Echelon approach to areas of concern in synoptic regional monitoring

Echelons provide an objective approach to prospecting for areas of potential concern in synoptic regional monitoring of a surface variable. Echelons can be regarded informally as stacked hill forms. The strategy is to identify regions of the surface which are elevated relative to surroundings (Relative ELEVATIONS or RELEVATIONS). These are areas which would continue to expand as islands with receding (virtual) floodwaters. Levels where islands would merge are critical elevations which delimit echelons in the vertical dimension. Families of echelons consist of surface sectors constituting separate islands for deeper waters that merge as water level declines. Pits which would hold water are disregarded in such a progression, but a complementary analysis of pits is obtained using the surface as a virtual mould to cast a counter-surface (bathymetric analysis). An echelon tree is a family tree of echelons with peaks as terminals and the lowest level as root. An echelon tree thus provides a dendrogram representation of surface topology which enables graph theoretic analysis and comparison of surface structures. Echelon top view maps show echelon cover sectors on the base plane. An echelon table summarizes characteristics of echelons as instances or cases of hill form surface structure. Determination of echelons requires only ordinal strength for the surface variable, and is thus appropriate for environmental indices as well as measurements. Since echelons are inherent in a surface rather than perceptual, they provide a basis for computer-intelligent understanding of surfaces. Echelons are given for broad-scale mammalian species richness in Pennsylvania.     

Identification of the largest individual sample value using composite sample data and certain modifications of the sweep-out method

Cost-effective hotspot identification is an important issue in hazardous waste site characterization and evaluation. Composite sampling techniques are known to be cost effective when the cost of measurement is substantially higher than the cost of sampling. Although compositing incurs no loss of information on the means, information on individual sample values is lost due to compositing. In particular, if the interest is in identifying the largest individual sample value, the composite sampling techniques are not able to do so. Under certain assumptions, it may be possible to satisfactorily predict individual sample values using the composite sample data, but it is not generally possible to identify the largest individual sample value. In this paper, we propose two methods of identifying the largest individual sample value with some additional measurement effort. Both methods are modifications of the simple sweep-out method proposed earlier. Since analytical results do not seem to be feasible, performance of the proposed methods is assessed via simulation. The simulation results show that both the proposed methods, namely the locally sequential sweep-out and the globally sequential sweep-out, are better than the simple sweep-out method.Prepared with partial support from the Statistical Analysis and Computing Branch, Environmental Statistics and Information Division, Office of Policy, Planning, and Evaluation, United States Environmental Protection Agency, Washington, DC under a Cooperative Agreement Number CR-821531. The contents have not been subjected to Agency review and therefore do not necessarily reflect the views of the Agency and no official endorsement should be inferred.     

Size Distribution of Aerosols (PM10) and Lead (Pb) near Traffic Intersections in Mumbai (India)

The size distribution of aerosols was measured near traffic intersections of Marol link road in air quality control region (AQCR1), which is a moderately industrial area and Dadar Khodad circle in AQCR2, which is a heavily commercial core of the Mumbai City. The reason behind selecting the two unidentical regions was to study the contribution from vehicles to the size separated PM10 and that of Pb. It is recognised that particulates in urban air are responsible for serious health effects. As very small particles are assumed to be important for the adverse health effects, the particle size distribution is thus an important factor that needs to be addressed whenever the particulates pollution is concerned. The size measurements were done with a cascade impactor of eight stages with a back-up filter. It effectively separates the particulate matter into nine-sizes ranging from 0.0-0.4 to 9.0-10.0 microm. Samples were analysed in nine-particle size fractions with special reference to a toxic metal - lead (Pb) by atomic absorption spectrophotometry (AAS). It was found that PM10 and Pb at both the intersections could easily be classified by the size distribution. The fractions of the PM10 and that of Pb showing a tendency of trimodal distributions with the first peak at coarse mode approximately 9.0-10.0 microm, second at approximately 5.8 microm and the third at coarse mode approximately1.1 microm. The significant percentage of Pb was found in the range below 2.5 microm at both the intersections. However, Pb in AQCR1 is found in the coarser range as well, which could probably be the influence of various industrial activities in the area. PM10 concentration values in the coarser range in AQCR2 are associated with the resuspension of dust particles and mechanical erosions.     

Gas chromatographic studies on the biodegradation of nitrobenzene and 2,4-dinitrophenol in the nitrobenzene plant wastewater

The biodegradation of nitrobenzene (NB) and 2,4-dinitrophenol (DNP) in NB plant wastewater has been studied using acclimated activated sludge in a batch bioreactor. The gas chromatographic (GC) monitoring shows simultaneous utilization of these two substrates, and both NB and DNP were ultimately biodegraded. The primary and ultimate biodegradation rates using GC and COD methods, respectively, are compared and reported.     

Fetal karyotype following ascertainment of fetal anomalies by ultrasound

Data pooled from contributors to a Registry for Cytogenetic Abnormalities and PKU (ReCAP) shows an unbalanced chromosome abnormality rate of 27 per cent (29 fetuses) for 107 fetuses with ultrasonically diagnosed fetal anomalies. Of the abnormal, 12 were trisomic, 6 were monosomy X and 6 were structural abnormalities, 4 were mosaics and one triploid.     

Degradation of tannic acid by cold-adapted <Emphasis Type="BoldItalic">Klebsiella</Emphasis> sp NACASA1 and phytotoxicity assessment of tannic acid and its degradation products

Background, aim, and scope  

The focus of the present study is to know the potential of bacterial isolate for tannic acid degradation at low temperature. Also, we tried to evaluate the suitability of phytotoxicity testing protocol for the determination of tannic acid toxicity.     

Thermocatalytic Degradation of High Density Polyethylene into Liquid Product

Thermocatalytic degradation of high density polyethylene (HDPE) was carried out using acid activated fire clay catalyst in a semi batch reactor. Thermal pyrolysis was performed in the temperature range of 420–500 °C. The liquid and gaseous yields were increased with increase in temperature. The liquid yield was obtained 30.1 wt% with thermal pyrolysis at temperature of 450 °C, which increased to 41.4 wt% with catalytic pyrolysis using acid activated fire clay catalyst at 10 wt% of catalyst loading. The composition of liquid products obtained by thermal and catalytic pyrolysis was analyzed by gas chromatography-mass spectrometry and compounds identified for catalytic pyrolysis were mainly paraffins and olefins with carbon number range of C₆–C₁₈. The boiling point was found in the range of commercial fuels (gasoline, diesel) and the calorific value was calculated to be 42 MJ/kg.     

Air quality mapping using GIS and economic evaluation of health impact for Mumbai City,India

Mumbai, a highly populated city in India, has been selected for air quality mapping and assessment of health impact using monitored air quality data. Air quality monitoring networks in Mumbai are operated by National Environment Engineering Research Institute (NEERI), Maharashtra Pollution Control Board (MPCB), and Brihanmumbai Municipal Corporation (BMC). A monitoring station represents air quality at a particular location, while we need spatial variation for air quality management. Here, air quality monitored data of NEERI and BMC were spatially interpolated using various inbuilt interpolation techniques of ArcGIS. Inverse distance weighting (IDW), Kriging (spherical and Gaussian), and spline techniques have been applied for spatial interpolation for this study. The interpolated results of air pollutants sulfur dioxide (SO₂), nitrogen dioxide (NO₂) and suspended particulate matter (SPM) were compared with air quality data of MPCB in the same region. Comparison of results showed good agreement for predicted values using IDW and Kriging with observed data. Subsequently, health impact assessment of a ward was carried out based on total population of the ward and air quality monitored data within the ward. Finally, health cost within a ward was estimated on the basis of exposed population. This study helps to estimate the valuation of health damage due to air pollution.

Implications: Operating more air quality monitoring stations for measurement of air quality is highly resource intensive in terms of time and cost. The appropriate spatial interpolation techniques can be used to estimate concentration where air quality monitoring stations are not available. Further, health impact assessment for the population of the city and estimation of economic cost of health damage due to ambient air quality can help to make rational control strategies for environmental management. The total health cost for Mumbai city for the year 2012, with a population of 12.4 million, was estimated as USD8000 million.     

Use of best linear unbiased prediction for hot spot identification in two-way compositing

Compositing of individual samples is a cost-effective method for estimating a population mean, but at the expense of losing information about the individual sample values. The largest of these sample values (hotspot) is sometimes of particular interest. Sweep-out methods attempt to identify the hotspot and its value by quantifying a (hopefully, small) subset of individual values as well as the usual quantification of the composites. Sweep-out design is concerned with the sequential selection of individual samples for quantification on the basis of all earlier quantifications (both composite and individual). The design-goal is for the number of individual quantifications to be small (ideally, minimal). Previous sweep-out designs have applied to traditional (i.e., disjoint) compositing. This paper describes a sweep-out design suitable for two-way compositing. That is, the individual samples are arranged in a rectangular array and a composite is formed from each row and also from each column. At each step, the design employs all available measurements (composite and individual) to form the best linear unbiased predictions for the currently unquantified cells. The cell corresponding to the largest predicted value is chosen next for individual measurement. The procedure terminates when the hotspot has been identified with certainty.     

Degradation kinetics of forchlorfenuron in typical grapevine soils of India and its influence on specific soil enzyme activities

The rate of degradation of forchlorfenuron, a cytokinin-based plant growth regulator (PGR) was explored in typical grapevine soils of India with simultaneous evaluation of its effect on biochemical attributes of the test soils in terms of the activities of specific soil microbial enzymes. In all the test soils, namely clay, sandy-loam and silty-clay, the dissipation rate was faster at the beginning, which slowed down with time, indicating a non-linear pattern of degradation. Degradation in soils could best be explained by two-compartment 1st + 1st order kinetics with half-life ranging between 4–10 days. The results suggest that organic matter might be playing a major role in influencing the rate of degradation of forchlorfenuron in soil. The rate of degradation in sandy-loam soil was fastest followed by clay and silty-clay soils, respectively. Comparison of the rate of degradation in natural against sterilized soils suggests that microbial degradation might be the major pathway of residue dissipation. Changes in soil enzyme activities as a consequence of forchlorfenuron treatment were studied for extra-cellular enzymes namely acid phosphatase, alkaline phosphatase and β -glucosidase and intracellular enzyme-dehydrogenase. Although small changes in enzyme activities were observed, forchlorfenuron did not have any significant deleterious effect on the enzymatic activity of the test soils. Simple correlation studies between degradation percentage and individual enzyme activities did not establish any significant relationships. The pattern and change of enzyme activity was primarily the effect of the incubation period rather than the effect of forchlorfenuron itself.