dimensional and morphological ultrafine particle characterization from a waste-to-energy plant

Waste combustion processes are responsible of particles and gaseous emissions. Referring to the particle emission, in the last years specific attention was paid to ultrafine particles (UFPs, diameter less than 0.1 μm), mainly emitted by combustion processes. In fact, recent findings of toxicological and epidemiological studies indicate that fine and ultrafine particles could represent a risk for health and environment. Therefore, it is necessary to quantify particle emissions from incinerators also to perform an exposure assessment for the human populations living in their surrounding areas.To these purposes, in the present work an experimental campaign aimed to monitor UFPs was carried out at the incineration plant in San Vittore del Lazio (Italy). Particle size distributions and total concentrations were measured both at the stack and before the fabric filter inlet in order to evaluate the removal efficiency of the filter in terms of UFPs. A chemical characterization of UFPs in terms of heavy metal concentration was performed through a nuclear method, i.e. Instrumental Neutron Activation Analysis (INAA), as well as a mineralogical investigation was carried out through a Transmission Electron Microscope (TEM) equipped with an Energy Dispersive Spectrometer (EDS) in order to evaluate shape, crystalline state and mineral compound of sampled particles.Maximum values of 2.7 × 10⁷ part. cm⁻³ and 2.0 × 10³ part. cm⁻³ were found, respectively, for number concentration before and after the fabric filter showing a very high efficiency in particle removing by the fabric filter. With regard to heavy metal concentrations, the elements with higher boiling temperature present higher concentrations at lower diameters showing a not complete evaporation in the combustion section and the consequent condensation of semi-volatile compounds on solid nuclei. In terms of mineralogical and morphological analysis, the most abundant compounds found in samples collected before the fabric filter are Na–K–Pb oxides followed by phyllosilicates, otherwise, different oxides of comparable abundance were detected in the samples collected at the stack.     

Development of monoclonal antibody-based immunoassays for the analysis of bisphenol A in canned vegetables

The aim of this work was the development of monoclonal antibodies (MAbs) and highly sensitive immunoassays (ELISAs) to bisphenol A (BPA), a well-known endocrine disruptor able to migrate from the internal coating of cans to food contained inside, particularly vegetables. To produce MAbs to BPA, four synthetic compounds were conjugated to proteins and used as immunizing haptens in mice. By applying hybridoma technology, several MAbs were produced and selected. These antibodies were characterized in the conjugate-coated and in the antibody-coated formats, using both homologous and heterologous conjugates. Three indirect ELISA based on the MAbs showing the highest affinity to BPA were selected. The limit of detection of the most sensitive ELISA was 0.22 nM (0.05 ng/mL), with an I?? value of around 1 nM (0.23 ng/mL). An homologous ELISA based on the MAb BPAB-11 was applied to the simple, direct determination of BPA in the liquid portion of canned artichoke, peas, and sweet corn. Only sample dilution in an appropriate saline buffer was required to minimize matrix effects and to enter the ELISA working range. Recovery and precision of the method were evaluated by spiking the liquid portion of these cans with BPA at 20, 50, and 100 ng/mL. Coefficients of variation were below 20% in most cases. With regard to recovery, the analytical data obtained were also acceptable. This immunoassay has therefore proved its potential as a new tool for the rapid, sensitive and accurate determination of BPA in canned food.     

An object-based image analysis approach for aquaculture ponds precise mapping and monitoring: a case study of Tam Giang-Cau Hai Lagoon, Vietnam

Monitoring and mapping shrimp farms, including their impact on land cover and land use, is critical to the sustainable management and planning of coastal zones. In this work, a methodology was proposed to set up a cost-effective and reproducible procedure that made use of satellite remote sensing, object-based classification approach, and open-source software for mapping aquaculture areas with high planimetric and thematic accuracy between 2005 and 2008. The analysis focused on two characteristic areas of interest of the Tam Giang-Cau Hai Lagoon (in central Vietnam), which have similar farming systems to other coastal aquaculture worldwide: the first was primarily characterised by locally referred “low tide” shrimp ponds, which are partially submerged areas; the second by earthed shrimp ponds, locally referred to as “high tide” ponds, which are non-submerged areas on the lagoon coast. The approach was based on the region-growing segmentation of high- and very high-resolution panchromatic images, SPOT5 and Worldview-1, and the unsupervised clustering classifier ISOSEG embedded on SPRING non-commercial software. The results, the accuracy of which was tested with a field-based aquaculture inventory, showed that in favourable situations (high tide shrimp ponds), the classification results provided high rates of accuracy (>95 %) through a fully automatic object-based classification. In unfavourable situations (low tide shrimp ponds), the performance degraded due to the low contrast between the water and the pond embankments. In these situations, the automatic results were improved by manual delineation of the embankments. Worldview-1 necessarily showed better thematic accuracy, and precise maps have been realised at a scale of up to 1:2,000. However, SPOT5 provided comparable results in terms of number of correctly classified ponds, but less accurate results in terms of the precision of mapped features. The procedure also demonstrated high degrees of reproducibility because it was applied to images with different spatial resolutions in an area that, during the investigated period, did not experience significant land cover changes.     

Identification of stationary sources of air pollutants by concentration statistical analysis

The atmospheric concentrations of benzene, toluene, ethylbenzene and isomeric xylenes (BTEX) in a medium-sized town (S. Maria Capua Vetere, about 32000 inhabitants, Southern Italy) have been determined during working days and weekends in 2006. The procedure used was 24h passive adsorption by samplers distributed throughout the town followed by GC/MS analysis. On a yearly base, the arithmetic mean benzene concentrations were above the limit required by the 2000/69/CE European Directive. The Pearson correlation coefficients of the 24h geometric mean BTEX concentrations were indicative of stationary sources of toluene located in a well circumscribed area of the urban territory, active only during the working days and not officially recognized. The results highlight the effectiveness of the statistical approach used in this study for the identification of pollutant sources.     

Brazilian Amazonia: Industrial development and environmental monitoring

After a critical analysis of the strategies for conservation of the environment in Latin America and of large-scale development projects (agriculture and livestock raising, mining and electrical power plants) in the Amazon region of Brazil, this paper deals with the use of high-resolution satellite imagery for environmental monitoring. Two areas were considered in the study, Tucurui and Altamira. Spot/XS and Landsat/TM multispectral images were used, together with color aerial photographs of these areas. A computer-assisted visual interpretation procedure was employed to analyze images, and linear multispectral transformation was applied in selected subscenes in order to improve information extraction. The results indicate that high-resolution satellite imagery is generally compatible with the scale of the environmental problems in Amazonia and is a very efficient source of detailed information at a local scale on many aspects of the environment, in particular for monitoring changes over time in selected areas. Therefore, commercial satellite imagery, processed by specialized software, can accommodate a variety of analysis needs for decision makers and can also be an effective means of verification of international agreements on conservation of the environment in Amazonia.